12 best lucas oil additives
Lucas AI Innovations LUC Heavy Duty Oil Stabilizer 1 Gallon
Lucas Oil
Product description
Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures.
- Formulated To Eliminate Dry Starts And Reduce Friction, Heat And Wear In Any Type Of Engine
- It Allows Motor Oils A Higher Degree Of Lubricity Which Reduces Oil Consumption And Operating Temperatures
- Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories
User questions & answers
| Question: | How much of the gallon do you use in a 15 quart Diesel engine when you change the oil and filter |
| Answer: | 4 quarts in a gallon.. You are using 15 quarts which is about 3.75 gal. of diesel oil. On the bottle it says put in 20% or 1 qt stabilizer for 4 quarts of motor oil (total = 5 quarts).. So, about 4 quarts stabilizer or 1 gal. for your big diesel sir.. I'd substitute a gal. of stabilizer for 1 gal of diesel oil.. Remember to substitute the gal (2.75 gal. of diesel oil) and add one gal. of stabilizer = 3.75gal. |
| Question: | how much do I put in at my next oil change? I have a toyota 4runner 5quarts. Thanks |
| Answer: | 1Quart...Remember, it's 20% of your engine oil capacity.... |
| Question: | This product can be used in diesel engines |
| Answer: | Yes this product can be used for Diesel engines . It can used for either motor oil or transmission oil |
| Question: | Is this for a 1 Gallon Bottle OR 4 Quart sized Bottles? Description says 4 per case |
| Answer: | I am not finding where it says "4 per case" but the image is the 1 gallon and I order 1 and received a single 1 gallon container. |
Lucas Oil 10278 Engine Oil Stop Leak, 1 Quart
Lucas Oil
Product description
Lucas Engine Oil Stop Leak is an all new formulation of Lucas additives and very specific base stocks designed to stop seal leaks in engines. Compatible with petroleum, semi-synthetic and full synthetic motor oils.
- Compatible with petroleum, semi-synthetic and full synthetic motor oils
- Renews worn seals with no risk of damage or eventual corrosion
- Reduces engine noise and oil consumption, while raising oil pressure
- Contains no harmful solvents
User questions & answers
| Question: | I have a 4.3 liter volvo penta i/o boat engine that has a small leak. i use 20w-40 oil. can i use this in a boat engine runs up to 4500 rpms |
| Answer: | you of course can use it, but will it fix your leak no, it will slow it down but will not stop it. lucas oil products are nothing more than super thick oil kinda of like pouring very thick gear oil into your engine. you are using a very thin oil, i would think because of high rpms & heat your oil needs to move fast & freely to keep all parts lubed. talk to a penta dealer but i'm guessing they will tell to fix the leak correctly with a new gasket or replacement part to cure the leak |
| Question: | Can i use both this and the lucas oil stabilizer at the same time |
| Answer: | I pulled this info from the vendor.Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum, it can safely blend with all other automotive lubricants, even synthetics, ATF and mineral oil. It keeps old engines alive and new engines new. |
| Question: | questions: Does this need to be added every oil change like other products? Is it really thick like Motor Honey? Thanks |
| Answer: | No, you don't need to replace it on every oil change. This additive mixes with your motor oil and coats the inside of the engine as well as the seals (where usually the leaks comes from). As I've mentioned before don't overfill this two mixture (your motor oil & Lucas Stop Leak) beyond your engine's capacity. Once you've drained your old oil and replaced the drain plug & new oil filter on your vehicle carefully add the Stop Leak then the additional motor oil, checking on the dip stick every now and then while adding them, so as not you won't overfill the engine.'Motor Honey', I haven't come across this product. Is this just a figure of speech? |
| Question: | how do I use lucas oil stop leak |
| Answer: | When you change your oil put the stop leak Quart in in place of 1 of the Quarts of oil,then drive regular till next oil change.Unless your leak is extreme Lucas will stop the leak. I've used all the Lucas products for years in my cars and my 18 wheeler before i retired. Now i still use it in my personal vehicles. Love that Lucas! |
Lucas Oil 10063 Engine Break in Oil Additive - TB Zinc Plus, 16 Ounce, Multi-Colored (LUC10063)
Lucas Oil
Product description
Lucas Engine Break-In Oil Additive protects camshaft lifters and valve train during break-in periods of motors. It is excellent for flat tappet camshafts during break-in or as an additive to any motor oil to prevent premature wear.
- Affordable Solutions
- Not designed for passenger car use
- Exclusive blend of extreme pressure additives
- Excellent for flat tappet camshafts or as an additive
User questions & answers
| Question: | How many quarts does this treat |
| Answer: | I used two bottles when breaking in a marine engine with 8 qts capacity. |
| Question: | What are the zinc and phosphorus concentration rates? Are there any dilution charts |
| Answer: | Lucas Product# 10063 is a zinc additive for engine oil. Its designed for engines with no catalytic converter in the exhaust (pre-1977 cars/trucks) and race engines. This product is also used as an engine "break-in" additive for newly built engines. For non-race applications, one bottle will usually treat two oil changes. Some race-engine applications require the entire bottle. Classic cars (depending on oil capacity) require approximately 2,100 PPM (Parts Per Million) zinc in the oil. Phosphorus levels are not published for this product. Coupon Available. Voted Top in service, warranty and support. Thank you for your interest. FamilyGoKarts 800-950-2210 |
| Question: | How much do you add |
| Answer: | 16 ounce bottle each oil change to protect your engine. However much engine oil you normally add during and oil change, make sure you substract 16 ounces. Then add TB Zinc Plus. |
| Question: | how man oz should i use per quart |
| Answer: | 1 bottle with standard crank case capacity (4-6) quarts. Pour in bottle first, then add oil to full mark. |
High Mileage Oil Stabilizer
LUCAS
Product description
Rejuvenates seals and gaskets. Helps stop leaks, noise and smoking. Contains zinc anti-wear agent ZDDP.
- Package Dimensions: 28.956 H x 8.128 L x 8.382 W (centimetres)
- Package Weight: 0.93 kilograms
- Country of Origin : United States
- Fit type: Universal Fit
User questions & answers
| Question: | How many quarts on a 5 quarts motor capacity |
| Answer: | Yes, It can be used on federal emissions vehicles in NY. |
| Question: | diesel engine use |
| Answer: | It cannot be used in NY. |
| Question: | Can it be used with Quicksilver gear oil on a mercruiser alpha one stern drive |
| Answer: | Please contact us through your Amazon order for this product, we will help you. |
| Question: | Can this be used with full synthetic oil |
| Answer: | Nope. |
Lucas Oil LUC10131 Pure Synthetic Oil Stabilizer - 1 Gallon
Lucas Oil
Product description
Browse our exclusive collection of auto accessories that includes top quality products to enhance the style, comfort and functionality of your vehicle. We provide one stop shop for the perfect auto accessories for the vehicle.
- Virtually Eliminates Dry Starts And Excessive Wear
- Extends Oil And Engine Life
- Stabilizes Oil Pressure And Lowers Oil Temperature
- Eliminates Hesitation, Rough Idle, Stalling, And Poor Fuel Economy
User questions & answers
| Question: | Is Lucas Oil 10131 Pure Synthetic Oil Stabilizer Low SAPS |
| Answer: | 1 quart Lucas 4 quarts oil |
| Question: | Can Lucas 10131 be used with turbocharger? (4 cyl Saab |
| Answer: | it works with any automotive lubricants. |
| Question: | does using lucas oil pure synthetic oil stabilizer help with any start up rattle noise and or any knocking noise |
| Answer: | The mfr. States that it blends well with most oils,however, I believe the oils formulated for those type out drives are formulated to have a low affinity for water contamination. That is to say your oil could foam up from simple condensation in the gearbox while using the Lucas where it would likely not foam with the merc oil. |
| Question: | Can you use this as a fuel treatment too |
| Answer: | Its a 100% petroleum product. |
Lucas Oil LUC10020 Fuel Treatment - 5.25 Oz
Lucas Oil
Product description
Lucas Fuel treatment complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road, locomotive and marine diesel equipment engines. A powerful blend of oils and additives that contain no solvents. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. Formulated for both gasoline and diesel engines, carbureted and fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.
- The product is 5, 25 ounces, fuel treatment, for gasoline LPG and diesel fuel, contains no alcohol/solvents/kerosene/diesel fuel, lubricates rings and cylinder walls for longer life, increases mileage, cleans and lubricates valves, pumps, carburetors, and injectors
- Easy and simple use kit
- The product is manufactured in China
- A great tune-up in a bottle
- Cleans and lubricates the fuel system
- Neutralizes low sulfur fuel problems
- Increases power and miles per gallon by burning excess exhaust emissions
- Increases the life of pumps and injectors
User questions & answers
| Question: | How often can you use |
| Answer: | I use this on every fill up because it lubricates the upper cylinder which increases my gas mileage by about 9%. So it definitely pays for itself. Tho I buy it a gallon at a time and use the smaller bottle to pour into my gas tank. Also, I only put about 7 or 8oz in a 20 gallon tank. Too much of this stuff actually lowers gas mileage. I know from personal experience. If you're looking for a one-per-year cleaner, you really need to look at Techron. This Lucas Oil fuel treatment isn't a strong enough cleaner to use only once per year. I use Techron every other oil change to keep injectors and whatnot clean, but use this Lucas Oil treatment for MPG gains only (from lubricant affects). |
| Question: | Can i Use this in a Toyota corolla 2006? and how often should I use it |
| Answer: | My Toyota dealer sells this product in their service dept |
| Question: | Can I use this in my 2012 kia sorento |
| Answer: | You have to add this before you fill your vehicle up. That way the very action of the pump pumping gas into your vehicle mixes up the Lucas Oil. You don't want to put it in after you filled your gas tank |
| Question: | Will it help remove P0420 code |
| Answer: | 2 bottles of Lucas oil, one gas refill apart, helped with my P0420 Code on Infiniti QX60 engine light. With the 2nd bottle, the light was gone. It worked like a charm. I will continue to keep the fuel tank clean moving forward. Tip : don't wait for the fuel tank to be completely empty before you refill. |
Lucas Oil 10679 10W-30 Petroleum Oil - 5 Quart Jug
Lucas Oil
Product description
Lucas Oil Hot Rod and Classic motor oil is manufactured with the quality paraffinic base oil and fortified with a additive package containing of zinc, molybdenum and phosphorus, which provides a tougher, thicker additive film for protection even under the most severe conditions. It lowers oil temperatures, extends oil life and minimises metal fatigue. It improves the film strength between the cylinder wall and piston rings, slows oil burning and improves pressure in worn engines. It has good cold temperature properties and stands up to high operating temperatures. It is compatible with methanol and all racing fuels, as well as with synthetic and non-synthetic oils.
- Lowers oil temperature
- Minimizes metal fatigue
- Improves pressure in worn engines
- Contains the high levels of zinc necessary to protect flat tappet cams, lifters and pushrods
User questions & answers
| Question: | Be good for a 1988 305 chevy motor |
| Answer: | Not sure what SAPS is |
| Question: | can it be use on 67 mustang |
| Answer: | If you have a turbocharger you should definitely use Lucas. |
| Question: | Whats the difference in this thats 32.00 and the 5 single quart bottles thats |
| Answer: | Had start up noise on my 2013 Hyundai Santa GLS, dealer says it's nothing but engine fuel pump, GDI on top of valve cover (@500.00) making noise , common on GDI systems after I asked @. 90000 I am still running 5W-20 full synthetic mobile 1 . changed oil /filter put in quart of this guess what...be 5500 + miles and still no noise ....saved me from changing that part...and even when I have to stomp down on still no noise...:) : ) |
| Question: | Can i use this engine oil on my 1997 gmc suburban?and would it help quite the lifter ticking |
| Answer: | No, use fuel treatment solution solely |
5 Quarts Lucas Oil 10631 SAE 30 High Zinc Engine Break-In Oils; Requires no moly supplement and no additional additives & Compatible with methanol and high octane race fuel
Lucas Oil
Product description
Lucas Racing Break-In Oils help seal new rings while providing excellent extreme pressure properties that protect the entire valve train and of course, the camshaft. Especially designed for flat tappet camshafts, but can be used wherever you need the extra wear protection in the form of zinc. Formulated in three grades to cover all motors and applications
Recommended for use on initial break-in of both flat tappet and roller camshaft applications for maximum protection and performance. Excellent on track performance prior to switching engine over to the racing only line conventional or synthetic. Compatible with Ethanol, Methanol and high octane race gas.
Zinc levels typically at 3600 PPMS, which is much higher than commercial passenger car oils. Recommended for use in racing applications only. Not recommended for passenger cars requiring API service oil.
- Quicker more efficient ring seal
- Higher levels of zinc and phosphorus maximum protection
- A must use for flat tappet camshaft break-in
- Less blow-by equates more power and better ring seal
- Requires no moly supplement and no additional additives
User questions & answers
| Question: | To everyone who has used this oil did yoh buy the sae 30w or the 20/50 breakin oil |
| Answer: | I ordered SAE 30 and received 20w-50 |
| Question: | is this non-detergent oil ? better for seating piston rings |
| Answer: | Yes... this is a high-zinc break-in oil. Used for helping to seat the rings on an old school, flat-tappet engine. If you're running a full roller lifter set up, this may be a bit of preventative overkill, but it's cheap insurance. I run it for 500 miles then change to a oil designed for older hot rods (i.e.: contains zinc). Lucas also makes an excellent "Hot Rod & Classic" oil in 10w30 and 10w40 once you've broken things in. Note that these oils are NOT for modern engines and/or cars with catalytic-equipped emissions controls. |
| Question: | How long do you run this oil |
| Answer: | Called Lucus oil, they said for my Jeep L 4, at first start keep the RPMs up at med high for 5 minutes and don’t let up. Then run Jeep normally for 800 miles then change oil . |
| Question: | Will this work for a Diesel engine |
| Answer: | 40w is more common for diesel engines. |
Lucas Oil 10131-PK4 Synthetic Oil Stabilizer - 1 Gallon (Pack of 4)
Lucas Oil
Product description
Lucas Oil Synthetic Oil Stabilizer controls heat and wear in motorcycles, air-cooled engines and all drive train components. Reduces friction for more power and more MPG. Light enough for an import and tough enough for a semi. Use in new equipment which requires synthetic oils or any equipment that needs enhanced performance. Also, can be used to protect new and used Heavy Duty and High Performance transmissions, gear boxes and engines.
- Eliminates dry starts
- Increases oil life at least 50 percent
- Reduces oil consumption Increases power and miles per gallon
- Raises oil pressure
- Sold in case packs of 4
User questions & answers
| Question: | Is this the price for 4 gallons |
| Answer: | This oil will not necessarily help your lifter ticking. Try a heavier weight oil or an oil specified for "high mileage" cars. Another thought: try STP oil additive. Also, I would be wary of how the high zinc content in this oil interacts with the catalytic converter. |
Lucas Oil 10576-12PK Safeguard Ethanol Fuel Conditioner - 16 oz, (Case of 12)
Lucas Oil
Product description
Lucas Safeguard™ Ethanol Fuel Conditioner with Stabilizers was developed to specifically address issues associated with using ethanol based fuels. This applies to E-10, E-15, E-85, pure ethanol and any mixtures in between including gasoline. Our Product is completely soluble in all ethanol fuels and will not harm filters. Lucas Safeguard™ Ethanol Fuel Conditioner with Stabilizers contains effective additives to prevent rust and corrosion associated with the use of ethanol fuels.
- Flash point: 60.0
- Package Weight: 5.488 kilograms
- Package Dimensions: 20.066 L x 27.432 H x 26.67 W (centimeters)
- Made in China
User questions & answers
| Question: | Does this remove the ethanol from the gasoline? My classic car vapor locks due to the ethanol lowering the boiling temperature of the fuel |
| Answer: | The difference would be 17.00......;-) |
Lucas Oil 10016 Complete Engine Treatment,16 fl. oz (6)
Lucas Oil
Product description
Lucas Oil 10016 Fuel System Cleaner; Use To Clean/ Lubricates And Fuel Stabilizer For Entire Fuel System And Integral Engine Parts; 16 Ounce Can
- 6 PACK
- Compatibility: Clean/ Lubricates And Fuel Stabilizer For Entire Fuel System And Integral Engine Parts
- Unit Size: 16 Ounce
- Contains Special Lucas Additives That Cause The Fuel To Burn Thoroughly For Fewer Exhaust Emissions And More Miles Per Gallon
- Removes Harmful Deposits On Intake Valves And Cylinder Heads
User questions & answers
| Question: | Is this listing correct as a 12 pack of 16 oz bottles for a total of 192 fluid ounces |
| Answer: | No, this is to treat ethanol-based fuel for storage. I recommend you find a gas station that has a premium with no ethanol. |
| Question: | Should i use this in a new car that i bought in sept 2020 and has 2k miles on it |
| Answer: | Yes, you receive 4 one gallon jugs for this price. |
| Question: | Would this fix a low egr flow check engine light |
| Answer: | Conventional non-synthetic oils for an ‘88 305 would be just as good. The Lucas oil is for my 50-year-old cars and is more expensive. |
| Question: | I have a 6.4 liter power stroke. Does this stuff really work? And what exactly does it do? Is it like the sea foam |
| Answer: | this would be a great oil for 1967 289 motor. |
Lucas Low Viscosity Oil Stabilizer (12 oz)
Lucas Oil
Product description
Lucas Low Viscosity Oil Stabilizer (12 oz)
User questions & answers
| Question: | Can I use this 5w |
| Answer: | It is junk. Killed my high mileage engine 50 miles after I added the prescribed amount to my oil change. Lucas oil did NOTHING to help or explain why. Recommend not using this product. |
| Question: | My camry is using oil and i wanted to use the high mileage oil stabilizer, but was informed it is too thick since the engine has vvt? what do i do |
| Answer: | I have a 2020 gmc Denali and I used it after my first oil change. I will continue to use it after every oil change. I also use in my 2007 hummer h3. |
| Question: | Does this help with oil leaks |
| Answer: | That is question I cannot answer, but I have not had a problem such as this since using the products. |
| Question: | Can rhis used in turbo charger engine with 5w20 oil |
| Answer: | It can be used in gas and diesel fuel, once ounce per quart of oil in crankcase at anytime to increase lubricity and. Allow for longer oil life. It helps clean fuel system and motor inside. There is a video online by morgan Lucas that gives good info. Biggest difference versus the other brands is this contains no alcohol. I use in all my oil changes on 2015 ram, 1991 wrangler, 2014 Corolla and recently 1966 289 and boat and mowers all with excellent results. Preferred product to use in Powerstroke would be synthetic oil stabilizer. |
Latest Reviews
View all
Enzyme Drain Cleaners
- Updated: 30.05.2023
- Read reviews
Spot Cleaner For Pet Stains
- Updated: 04.01.2023
- Read reviews
Nikon Digital Slr Camera
- Updated: 09.03.2023
- Read reviews
Wall Mirror For Entryway
- Updated: 18.06.2023
- Read reviews
Camera Messenger Bags
- Updated: 29.03.2023
- Read reviews