10 best powersports fork tubes

Product description

Harddrive is the American V-Twin division of Western power sports (wps) has been in the power-sports distribution business for 55 years. Headquartered in boise, Idaho, Harddrive offers more than 1, 800 V-Twin products to dealers nationwide.

• Lengths listed for OE Reference may not be exact OE length depending on 94393 year
• Lengths listed are overall lengths
• Please measure your tubes before ordering to ensure correct length is ordered

User questions & answers

Question:	Do they come with spacers
Answer:	The Mustangs are a great value due to their wide variety of good-sounding amp models, on-board effects, and watts per dollar. Many players feel, however, that for a clean amp sound nothing beats a Fender classic tube reissue like the Deluxe. It's good with pedals too. Kind of pricey compared to the Mustangs, but for some "that sound" is where the value lies.
Question:	What length are these tubes
Answer:	It is called a twin reverb because of the twin 12 inch speakers. Not the amplifier. The Deluxe Reverb only has 1 - 12" speaker.
Question:	hello, do you know if these are "show chrome" or "hard chrome?" if you don't know please say so, there is a big difference. Thank you
Answer:	For jazz, it works fine but has limited headroom. It'll do loud, but not really loud clean. If that's a problem just mic it and it's fine in the PA.
Question:	Will these install on my 03 Honda Vt
Answer:	This is a great amp. It has a ton of gain on blue channel and the green channel cleans up nice or you can have a little crunch. There is a resonance control on back that will throw out a lot of low end. I use mine for recording and generally don't have a lot of low end which leaves room for the bass and bass drum. Hope that was helpful.

Product features

Q&A with Author Charles Platt

Some of us learned how to use workshop tools from our parents. My book is written for everyone else, particularly readers ages 10-20. Shop classes at schools may not teach people creatively, and probably won't teach anyone how to use plastics as well as wood. I fill in those gaps.

What need does it fulfill for those readers?

You don't need prior experience. You don't even need a workbench, and you don't need to spend much money. You end up knowing how to fabricate objects that are useful and/or beautiful, using wood and plastic. No other book explains how to do this.

What skills will your readers learn?

A saw, a pair of clamps, an electric drill—these things are basic. But choosing them and using them is not so basic. My book lists the sources, explains the principles, and teaches the use of tools with step-by-step photographs and diagrams. There are more than 20 projects.

Product description

Maxima Fork Oils are formulated from the highest quality base oils and advanced additives to prevent foaming, seal hardening, oxidation and stiction. Lubricinol provides for very low sliding friction and protects internal components from wear. Temperature stable viscosity provides for constant fork action and terrain compliance for the front wheel. For all front suspension systems, both standard and cartridge. 5wt fork oil is normal service weight for MX applications. Consult owners manual for specific applications. Can be blended for intermediate viscosities.

• Maxima Fork Oils are formulated from the highest quality base oils and advanced additives to prevent foaming, seal hardening, oxidation and stiction
• Lubricinol provides for very low sliding friction and protects internal components from wear
• Temperature stable viscosity provides for constant fork action and terrain compliance for the front wheel
• For all front suspension systems, both standard and cartridge
• 5wt fork oil is normal service weight for MX applications, can be blended for intermediate viscosities

User questions & answers

Question:	can i use this on a 1982 suzuki gs650g forks
Answer:	Hello,Overall tube length is 31"
Question:	Is this Harley Davidson 'type b
Answer:	These are ‘show chrome’.
Question:	If i don’t know how much fluid are in the forks already how much do i add? i’m not flushing only adding. what if i over pour
Answer:	If your forks are 39mm
Question:	Can you use this for a 1985 Honda xr80r
Answer:	No, this amp does not have an effects loop.

Product description

Manufactured to precise tolerances from 1018 DOM seamless mild steel tubing.

Centerless ground and show chrome-plated.

Raise or lower front-end or replace stock tubes.

Fork seals should be replaced when changing fork tubes.

Sold in pairs.



This item fits the following vehicle applications:

for Harley Davidson FXSTB Softail Night Train 1999

for Harley Davidson FXDWG Wide Glide 1999

for Harley Davidson FXSTC Softail Custom 1997-1999

for Harley Davidson FLSTF Softail Fat Boy 1997-1999

for Harley Davidson FLSTC Softail Heritage Classic 1997-1999

for Harley Davidson FXDWG Wide Glide 1997-1998

for Harley Davidson FLHR Road King EFI 1996

for Harley Davidson FLTCU Tour Glide Ultra Classic EFI 1996

for Harley Davidson FLHTCUI Electra Glide Ultra Classic EFI 1995-1996

for Harley Davidson FLHTCI Electra Glide Classic EFI 1995-1996

for Harley Davidson FXSTC Softail Custom 1995-1996

for Harley Davidson FLSTC Softail Heritage Classic 1995-1996

for Harley Davidson FLSTF Softail Fat Boy 1995-1996

for Harley Davidson FLSTN Softail Heritage Special 1995-1996

for Harley Davidson FLHR Road King 1994-1996

for Harley Davidson FLSTN Softail Heritage Special 1994

for Harley Davidson FXDWG Wide Glide 1993-1996

for Harley Davidson FLSTN Softail Nostalgia 1993

for Harley Davidson FXSTC Softail Custom 1993

for Harley Davidson FXST Softail Standard 1993

for Harley Davidson FLSTF Softail Fat Boy 1993

for Harley Davidson FLSTC Softail Heritage Classic 1993

for Harley Davidson FXSTC Softail Custom 1991-1992, 1994

for Harley Davidson FLSTC Softail Heritage Classic 1991-1992, 1994

for Harley Davidson FLSTF Softail Fat Boy 1991-1992, 1994

for Harley Davidson FXST Softail Standard 1991-1992

for Harley Davidson FLSTF Softail Fat Boy 1990

for Harley Davidson FLHTCU Electra Glide Ultra Classic 1989-1996

for Harley Davidson FLTCU Tour Glide Ultra Classic 1989-1996

for Harley Davidson FLHS El

• Manufactured to precise tolerances from 1018 DOM seamless mild steel tubing
• Centerless ground and show chrome-plated
• Raise or lower front-end or replace stock tubes
• Fork seals should be replaced when changing fork tubes
• Sold in pairs

User questions & answers

Question:	Are these just the tubes or do they have the springs already inside
Answer:	No sir. I purchased fork tubes that were 8” over so I installed 8” PVC pipe pieces.

Product description

• The CycleVisions Fork Tube Extensions are constructed from Stainless Steel• Fork Tube Extensions are perfect when installing 23" and 26" front wheels, or to raise your bike up 2"• Extends all 41mm and 49mm fork tubes 2"• FL models require 2" longer fork slider covers (sold separately)

• Made from stainless steel
• Extends all 41mm and 49mm fork tubes 2in.
• Perfect when installing 23in. and 26in. front wheels, or to raise the bike up 2in.
• FL models require 2 longer fork slider covers (sold separately)
• NOTE: Will not work with air assist or cartridge fork tubes

Product description

Enjoy improved front end control and ride comfort by converting your dual damper rod or damper rod/cartridge forks found on 02-05 models to true cartridge forks. This kit contains a pair of high-performance, gas charged monotube fork cartridges complete with a set of fork springs. Kit is a direct internal component replacement for all FLH, FLT models from 97-09. No modification to your forks are required. Improved resistance to front brake dive. Improved front end stability. Improved cornering. Improved bottoming control. Lifetime limited warranty. The very best in touring suspension performance.

• This kit contains a pair of high-performance, gas charged monotube fork cartridges complete with a set of fork springs
• Improved resistance to front brake dive
• Improved front end stability
• Improved cornering
• Improved bottoming control

User questions & answers

Question:	does this lowers the harley ? electra glide
Answer:	I think you want 15 weight, I think that is what it takes from the factory, maybe more if you are a heavy rider.
Question:	dyna low
Answer:	Yep
Question:	Does this fit a 2015 street glide? If not can i get a link
Answer:	I always start by removing all the oil from forks. If you don’t it’s hard to tell how much to add.
Question:	Will this fit a 1989 flhtc
Answer:	It will go in the forks just fine. But it might not be the weight you want. You need to look in the shop manual to find out what capacity and recommended oil is. But Maxima does make the correct oil for your bike

Product description

• The CycleVisions Fork Tube Extensions are constructed from Stainless Steel• Fork Tube Extensions are perfect when installing 23" and 26" front wheels, or to raise your bike up 2"• Extends all 41mm and 49mm fork tubes 2"• FL models require 2" longer fork slider covers (sold separately)

• Made from stainless steel
• Extends all 41mm and 49mm fork tubes 2in.
• Perfect when installing 23in. and 26in. front wheels, or to raise the bike up 2in.
• FL models require 2in. longer fork slider covers (sold separately)
• NOTE: Will not work with air assist or cartridge fork tubes.

Product description

• The CycleVisions Fork Tube Extensions are constructed from Stainless Steel• Fork Tube Extensions are perfect when installing 23" and 26" front wheels, or to raise your bike up 2"• Extends all 41mm and 49mm fork tubes 2"• FL models require 2" longer fork slider covers (sold separately)

• Made from stainless steel
• Extends all 41mm and 49mm fork tubes 2in.
• Perfect when installing 23in. and 26in. front wheels, or to raise the bike up 2in.
• FL models require 2in. longer fork slider covers (sold separately)
• NOTE: Will not work with air assist or cartridge fork tubes.

User questions & answers

Question:	Will this fit Yamaha bolt threads
Answer:	It appears the sellers on this ad are not responding to your question. We are not listed as a seller on this particular one but we do offer aftermarket products for Harleys, atv, etc. as well as tires for most any application. According to the search feature on Progressive's site, the correct one for your model would be their part number 31-4004. Let us know if we can ever help you in the future. Thanks, Rich Midwest Traction Tech Support 866-2122508
Question:	Will this fit a 2011 streetbob
Answer:	Yes it fits your 1989 FLHTC Progressive Suspension Makes the Monotubes to fit touring models from 1997 to 2013.
Question:	Does anyone know the thread size and pitch of the fork tube end
Answer:	These are just the tubes. No springs or hardware.

Product description

Made in the U.S.A. by Speed Dealer Customs. Made to fit all 41mm Fork Tubes, many stock Harley models. Necessary when adding a larger front wheel 23" or 26".

• T6061 aerospace grade aluminum.
• Specs: 41mm O.D., 9/16" I.D., 4-1/4" Overall Length
• Listing includes all items in the picture.
• Machined finish
• Fits 1984-2014 Softails, 1994-2006 Touring, 1993-2005 Dynas - Including several models in between. Ask us about fitment if you are unsure.

User questions & answers

Question:	After threading on to the existing fork tube, how do you torque them down? I don’t see anywhere for a socket or wrench
Answer:	It depends on what size your forks are
Question:	Will this my 2013 fxs softail Blackline
Answer:	Standard softail harley Davidson's threads.
Question:	Is this threaded inside the smaller end
Answer:	This one does not lower it. I believe the part number would be 31-2501. Thanks, Rich
Question:	I have a 1996 fxds. Will these fit
Answer:	Not according to Progressive Suspension. You can get the correct set from us by going to our website and at the top of the home page where it says "what are you looking for" type in ps312519. Let us know if we can ever help you. We do communicate with customers and take great pride in our customer service. Thanks, Rich Midwest Traction Tech Support

Product description

For 41mm Front End

OEM P/N: 46566-84

Sold in Pairs

Fits 84-09 Big Twin Models (Exc. 06-Up FXDWG)

• Sold in pairs
• H-D#45866-84

Product description

Fitment:

Universal for the motorcycle with 30mm-50mm diameter fork tubes, just like: for Honda, for Kawasaki, for Suzuki, for Yamaha, for Triumph, for Norton, for BSA, for Ducati, and for Harley, etc.



Specifications:

Material: 6061-T6 Aluminium alloy

Color: Black

Finished: Anodized

Installation bolt hole: 8mm

Fork Diameter：27mm/30mm/31mm/33mm/35mm/36mm/37mm/38mm/39mm/41mm/43mm/45mm/46mm/48mm/49mm/50mm/52mm/54mm/55mm



Package included:

1 Pair high quality motorcycle headlight mount bracket

• High quality thicken aluminum alloy, hardness and durable to use.
• Not easy to cause deformation as the steel material.
• Easy to install and remove.