12 best pennzoil 2 cycle oils
Pennzoil 2-cycle oils are automotive lubricants designed for use in two-stroke engines. These engines are commonly found in various applications, including motorcycles, outboard boat motors, chainsaws, and some small garden equipment. Here is some information about Pennzoil 2-cycle oils:
Two-Stroke Engines: Two-stroke engines are internal combustion engines that complete a power cycle in two strokes of the piston, as opposed to the four strokes in a typical four-stroke engine. They are known for their simplicity and lightweight design, making them suitable for small, portable devices.
Engine Lubrication: Two-stroke engines require oil to be mixed with the fuel. This oil not only lubricates the engine's moving parts but also serves as a coolant and helps seal the combustion chamber. Proper lubrication is critical to the longevity and performance of two-stroke engines.
Pennzoil: Pennzoil is a well-known brand in the automotive lubricant industry. They offer a range of motor oils, including 2-cycle oils, designed to meet the specific needs of two-stroke engines.
Types of Pennzoil 2-Cycle Oils: Pennzoil offers different types of 2-cycle oils, including mineral-based and synthetic options. The choice between mineral or synthetic oil may depend on factors like the engine manufacturer's recommendations and the operating conditions of the equipment.
Oil-to-Fuel Ratio: When using Pennzoil 2-cycle oils, it's essential to follow the manufacturer's recommendations regarding the proper oil-to-fuel ratio. Different engines may require different ratios, typically ranging from 1:16 to 1:50 (oil to fuel), depending on the engine type and usage.
Benefits: Using a high-quality 2-cycle oil like Pennzoil can provide several benefits, including improved engine protection, reduced exhaust emissions, and smoother engine operation. Proper lubrication helps prevent overheating and premature wear.
Application: Pennzoil 2-cycle oils are suitable for a wide range of applications, from small handheld equipment to larger recreational vehicles that use two-stroke engines. Always refer to the specific product label for guidance on its intended applications.
Environmental Considerations: It's important to dispose of used 2-cycle oil and gasoline mixtures properly. Many areas have recycling programs or facilities for used oil and other hazardous materials to protect the environment.
When using Pennzoil 2-cycle oils or any other lubricants in two-stroke engines, it's crucial to adhere to the manufacturer's recommendations for the specific engine model and follow proper mixing procedures.Using the right oil and maintaining the correct oil-to-fuel ratio will help ensure the longevity and performance of your equipment.
Below you can find our editor's choice of the best pennzoil 2 cycle oils on the marketProduct description
Pennzoil marine xlf extended life formula outboard 2-cycle synthetic blend oil was developed for engines that are "seasoned" or have been in service for a few years. The robust formulation makes marine xlf extended life formula outboard 2-cycle synthetic blend oil also very suitable for new high-displacement/horsepower carbureted or direct injection outboard motors. It contains only ash less components which helps prevent any lubricant related resignation and spark plug fouling. It's anti-gel properties help resist gel formation due to water or other contamination.
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
- Xlf outboard two-cycle oil mixes easily with gasoline, and is dyed Blue to allow for easy detection. Follow engine manufacturer's recommended fuel/oil ratio for premix systems
- Maximum additive treatment, including increased detergency over the TC-W3 formulation
- Nmma TC-W3 certified
- Protect against piston-scuffing
- Keep performance-robbing carbon deposits from forming in the combustion chamber, piston tops and under crowns and piston-combustion rings
User questions & answers
Question: | Will this oil be good for a 1970-1974 ted Williams sears 7.5 outboard engine |
Answer: | Yes |
Question: | is this oil ok for stihl back pak blowers |
Answer: | If you unit is a 2 stroke engine it will be fine. |
Question: | I have a 1984 90 hp yamaha. never used anything but yamalube. will the pennzoil work for me |
Answer: | Yes...to be honest they all work as long as it say marine in its the right mix you need for your boat...If you get stuck in a sticky situation you can use regular two-stroke to get you back home safe |
Question: | Would this work on a Kawasaki 550sx stand up jet ski at a 40:1 ratio |
Answer: | Yes, it's a good 2 stroke oil when mixed in the proper ratio. I use it in my outboard and chainsaw. |
Product features
Pennzoil Marine XLF Engine Oil
Description:
Developed for marine engines that are “seasoned” or have been in service for a few years, the robust formulation makes Pennzoil Marine XLF Extended Life Formula TC-W3 Outboard 2-Cycle Synthetic Blend Oil very suitable for new high-displacement/horsepower carbureted or direct injection outboard motors. Pennzoil Marine XLF Extended Life Formula TC-W3 Outboard 2-Cycle Synthetic Blend Oil is formulated to provide excellent protection against piston-scuffing and reduced wear. Whether fishing or leisure boating, commercial or recreational, Pennzoil Marine XLF will help keep your investment running smooth and strong for years. Recommended for engines with oil injection systems or for pre-mix. Meets engine requirements for Johnson/Evinrude/OMC, Mercury Marine, Yamaha, Suzuki, Nissan, Force/US Marine, Mariner, and others.
- Keep your engine running clean
- Guard against harmful engine deposits
- Protect against piston-scuffing
- Keep performance-robbing carbon deposits from forming in the combustion chamber, piston tops, and under crowns and piston-combustion rings
- Keep exhaust ports clean
Product description
Pennzoil 2-cycle premium plus outboard marine oil for outboard motors is specially designed for 2-cycle gasoline marine applications and formulated to help protect outboard engines under the most severe operating conditions. This oil is compatible with outboard motors made by Johnson/Evinrude, Mercury marine, Yamaha, Suzuki, Nissan, force/us marine, Mariner, sears and All other manufacturers requiring NMMA TC-W3 oil.
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
- Formulated to keep your marine engine running clean
- Also acts as a multipurpose gear oil
- Guard against harmful engine deposits
- Protect against piston-scuffing
- Keep performance-robbing carbon deposits from forming in the combustion chamber, piston tops and under crowns and piston-combustion rings
User questions & answers
Question: | is this a synethic blend or a full synethic |
Answer: | Synthetic blend. |
Question: | Why is this about $6 more a gallon if I ordered the box of three instead of ordering 1 gallon |
Answer: | I noticed that as well. So I just ordered 3 single gallons. |
Question: | I am using evinrude/ johnson xd50 synergies blend on my johnson 200hp ocean runner, is penzoil plus or cfc equal |
Answer: | 100% |
Question: | Would this be ok for a polaris pwc |
Answer: | Can't really say. Have never had or used a PWC. I have a 150 hp outboard. This is a very good oil. I've used it for years with no adverse effects. Ask your local PWC dealer. Good luck. |
Product features
Pennzoil Marine Premium Plus Outboard 2 Cycle Oil
Description:
Pennzoil Marine Premium Plus 2-cycle Synthetic Blend Oil is specially designed for exceptional performance in marine applications. It’s formulated with an extra level of performance additives to protect outboard engines under the most severe operating conditions. Pennzoil Marine Premium Plus 2-cycle Synthetic Blend Oil is recommended for pre-mix and injector systems including today's modern direct-injection engines. It meets or exceeds the most stringent engine manufacturer including Johnson/Evinrude, Mercury Marine, Yamaha, Suzuki, Nissan, Force/US Marine, Mariner, and others.
- Helps keep spark plugs clean
- Helps protect against piston-scuffing
- Helps keep exhaust ports clean
- Helps protect against ring-sticking
Product description
Pennzoil Premium Outboard and Multi-Purpose 2-cycle Engine Oil for outboard motors is specially designed for 2-cycle gasoline marine applications and formulated to help protect outboard engines under the most severe operating conditions. This oil is compatible with outboard motors made by Johnson/Evinrude, Mercury Marine, Yamaha, Suzuki, Nissan, Force/US Marine, Mariner, Sears and all other manufacturers requiring NMMA TC-W3 oil.
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
- Formulated to keep your marine engine running clean
- Also acts as a multipurpose gear oil
- Guard against harmful engine deposits
- Protect against piston-scuffing
- Keep performance-robbing carbon deposits from forming in the combustion chamber, piston tops and under crowns and piston-combustion rings
User questions & answers
Question: | can this oil be used in a 2 cycle chainsaw |
Answer: | not sure I am using it in oil injected 4 wheeler ( 2 cycle) |
Question: | Looking for a 2 cycle oil for an 1990 Mercury Mariner, can I use a synthetic blend in it without risking anything |
Answer: | I ran it in older 1995 Johnson and a 1998 Merc 200. When I sold them and bought a new 4 stroke I gave what had left and it was a few gallons. My friend has vintage 2 stroke MC and 80s Johnson. We have had good luck with the Pennzoil blends. I get less smoke. I have also used it in actually a 35 Mariner again 80's and 2 stroke lawn equipment. Never had a problem. Be careful not to switch to straight synthetic, that can be tricky but you should be fine with blend. You can always check with the engine manufacturer. G |
Question: | The picture shows 2 cycle outdoor oil multipurpose ! Can this be used for air cooled engines also |
Answer: | Go to the Pennzoil Web site for more info. I have used it in my Echo line trimmer at 50/1 for about 8 hours of heavy weed whacking with no problems. |
Question: | Can i use this for my 2 cycle echo 50:1 gas mixes and is it equivalent or better than the echo branded oil |
Answer: | Yes. 50:1, 100:1 and better quality |
Product description
Pennzoil 2-Cycle Premium Plus Outboard Marine Oil for outboard motors is specially designed for 2-cycle gasoline marine applications and formulated to help protect outboard engines under the most severe operating conditions. It meets or exceeds the highest NMMA FC-W requirements and the most stringent engine manufacturer warranties including Mercury Marine, Yamaha, Suzuki, Honda and Nissan.
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
- Formulated to keep your marine engine running clean
- Designed for outboard motors
- Guard against harmful engine deposits
- Protect against piston-scuffing
- Keep performance-robbing carbon deposits from forming in the combustion chamber, piston tops and under crowns and piston-combustion rings
Product description
Pennzoil Premium Outboard and Multi-Purpose Two-Cycle oil is certified by the National Marine Manufacturer's Association as an approved NMMA TC-W3 lubricant. It contains Pennzoil premium quality lubricating oil plus ash less additives and increased detergency to give the best quality protection in all types of high performance two-cycle engines calling for TC-W, TC-WII, and TC-W3 oils. Premium Outboard and Multi-Purpose Two-Cycle Oil also exceeds the performance requirements of the API TC Service Classification which is commonly recommended for air-cooled two-cycle engines.
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
Product description
2-cycle air-cooled engine oil is designed to protect these components and protect against piston scuffing during start up and extended use conditions,It may be used in premix with gasoline or oil injection systems,2-cycle air-cooled oil is a highly fortified, high quality lubricant and should be used at the fuel to oil levels of original equipment oils,Protect against piston-scuffing,Keep performance-robbing carbon deposits from forming in the combustion chamber, piston tops and under crowns and piston-combustion rings
- 2-cycle air -cooled engine oil is designed to protect these components and protect against piston scuffing during start up and extended use conditions
- It may be used in premix with gasoline or oil injection systems
- 2-cycle air-cooled oil is a highly fortified, high quality lubricant and should be used at the fuel to oil levels of original equipment oils
- Protect against piston-scuffing
- Keep performance-robbing carbon deposits from forming in the combustion chamber, piston tops and under crowns and piston-combustion rings
User questions & answers
Question: | There are two versions of this oil. Can you verify that the labeling on each bottle in the case you are selling is exactly like the picture please |
Answer: | Dear Customer,Thank you for contact us.Power:Input: AC110-240V, 60-50Hz Output: DC15V, 1200mAIt has memory recorder, but the storage card is only 1G, If the memory is not enough, the previous record will be covered.But you can install a larger memory card.If you have further questions, please feel free to contact usBest Regards,Joy1byone Service Team |
Question: | Is this conventional, synthetic, or synthetic blend |
Answer: | Thank you for contact us, It's CMOS 600Tvls. If you have further questions, please feel free to contact us Best Regards, Joy 1byone Service Team |
Product description
Quaker State Universal 2-Cycle Engine Oil for Air-Cooled Engines is a premium formulation designed for hot-running, small, 2-cycle engines such as lawn mowers, chain saws, leaf blowers, string trimmers, edgers, motorcycles, and scooters. Suitable for use in either a "premix" or lubricant injection system, it provides a good protection against friction, burns cleanly, and helps keep ports clean for maximum output. It also protects ball and needle bearings during high RPM use.
- 2 cycle engine oil
Product description
Pennzoil Ultra Platinum Full Synthetic motor oil is made from natural gas, not crude. It is one of the best full synthetic motor oils in our portfolio. Made for extreme performance, Pennzoil Ultra Platinum outperforms conventional oils in terms of low temperature performance and volatility control. Our full synthetic motor oils are uniquely engineered from our revolutionary PurePlus Technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the high- quality base oil contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Ultra Platinum far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6), and is suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions. Pennzoil Ultra Platinum SAE 5W-20 Full Synthetic Motor Oil also offers the following benefits: Cleaner Pistons: Keeps pistons dramatically cleaner than required by industry standards (Based on ILSAC GF-6 and Sequence IIIH piston deposit test using SAE 5W-30 and Ford, Chrysler, GM and Ferrari specifications). Better Fuel Economy: With Pennzoil Ultra Platinum Full Synthetic motor oil, you can drive on average an extra 550 miles per year vs a dirty engine (Fuel economy measurements made using CAFE cycle under FTP75. Avg of 550 extra miles based on mixed city/highway miles vs dirty engine. Source fhwa. dot. gov, 2017. Follow OEM recommended oil drain intervals). Protects Horsepower: Pennzoil Ultra Platinum Full Synthetic motor oil helps protect against loss of power by helping to protect your engine against wear and deposit formation Unsurpassed Wear Protection: When it comes to protecting the internal parts of your engine from metal-on-metal contact, no other leading synthetic motor oil provides better wear protection from friction than Pennzoil Ultra Platinum Full Synthetic motor oil (Based on Sequence IVA wear test using SAE 5W-30). Excellent Temperature Performance: Provides faster low temperature oil flow in extreme cold environments (down to -40ºF) and protects against oil oxidation and degradation in extreme heat environments (up to +400ºF) like the combustion chamber and turbochargers (Temperature performance varies by viscosity grade). It meets or exceeds the following OEM requirements: FCA MS-6395; Ford WSS-M2C945-A; JLR STJLR. 03. 5004. It also exceeds the requirements of the following industry specifications: API SP and all previous categories; ILSAC GF-6; ACEA A1/B1. For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual.
- Full synthetic 5W-20 engine oil made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology
- No other leading motor oil provides better wear protection for your engine (Based on Sequence IVA wear test using SAE 5W-30)
- Helps protect engines from loss of power and provides better fuel economy—drive on average an extra 550 miles per year (versus a dirty engine)
- Keeps pistons dramatically cleaner than required by the toughest industry standards (Based on ILSAC GF-6 and Sequence IIIH piston deposit test using SAE 5W-30)
- Delivers unsurpassed sludge protection to help keep high-performance and luxury car engines as close as possible to factory clean (Based on Sequence VH Sludge Test using SAE 5W-20)
- Formulated to provide faster low-temperature oil flow and protection in extreme heat
- Single 5-quart bottle with ergonomic design for easy handling and pouring
User questions & answers
Question: | is this 0w20 dexos rated for gm |
Answer: | I have been using full synthetic oil in my 98 Silverado 5.7. I now have 364k miles with no engine issues at all. I'd recommend it for anything that takes 5w30 |
Question: | Is this product mixable with Pennzoil's older products of the same weight? I would hate to toss a few quarts of brand new Pennzoil Ultra I still have |
Answer: | SAE refers to the grading system. There are actually thicker Euro 5w-30 oils, but this is a thin 5w-30 for American and Asian cars. This particular blend is the latest additive formulation for GDI / turbo engines, it should be one of the best products on the market. |
Question: | Where do I apply this oil |
Answer: | "Approved - GMdexos1™ supersedes GM-LL-A-025, GM6094M and GM4718M" This is indicated on the 5W-30 Castrol Edge High Mileage data sheet, dated 09Nov15. On their latest data sheet dated 20Sep17, this approved statement is no longer indicated. 1 quart size or 5 quart size makes no difference. If the product was made after 20Sep17 then it is not likely to be approved for engines requiring dexos1. I would safely assume the bottle labeling will reflect whether or not using this as a suitable substitute over dexos1 type oil is acceptable. The picture is old and will, or should, be changed so their is no confusion. |
Question: | Can i use this on a Ferrari f |
Answer: | Castol says it meets the spec, and Ford SVT has approved Castrol 5W50 for use in the GT500. I use this oil in my 2013 GT500. |
Product features
Ultra Platinum Full Synthetic Motor Oil
Created for severe driving conditions, Pennzoil Ultra Platinum outperforms conventional oils in terms of low temperature performance and volatility control, and it's ideal for stop-and-go driving, frequent short trips, heavy loads, unpaved roads, and dusty conditions.
Providing unsurpassed wear protection from friction, Pennzoil Ultra Platinum delivers complete protection without compromise.
The Proof Is In The Pennzoil
Pennzoil is the first synthetic motor oil made from natural gas. Not crude.
Pennzoil Synthetic motor oil is created using a revolutionary gas-to-liquid process that converts natural gas into a base oil.
Unbeatable Engine Protection
All our innovation boils down to one thing: Pennzoil Synthetic motor oil gives you unbeatable engine protection.†
So whether you're racing at Daytona or just racing to get home, see what synthetic motor oil made from natural gas can do for your engine.
Cleaner Pistons
For maximum performance your engine needs to be clean of deposits. Pennzoil Ultra Platinum keeps pistons dramatically cleaner than required by the industry standard ILSAC GF-6.*
Better Fuel Economy
Pennzoil Ultra Platinum helps you drive on average an extra 550 miles per year vs a dirty engine.**
Horsepower Protection
Protects against loss of power by helping to protect your engine against wear and deposit formation.
Extreme Temperature Performance
Provides faster low temperature oil flow in extreme cold environments (down to -40ºF) and protects against oil oxidation and degradation in extreme heat environments (up to +400ºF).***
Product description
Pennzoil Platinum full synthetic SAE 5W-30 motor oil is made from natural gas, not crude oil. It is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high quality base oil contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 5W-30 motor oil is licensed and meets the vehicle requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Our Pennzoil Full Synthetic products are engineered for modern engines and offer the following benefits without compromise: Better Fuel Economy: With Pennzoil Platinum full synthetic motor oil, you can drive on average an extra 550 miles vs a dirty engine (Fuel economy measurements made using CAFE cycle under FTP75. Avg of 550 extra miles based on mixed city/highway miles vs dirty engine. Source fhwa. dot. gov, 2017. Follow OEM recommended oil drain intervals). Protects Horsepower: Pennzoil Platinum Full Synthetic motor oil helps protect against loss of power by helping to protect your engine against wear and deposit formation. Unsurpassed Wear Protection: When it comes to protecting the internal parts of your engine from metal-on-metal contact, no other leading synthetic motor oil provides better wear protection from friction than Pennzoil Platinum Full Synthetic motor oil (Based on Sequence IVA wear test using SAE 5W-30). Excellent Temperature Performance: Provides faster low temperature oil flow and protects in extreme heat. Cleaner Pistons: Offers outstanding piston cleanliness by capturing dirt and contaminants and keeping pistons up to 45% cleaner than required by the toughest industry standards (Based on Sequence IIIH results). It meets or exceeds the following OEM requirements: FCA MS-6395, Chrysler MS-13340; Ford WSS-M2C946-B1; GM dexos1 Gen 2; HONDA/ACURA HTO-06; Volvo. It also exceeds the requirements of the following industry specifications: API SP and all previous categories; ILSAC GF-6; ACEA A1/B1. For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual.
- Full synthetic 5W-30 engine oil made from made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology
- Provides better fuel economy—drive on average an extra 550 miles per year (versus a dirty engine)
- Pennzoil Platinum 5W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
- No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
- Formulated to provide faster low-temperature oil flow and protection in extreme heat
- Helps protect engines from loss of power
- Single 5-quart bottle with ergonomic design for easy handling and pouring
User questions & answers
Question: | It says it ships in 1 to 2 months. This can't be right is it |
Answer: | It's the whole thing |
Question: | I drive only 2500 miles (severe driving) per year. Is 1.5 years (3750miles) OCI ok using PP or should I go by 1/2 year time interval |
Answer: | Thank you for your inquiry. The Dr. Brown's Sippy Straw Bottle with Silicone Handles, Blue, 8 oz has a soft spout. |
Question: | anyone know if this is the oil specified for the RAM (or jeep) ecodiesel |
Answer: | Thank you for your inquiry. The Dr. Brown's Sippy Straw Bottle with Silicone Handles, Green, 8 oz does not have a valve or vent. The bottom of the straw contours to the bottom of the bottle to allow ease with tilt and sip. |
Question: | Is this good oil for a 2015 Nissan XTERRA |
Answer: | Thank you for your inquiry. The Dr. Brown's Sippy Straw Bottle with Silicone Handles, Green, 8 oz is made of BPA free polypropylene plastic. |
Question: | Is this price per bottle ? I don't see where it says a quantity |
Answer: | Thank you for your inquiry. The Dr. Brown's Sippy Straw Bottle with Silicone Handles, Green, 8 oz is not compatible with the 4 oz. bottle. |
Product features
Platinum Full Synthetic Motor Oil
Made for extreme performance, Pennzoil Platinum offers excellent performance in extreme temperatures—delivering faster low temperature oil flow and protecting in extreme heat.
Providing unsurpassed wear protection from friction, Pennzoil Platinum delivers complete protection without compromise.
The Proof Is In The Pennzoil
Pennzoil is the first synthetic motor oil made from natural gas. Not crude.
Pennzoil Synthetic motor oil is created using a revolutionary gas-to-liquid process that converts natural gas into a base oil.
Unbeatable Engine Protection
All our innovation boils down to one thing: Pennzoil Synthetic motor oil gives you unbeatable engine protection.†
So whether you're racing at Daytona or just racing to get home, see what synthetic motor oil made from natural gas can do for your engine.
Cleaner Pistons
For maximum performance your engine needs to be clean of deposits. Pennzoil Platinum keeps pistons cleaner than required by the industry standard ILSAC GF-6.*
Better Fuel Economy
Pennzoil Platinum helps you drive on average an extra 550 miles per year vs a dirty engine.**
Horsepower Protection
Pennzoil Platinum protects against loss of power by helping to protect your engine against wear and deposit formation.
Extreme Temperature Performance
Flowing faster in extreme cold temperatures, Pennzoil Platinum motor oil travels quickly to lubricate the various engine parts. When exposed to extreme hot temperatures, Pennzoil Platinum has a lower tendency to evaporate.***
Product description
Pennzoil Platinum Euro L 5W-30 motor oil with PurePlus Technology is a full synthetic oil designed with peak performance in mind. This engine oil’s superior cleaning ability helps attack deposits to keep vital engine parts clean. PurePlus Technology is the gas-to-liquid process, which converts natural gas into a high quality full synthetic oil base. From that pure base oil, we add high-performance additives to create Pennzoil Platinum Euro, a full synthetic motor oil designed for complete protection without compromise. This European engine oil exceeds manufacturer requirements for cleanliness and protection.
NOTHING KEEPS YOUR ENGINE CLOSER TO FACTORY CLEAN
BETTER FUEL ECONOMY
PROTECTS HORSEPOWER
Helps protect engines from loss of power
SUPERIOR WEAR PROTECTION
Helps to extend engine life by protecting surfaces from wear and by helping to neutralize corrosive combustion acids
EXCELLENT PERFORMANCE IN EXTREME TEMPERATURES
Provides faster low temperature oil flow and protects in extreme heat
Specifications
- BMW LL-01
- MB-Approval 229.3, MB-Approval 229.5, MB Approval 226.5
- VW 502.00, VW 505.00
Exceeds the requirements for
- API SL/CF and all previous categories (meets API SN req)
- ACEA A3/B3-10, A3/B4-10
Pennzoil Platinum Euro L 5W-30 Oil can be used in both passenger car gasoline and light duty diesel applications. It is an oil for European cars and approved for BMW, VW, and Mercedes-Benz applications. For more information, refer to the technical spec sheet or your vehicle’s manual for the proper viscosity grade.
Consult and follow your owner’s manual
Based on Sequence VG and M-111 sludge test using SAE 0W-40
Meets the requirements of MB 229.5 which includes Fuel Economy Improvement (FEI) requirement as determined in industry standard gasoline engines
Compared to API SN specification and based on Sequence IVA and Sequence VIII engine tests carried out in an independent laboratory
- Nothing keeps your engine closer to factory clean
- Better fuel economy
- Protects horsepower
- Superior wear and corrosion protection
- Excellent performance in extreme temperatures
User questions & answers
Question: | I have a directly injected turbo gasoline engine (not diesel). Is it ok to use this oil |
Answer: | Size 1 |
Question: | does this meet the VW 507 standard |
Answer: | Haven’t had this issue. It’s pretty durable. |
Question: | Why does this listing show bmw ll-01 for euro l, when pennzoil's website says euro l is ll |
Answer: | Our baby held his own bottle too! This just made it easier for him. Personally I love this handle and ordered a second one for his snippy cup. |
Question: | The oil in the picture is not Euro L oil. Is the pic wrong or is the description wrong |
Answer: | Yes. It's a silicone handle that You can remove and place on other 8 ounce bottles. |
Product features
Platinum Euro Full Synthetic Motor Oil
Specially formulated to clean and protect European vehicles including Mercedes-Benz, VW, Fiat, Porsche, Ferrari, and Maserati, Pennzoil Platinum Euro offers excellent performance in extreme temperatures—delivering faster low temperature oil flow and protecting in extreme heat.
Providing unsurpassed wear protection from friction, Pennzoil Platinum Euro delivers complete protection without compromise.
The Proof Is In The Pennzoil
Pennzoil is the first synthetic motor oil made from natural gas. Not crude.
Pennzoil Synthetic motor oil is created using a revolutionary gas-to-liquid process that converts natural gas into a base oil.
Unbeatable Engine Protection
All our innovation boils down to one thing: Pennzoil Synthetic motor oil gives you unbeatable engine protection.†
So whether you're racing at Daytona or just racing to get home, see what synthetic motor oil made from natural gas can do for your engine.
Cleaner Pistons
For maximum performance your engine needs to be clean of deposits. Pennzoil Platinum Euro keeps your engine closer to factory clean.*
Better Fuel Economy
Pennzoil Ultra Platinum helps you drive on average an extra 550 miles per year vs a dirty engine.**
Horsepower Protection
Pennzoil Platinum Euro protects against loss of power by helping to protect your engine against wear and deposit formation.
Extreme Temperature Performance
Flowing faster in extreme cold temperatures, Pennzoil Platinum Euro motor oil travels quickly to lubricate the various engine parts. When exposed to extreme hot temperatures, Platinum Euro has a lower tendency to evaporate.***
Product description
Pennzoil Full Synthetic was engineered from the ground up with tougher, more durable ingredients than those found in conventional petroleum-based motor oils. This means outstanding results when measured against the most rigid of industry standards providing the best possible protection for your engine no matter any temperature or condition.
- Full synthetic 10W-30 engine oil made from made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology
- Provides better fuel economy—drive on average an extra 550 miles per year (versus a dirty engine)
- Pennzoil Platinum 10W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
- No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
- Formulated to provide faster low-temperature oil flow and protection in extreme heat
- Helps protect engines from loss of power
- Single 1-quart bottle
User questions & answers
Question: | does this work for yamaha scooters like 50cc zuma |
Answer: | Yes you can. I was able to. |
Question: | For generator use ok |
Answer: | These are made in China |
Question: | Se puede usar en motor kohler comando pro -ecv |
Answer: | Blue or green, not clear. |
Question: | Is it great for lawn mowers |
Answer: | Size 1 |
Product features
Platinum Full Synthetic Motor Oil
Made for extreme performance, Pennzoil Platinum offers excellent performance in extreme temperatures—delivering faster low temperature oil flow and protecting in extreme heat.
Providing unsurpassed wear protection from friction, Pennzoil Platinum delivers complete protection without compromise.
The Proof Is In The Pennzoil
Pennzoil is the first synthetic motor oil made from natural gas. Not crude.
Pennzoil Synthetic motor oil is created using a revolutionary gas-to-liquid process that converts natural gas into a base oil.
Unbeatable Engine Protection
All our innovation boils down to one thing: Pennzoil Synthetic motor oil gives you unbeatable engine protection.†
So whether you're racing at Daytona or just racing to get home, see what synthetic motor oil made from natural gas can do for your engine.
Cleaner Pistons
For maximum performance your engine needs to be clean of deposits. Pennzoil Platinum keeps pistons cleaner than required by the industry standard ILSAC GF-6.*
Better Fuel Economy
Pennzoil Platinum helps you drive on average an extra 550 miles per year vs a dirty engine.**
Horsepower Protection
Pennzoil Platinum protects against loss of power by helping to protect your engine against wear and deposit formation.
Extreme Temperature Performance
Flowing faster in extreme cold temperatures, Pennzoil Platinum motor oil travels quickly to lubricate the various engine parts. When exposed to extreme hot temperatures, Pennzoil Platinum has a lower tendency to evaporate.***
Product description
Pennzoil High Mileage 10W-30 motor oil is a passenger car engine oil that has been enhanced with a unique combination of conditioning agents and additives to help stop seal leaks and reduce oil consumption in worn engines. Pennzoil High Mileage engine oil cleans out up to 30% of engine sludge in the first oil change and is specifically designed for new or older model vehicles with 75,000 miles or more, to help keep the engines running clean and going strong. If the vehicle is 5-7 years old, check theodometer to see if a high mileage oil is required.
This 10W-30 high mileage motor oil is trusted by leading car manufactures for engine protection. Pennzoil is America’s most trusted motor oil brand . Plus, Pennzoil High Mileage Vehicle motoroil is backed by the Pennzoil Lubrication Limited Warranty.
Pennzoil High Mileage 10W-30 engine oil exceeds the requirements of API SN and all previous categories. Specifications may vary by viscosity grade. These specifications are to be used asguidelines only. For more information, refer to the technical specification sheet or to your individual vehicle owner’s manual for the proper viscosity grade and specifications.
Based on severe sludge clean-up test using SAE 5W-30
Based on NPD’s Car Care Track, Jan ’16 –Dec ’16
- Conventional High Mileage 10W-30 engine oil specially formulated for new or late model SUVs, light vans and trucks, and passenger cars
- Recommended for vehicles with over 75,000 miles
- Helps prevent sludge and other damaging deposits
- Contains seal conditioning agents for dry or cracked engine seals to help reduce leaks and oil consumption
- Provides proven wear protection for engine parts
- Case of six 1-quart bottles
- Exceeds the requirements of the following industry specifications: API SP and all previous categories
User questions & answers
Question: | Has anyone had any issues with leaking bottles |
Answer: | Any of the options dr brown bottles will work without the vent the older style dr brown ones has to have vent but they have the options ones that grow with them so u can take out vent and still use bottles if you look at store for the options dr brown and see the top it’s different design shaped then the original dr browns and you can most likely use the bottles u already have as well too hope this helps cause I learned wit mine about this and I didn’t have to get these ones til I was ready to go to soppy spout but these are also a cheaper way to get them too cause their a lot cheaper at 4.99 then just one options or regular dr brown bottles they run from $7-$10 for a bottle and these r great price and can use both regular nipples and keep the spout ones for when u need them and they also have these ina. 2pk so it’s 8.99 for 2 of these which is great deal for dr brown hope this helps |
Latest Reviews
View all
Wrist Brace For Sleeping Both Hand
- Updated: 01.01.2023
- Read reviews

Melissa Doug Bunny Toys
- Updated: 31.03.2023
- Read reviews

Stickany Macbook Stickers
- Updated: 22.06.2023
- Read reviews

Bubble Wrap For Moving Dishes
- Updated: 19.03.2023
- Read reviews

Aims Inverters
- Updated: 07.03.2023
- Read reviews