14 best lucas oil engine additives
Lucas Oil engine additives are products designed to enhance and optimize the performance and longevity of automotive engines. These additives are formulated to be mixed with motor oils and other fluids used in vehicles. Lucas Oil, the manufacturer, is known for producing a variety of automotive lubricants and additives.
These engine additives typically serve multiple purposes, including improving engine performance, reducing friction and wear, cleaning and preventing deposits, and enhancing fuel efficiency. Some additives may target specific issues, such as reducing noise, preventing corrosion, or extending the life of the engine.
Users often add Lucas Oil engine additives to their motor oil during regular oil changes or maintenance intervals. The additives are mixed with the engine oil and circulate through the engine, providing the intended benefits. It's important to follow the manufacturer's instructions regarding the proper usage and dosage of these additives to achieve optimal results.
Lucas Oil is a reputable brand known for its wide range of automotive lubricants and additives, and their engine additives are generally regarded as effective in improving engine performance and prolonging engine life.
In summary, Lucas Oil engine additives are products designed to enhance engine performance, reduce friction and wear, clean and prevent deposits, and improve fuel efficiency when added to motor oils. These additives are mixed with the engine oil during regular maintenance to optimize the engine's performance and longevity. Lucas Oil is a well-known manufacturer of these additives and is trusted for their automotive lubricants and additives.
Below you can find our editor's choice of the best lucas oil engine additives on the marketProduct description
Lucas Engine Break-In Oil Additive protects camshaft lifters and valve train during break-in periods of motors. It is excellent for flat tappet camshafts during break-in or as an additive to any motor oil to prevent premature wear.
- Affordable Solutions
- Not designed for passenger car use
- Exclusive blend of extreme pressure additives
- Excellent for flat tappet camshafts or as an additive
User questions & answers
Question: | How many quarts does this treat |
Answer: | I used two bottles when breaking in a marine engine with 8 qts capacity. |
Question: | What are the zinc and phosphorus concentration rates? Are there any dilution charts |
Answer: | Lucas Product# 10063 is a zinc additive for engine oil. Its designed for engines with no catalytic converter in the exhaust (pre-1977 cars/trucks) and race engines. This product is also used as an engine "break-in" additive for newly built engines. For non-race applications, one bottle will usually treat two oil changes. Some race-engine applications require the entire bottle. Classic cars (depending on oil capacity) require approximately 2,100 PPM (Parts Per Million) zinc in the oil. Phosphorus levels are not published for this product. Coupon Available. Voted Top in service, warranty and support. Thank you for your interest. FamilyGoKarts 800-950-2210 |
Question: | How much do you add |
Answer: | 16 ounce bottle each oil change to protect your engine. However much engine oil you normally add during and oil change, make sure you substract 16 ounces. Then add TB Zinc Plus. |
Question: | how man oz should i use per quart |
Answer: | 1 bottle with standard crank case capacity (4-6) quarts. Pour in bottle first, then add oil to full mark. |
Product description
Lucas Engine Oil Stop Leak is an all new formulation of Lucas additives and very specific base stocks designed to stop seal leaks in engines. Compatible with petroleum, semi-synthetic and full synthetic motor oils.
- Compatible with petroleum, semi-synthetic and full synthetic motor oils
- Renews worn seals with no risk of damage or eventual corrosion
- Reduces engine noise and oil consumption, while raising oil pressure
- Contains no harmful solvents
User questions & answers
Question: | I have a 4.3 liter volvo penta i/o boat engine that has a small leak. i use 20w-40 oil. can i use this in a boat engine runs up to 4500 rpms |
Answer: | you of course can use it, but will it fix your leak no, it will slow it down but will not stop it. lucas oil products are nothing more than super thick oil kinda of like pouring very thick gear oil into your engine. you are using a very thin oil, i would think because of high rpms & heat your oil needs to move fast & freely to keep all parts lubed. talk to a penta dealer but i'm guessing they will tell to fix the leak correctly with a new gasket or replacement part to cure the leak |
Question: | Can i use both this and the lucas oil stabilizer at the same time |
Answer: | I pulled this info from the vendor.Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum, it can safely blend with all other automotive lubricants, even synthetics, ATF and mineral oil. It keeps old engines alive and new engines new. |
Question: | questions: Does this need to be added every oil change like other products? Is it really thick like Motor Honey? Thanks |
Answer: | No, you don't need to replace it on every oil change. This additive mixes with your motor oil and coats the inside of the engine as well as the seals (where usually the leaks comes from). As I've mentioned before don't overfill this two mixture (your motor oil & Lucas Stop Leak) beyond your engine's capacity. Once you've drained your old oil and replaced the drain plug & new oil filter on your vehicle carefully add the Stop Leak then the additional motor oil, checking on the dip stick every now and then while adding them, so as not you won't overfill the engine.'Motor Honey', I haven't come across this product. Is this just a figure of speech? |
Question: | how do I use lucas oil stop leak |
Answer: | When you change your oil put the stop leak Quart in in place of 1 of the Quarts of oil,then drive regular till next oil change.Unless your leak is extreme Lucas will stop the leak. I've used all the Lucas products for years in my cars and my 18 wheeler before i retired. Now i still use it in my personal vehicles. Love that Lucas! |
Product description
Lucas Oil Hot Rod and Classic motor oil is manufactured with the quality paraffinic base oil and fortified with a additive package containing of zinc, molybdenum and phosphorus, which provides a tougher, thicker additive film for protection even under the most severe conditions. It lowers oil temperatures, extends oil life and minimises metal fatigue. It improves the film strength between the cylinder wall and piston rings, slows oil burning and improves pressure in worn engines. It has good cold temperature properties and stands up to high operating temperatures. It is compatible with methanol and all racing fuels, as well as with synthetic and non-synthetic oils.
- Lowers oil temperature
- Minimizes metal fatigue
- Improves pressure in worn engines
- Contains the high levels of zinc necessary to protect flat tappet cams, lifters and pushrods
User questions & answers
Question: | Be good for a 1988 305 chevy motor |
Answer: | Not sure what SAPS is |
Question: | can it be use on 67 mustang |
Answer: | If you have a turbocharger you should definitely use Lucas. |
Question: | Whats the difference in this thats 32.00 and the 5 single quart bottles thats |
Answer: | Had start up noise on my 2013 Hyundai Santa GLS, dealer says it's nothing but engine fuel pump, GDI on top of valve cover (@500.00) making noise , common on GDI systems after I asked @. 90000 I am still running 5W-20 full synthetic mobile 1 . changed oil /filter put in quart of this guess what...be 5500 + miles and still no noise ....saved me from changing that part...and even when I have to stomp down on still no noise...:) : ) |
Question: | Can i use this engine oil on my 1997 gmc suburban?and would it help quite the lifter ticking |
Answer: | No, use fuel treatment solution solely |
Product description
Browse our exclusive collection of auto accessories that includes top quality products to enhance the style, comfort and functionality of your vehicle. We provide one stop shop for the perfect auto accessories for the vehicle.
- Virtually Eliminates Dry Starts And Excessive Wear
- Extends Oil And Engine Life
- Stabilizes Oil Pressure And Lowers Oil Temperature
- Eliminates Hesitation, Rough Idle, Stalling, And Poor Fuel Economy
User questions & answers
Question: | Is Lucas Oil 10131 Pure Synthetic Oil Stabilizer Low SAPS |
Answer: | 1 quart Lucas 4 quarts oil |
Question: | Can Lucas 10131 be used with turbocharger? (4 cyl Saab |
Answer: | it works with any automotive lubricants. |
Question: | does using lucas oil pure synthetic oil stabilizer help with any start up rattle noise and or any knocking noise |
Answer: | The mfr. States that it blends well with most oils,however, I believe the oils formulated for those type out drives are formulated to have a low affinity for water contamination. That is to say your oil could foam up from simple condensation in the gearbox while using the Lucas where it would likely not foam with the merc oil. |
Question: | Can you use this as a fuel treatment too |
Answer: | Its a 100% petroleum product. |
Product description
Lucas Racing Break-In Oils help seal new rings while providing excellent extreme pressure properties that protect the entire valve train and of course, the camshaft. Especially designed for flat tappet camshafts, but can be used wherever you need the extra wear protection in the form of zinc. Formulated in three grades to cover all motors and applications
Recommended for use on initial break-in of both flat tappet and roller camshaft applications for maximum protection and performance. Excellent on track performance prior to switching engine over to the racing only line conventional or synthetic. Compatible with Ethanol, Methanol and high octane race gas.
Zinc levels typically at 3600 PPMS, which is much higher than commercial passenger car oils. Recommended for use in racing applications only. Not recommended for passenger cars requiring API service oil.
- Quicker more efficient ring seal
- Higher levels of zinc and phosphorus maximum protection
- A must use for flat tappet camshaft break-in
- Less blow-by equates more power and better ring seal
- Requires no moly supplement and no additional additives
User questions & answers
Question: | To everyone who has used this oil did yoh buy the sae 30w or the 20/50 breakin oil |
Answer: | I ordered SAE 30 and received 20w-50 |
Question: | is this non-detergent oil ? better for seating piston rings |
Answer: | Yes... this is a high-zinc break-in oil. Used for helping to seat the rings on an old school, flat-tappet engine. If you're running a full roller lifter set up, this may be a bit of preventative overkill, but it's cheap insurance. I run it for 500 miles then change to a oil designed for older hot rods (i.e.: contains zinc). Lucas also makes an excellent "Hot Rod & Classic" oil in 10w30 and 10w40 once you've broken things in. Note that these oils are NOT for modern engines and/or cars with catalytic-equipped emissions controls. |
Question: | How long do you run this oil |
Answer: | Called Lucus oil, they said for my Jeep L 4, at first start keep the RPMs up at med high for 5 minutes and don’t let up. Then run Jeep normally for 800 miles then change oil . |
Question: | Will this work for a Diesel engine |
Answer: | 40w is more common for diesel engines. |
Product description
Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures.
- Formulated To Eliminate Dry Starts And Reduce Friction, Heat And Wear In Any Type Of Engine
- It Allows Motor Oils A Higher Degree Of Lubricity Which Reduces Oil Consumption And Operating Temperatures
- Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories
User questions & answers
Question: | How much of the gallon do you use in a 15 quart Diesel engine when you change the oil and filter |
Answer: | 4 quarts in a gallon.. You are using 15 quarts which is about 3.75 gal. of diesel oil. On the bottle it says put in 20% or 1 qt stabilizer for 4 quarts of motor oil (total = 5 quarts).. So, about 4 quarts stabilizer or 1 gal. for your big diesel sir.. I'd substitute a gal. of stabilizer for 1 gal of diesel oil.. Remember to substitute the gal (2.75 gal. of diesel oil) and add one gal. of stabilizer = 3.75gal. |
Question: | how much do I put in at my next oil change? I have a toyota 4runner 5quarts. Thanks |
Answer: | 1Quart...Remember, it's 20% of your engine oil capacity.... |
Question: | This product can be used in diesel engines |
Answer: | Yes this product can be used for Diesel engines . It can used for either motor oil or transmission oil |
Question: | Is this for a 1 Gallon Bottle OR 4 Quart sized Bottles? Description says 4 per case |
Answer: | I am not finding where it says "4 per case" but the image is the 1 gallon and I order 1 and received a single 1 gallon container. |
Product description
Lucas Fuel treatment complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road, locomotive and marine diesel equipment engines. A powerful blend of oils and additives that contain no solvents. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. Formulated for both gasoline and diesel engines, carbureted and fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.
- The product is 5, 25 ounces, fuel treatment, for gasoline LPG and diesel fuel, contains no alcohol/solvents/kerosene/diesel fuel, lubricates rings and cylinder walls for longer life, increases mileage, cleans and lubricates valves, pumps, carburetors, and injectors
- Easy and simple use kit
- The product is manufactured in China
- A great tune-up in a bottle
- Cleans and lubricates the fuel system
- Neutralizes low sulfur fuel problems
- Increases power and miles per gallon by burning excess exhaust emissions
- Increases the life of pumps and injectors
User questions & answers
Question: | How often can you use |
Answer: | I use this on every fill up because it lubricates the upper cylinder which increases my gas mileage by about 9%. So it definitely pays for itself. Tho I buy it a gallon at a time and use the smaller bottle to pour into my gas tank. Also, I only put about 7 or 8oz in a 20 gallon tank. Too much of this stuff actually lowers gas mileage. I know from personal experience. If you're looking for a one-per-year cleaner, you really need to look at Techron. This Lucas Oil fuel treatment isn't a strong enough cleaner to use only once per year. I use Techron every other oil change to keep injectors and whatnot clean, but use this Lucas Oil treatment for MPG gains only (from lubricant affects). |
Question: | Can i Use this in a Toyota corolla 2006? and how often should I use it |
Answer: | My Toyota dealer sells this product in their service dept |
Question: | Can I use this in my 2012 kia sorento |
Answer: | You have to add this before you fill your vehicle up. That way the very action of the pump pumping gas into your vehicle mixes up the Lucas Oil. You don't want to put it in after you filled your gas tank |
Question: | Will it help remove P0420 code |
Answer: | 2 bottles of Lucas oil, one gas refill apart, helped with my P0420 Code on Infiniti QX60 engine light. With the 2nd bottle, the light was gone. It worked like a charm. I will continue to keep the fuel tank clean moving forward. Tip : don't wait for the fuel tank to be completely empty before you refill. |
Product description
Lucas Engine Oil Stop Leak is an all new formulation of Lucas additives and very specific base stocks designed to stop seal leaks in engines.
- Compatible with petroleum, semi-synthetic and full synthetic motor oils
- Renews worn seals with no risk of damage or eventual corrosion
- Reduces engine noise and oil consumption, while raising oil pressure
- Contains no harmful solvents
User questions & answers
Question: | It's ok for diesel semi truck |
Answer: | If a customer asks for this service to be done. |
Question: | Will this product freeze if left in an engine that's just sitting in freezing weather for several weeks |
Answer: | The date on the bottom of the can is the production date, not the expiration date |
Question: | Hello how liters of engine will this treat? I have about 36 liters in my truck |
Answer: | There is no way of telling if your vehicle engine has sludge unless you take it apart completely. The best way is to use a professional grade oil cleaner such BG EPR. I've seen engines that had an oil change every 3000 miles and after adding the BG EPR; the oil turned black. |
Question: | Does this seal oil filter gasket leaks if left slightly loose |
Answer: | Yes. Absolutely. My BG rep. states and I quote"if you really wanted to you could use it every oil change beginning at 5,000 miles. I only really recommend it every 15,000 though in my experience |
Product description
Lucas Oil 10016 Fuel System Cleaner; Use To Clean/ Lubricates And Fuel Stabilizer For Entire Fuel System And Integral Engine Parts; 16 Ounce Can
- 6 PACK
- Compatibility: Clean/ Lubricates And Fuel Stabilizer For Entire Fuel System And Integral Engine Parts
- Unit Size: 16 Ounce
- Contains Special Lucas Additives That Cause The Fuel To Burn Thoroughly For Fewer Exhaust Emissions And More Miles Per Gallon
- Removes Harmful Deposits On Intake Valves And Cylinder Heads
User questions & answers
Question: | Is this listing correct as a 12 pack of 16 oz bottles for a total of 192 fluid ounces |
Answer: | No, this is to treat ethanol-based fuel for storage. I recommend you find a gas station that has a premium with no ethanol. |
Question: | Should i use this in a new car that i bought in sept 2020 and has 2k miles on it |
Answer: | Yes, you receive 4 one gallon jugs for this price. |
Question: | Would this fix a low egr flow check engine light |
Answer: | Conventional non-synthetic oils for an ‘88 305 would be just as good. The Lucas oil is for my 50-year-old cars and is more expensive. |
Question: | I have a 6.4 liter power stroke. Does this stuff really work? And what exactly does it do? Is it like the sea foam |
Answer: | this would be a great oil for 1967 289 motor. |
Product description
A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion.
Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.
Lucas Fuel Treatment complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road, locomotive and marine diesel equipment engines.
- A great tune-up in a bottle
- Cleans and lubricates the fuel system
- Neutralizes low sulfur fuel problems
- Increases power and miles per gallon by burning excess exhaust emissions
- Increases the life of pumps and injectors
User questions & answers
Question: | Es recomendable para acura mdx |
Answer: | I was told one bottle per tank for my Lincoln Town Car 2007 |
Question: | Does this help Moisture be absorbed into the fuel |
Answer: | It can be used in any motor gas or diesel |
Question: | can I put this product 10020 in my outboard motor |
Answer: | My guess is that you are referring to ABV and that stands for Alcohol by Volume which is the percentage of alcohol in the finished beer. |
Question: | Does it increase Octane points |
Answer: | No, but we do carry one gallon ingredient kits from Brewer's Best. |
Product description
Lucas engine oil Stop leak is an All new formulation of Lucas additives and very specific base stocks designed to Stop seal leaks in engines
- Product Type: Auto Oil
- Package Dimensions: 8.89 L X 10.16 W X 30.48 H (Centimeters)
- Package Weight: 0.953 Kilograms
- Country Of Origin: United States
User questions & answers
Question: | My 15K generac has a slow oil leak. How much product should I add to it |
Answer: | You should use 20% of engines oil capacity |
Question: | Can I use it on a gasoline engine |
Answer: | yes |
Question: | How much Lucas oil stop engine can I put in to the engine |
Answer: | According to the label you put 20% of your engine capacity. (1 quart of Lucas oil to 4 quarts of engine oil). |
Question: | I have a leak where my tranny meets my engine I believe it’s a “lower rear seal leak “ ? Will this be effective for that type of leak |
Answer: | Depends on how damaged the seal is but this does work very effectively in most cases |
Product description
Lucas Engine Oil Stop Leak is an all new formulation of Lucas additives and very specific base stocks designed to stop seal leaks in engines.
- Compatible with petroleum, semi-synthetic and full synthetic motor oils
- Package Dimensions: 31.496 H x 32.257 L x 33.02 W (centimetres)
- Package Weight: 33.85 pounds
- Country of Origin : United States
Product description
Protects camshaft lifters and valve train during break-in period of motor. Excellent for flat tappet camshafts during break-in or as an additive to any motor oil to prevent premature wear. Exclusive blend of extreme pressure additives.
- Features an exclusive blend of extreme pressure additives
- Add one bottle with every oil change to increase the zinc content of your motor oil
- Specially designed for race applications requiring additional extreme pressure additives
- Dyno testing shows a more efficient break-in when used resulting in less engine run time prior to race day
- Formulated to work excellent with flat tappet camshafts during break-in or as an additive to any motor oil to prevent premature wear.
Product description
Lucas High Performance Semi-Synthetic 2 CYCLE Oil has been specifically developed to give a long trouble-free life to gasoline-powered 2-cycle engines. Designed for any oil injection system or pre mix up to 50:1. Use in snowmobiles, weed eaters, leaf blowers, chain saws and more. Lucas High Performance Semi-Synthetic 2 Cycle Racing Oil uses an advanced "Smokeless" formula specially blended from mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors. It also contains exclusive detergents and lubricants. The end result of this advanced technology is a more thorough burning of the fuel resulting in more power and fewer emissions. Lucas ash less detergent inhibitor package minimizes spark plug fouling, pre-ignition, ring sticking and combustion chamber deposits. The user can expect cleaner exhaust ports and spark plugs, less carbon buildup on the piston rings, skirts, crown and under crown areas.
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
User questions & answers
Question: | Can it be used for an outboard boat engine |
Answer: | Yes this is ok for diesel trucks. Coupon Code is Available. Thank you for the question. FamilyGoKarts 320-695-2899 |
Question: | How about 1992 yamaha superjet 650 it doesn't say pc-w3 anywhere |
Answer: | Why would it freeze? It’s an additive, it only replaces 20% of your oil. |
Question: | can this be used with an echo weed eater and leaf blower |
Answer: | ! Qt per 4 qts of oil. |
Question: | Does this stay suspended in high ethanol fuels like E |
Answer: | Your oil filter should NEVER |
Latest Reviews
View all
Cla Supplement For Weight Losses
- Updated: 03.06.2023
- Read reviews

Hair For Crochet Braids
- Updated: 07.07.2023
- Read reviews

Valken Shooting Goggles
- Updated: 31.05.2023
- Read reviews

Tiger Liter Boxes
- Updated: 26.06.2023
- Read reviews

Bastex Phone Cases
- Updated: 17.07.2023
- Read reviews