14 best air tanks

Product description

Fully assembled and ready to use 5-Gallon portable air carry tank. Unit has a high quality brass manifold and is equipped with an air pressure gauge, air line shut-off valve, pressure relief valve, easy access fill valve, 3-Feet by 1/4-Inch air hose and air chuck. With a durable, welded on carry handle this unit is perfect for emergency tire inflation, blow cleaning and recreational inflation.

• 135 Max PSI
• Fully assembled, ready to use
• High quality brass manifold
• Durable welded on handle
• Equipped with air pressure gauge, air line shut-off valve, pressure relief valve, easy access fill valve, 3-Feet by 1/4-Inch air hose and air chuck

User questions & answers

Question:	Can it add air to a class A motorhome
Answer:	What I did was, instead of pushing the straw into the cone attachment, I pushed the straw *out* of the cone attachment, then attached the merged units onto the duster. Hope that helps.
Question:	is this tank made in usa
Answer:	No, it is not ESD safe, but can be used if careful. The material is plastic which is an insulator that holds a charge. We are talking potentially thousands of volts! Keep the nozzles at least a few inches away from the motherboard or any electronics, spray from a distance, this is a powerful blower so it still works great. Never use the brushes on anything internal, only use them on case exterior, keyboard, etc.
Question:	can i use a black and decker max multi-purpose inflator to fill it up (or any other small portable compressors
Answer:	The amount of pressure is very close to canned air, just a bit less than a full can of air. There is no build up limit, the power reaches 100% upon flipping the "On" switch. There are 2 speeds.
Question:	Can the hose be removed and another one put on
Answer:	No idea

Product features

Ideal for Emergency Tire Inflation

The Pro-Force FT5 5-Gallon Portable Air Tank is a fully assembled and ready to use 5-Gallon portable air carry tank. This unit has a high quality brass manifold and is equipped with an air pressure gauge, an air line shut-off valve, pressure relief valve, easy access fill valve, 3 feet by ¼ inch air hose and air chuck to make inflating applications simple and easy. The Pro-Force FT5 5-Gallon Portable Air Tank comes with a durable and convenient welded on carry handle, making it easy to carry along.

Product description

The Craftsman 6 gallon air compressor features an oil-free pump for maintenance-free operation and a long life. It is lightweight and portable at 30lbs, and features a long runtime and quick recovery.

• 6 gallon pancake maximizes portability and stored air
• Durable, oil free pump for long life and no maintenance
• 150 max PSI to ensure adequate cut in pressure for a variety of applications
• 2.6 SCFM @ 90 PSI allows for quick compressor recovery time. Voltage - 120 volt
• Easily starts up in cold weather
• 13 piece accessory kit includes: 25' X 1/4inches Pvc air Hose with coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA safety nozzle, rubber tip, three inflator adaptors
• 1 year limited warranty, refer to "warranty & support" section below for full details

User questions & answers

Question:	Is this made by black and decker? what lind of gears does it have? are they vynil
Answer:	Three.but have adapter to use 2 holes.
Question:	Is this unit built in the U.S
Answer:	No it doesn’t come with it. You have to buy it separately. You can get it from Home Depot.
Question:	What is the noise rating on this? Is it louder than comparable brands
Answer:	Yes it connects to an air compressor.
Question:	How many amps? Need to know if it will trip my standard 15 outlets or if it needs to run on a 20 amp outlet
Answer:	I will use Amazon when I need them. Just purchased product so do not need one now.

Product description

This convenient air tank from Performance Tool provides a maximum psi of 125 to help in any on-site job or project in the shop. Light-weight and with a handle for easy transport, this portable air tank can go wherever you need it. The hi-viz color on this pressurized air tank offers added visibility.

• PRESSURE GAUGE: Displays air pressure in PSI and MPa; 125 maximum psi
• DURABLE AND PORTABLE CONSTRUCTION: Industrial grade air hose with standard tire air chuck; light weight and convenient handle for easy transportation
• EASY CONNECT: Connects to standard compressed air source
• SAFETY VALVE: Safety pressure bypass valve with manual override

User questions & answers

Question:	Can i remove the schraeder valve and thread in another npt valve, or is it pressed on
Answer:	Dear customer, Yes, it's safe to clean the vinyl albums. Please keep the vinyl albums in a stationary place to clean in case blowing it away. If you have any problem about the air duster, please contact us freely. Best regards, OPOLAR customer service,
Question:	What size NPT is the fitting
Answer:	Dear customer, Yes, the unit can work continuously for half an hour, after it's out of power, please charge it, usually it takes 3h to get on a full charge. If you have any problem using the unit, please contact [email protected]. Have a nice day. Sincerely. OPOLAR customer service.
Question:	Is there a port for a gauge and another for output? what is the thread of the other port/ports? Thanks
Answer:	Dear Customer, It is made in China. I hope it helps. Regards, OPOLAR Customer Service
Question:	Where's this tank made
Answer:	No you don’t need to remove the fans. They need to be blown out also. Just make sure you unplug the power before blowing it out.

Product features

Air Tank Repair Kit

Air shutoff valve: A knob that turns to prevent air from leaking out of the tank when it's not in use.

Air pressure gauge: Indicates the air pressure inside the tank as well as how full the tank is.

Flexible hose: The hose for delivering compressed air from the tank. Hoses may attach to the tank with a threaded fitting or a quick-connect fitting.

W10056 Air Tank Manifold

The tank end is 1/2" MNPT male. The gauge port is 1/8" FNPT. The outlet (hose) port is 1/4" FNPT female.

W10057 Air Hose

4 feet PVC air tank hose with both brass ends. The one end is equipped with a 1/4" (F) NPT tire chuck and the other end is 1/4 inch MNPT Thread.

W10055 Pressure Gauge

The pressure will be displayed in the 2-inch face gauge which has 2 units PSI and MPa (0 - 200 PSI, 0-1.4MPA).

Aluminum Knob

The red knob connected to this valve allows you to easily turn on/off the air flow to the air hose. And prevent air from leaking out of the tank when it's not in use. The material aluminum is much more durable than the plastic one knobs and will last a much longer time under normal use. You will find this Aluminum knob on the following part numbers W10011 11-Gallon Air Tank, W10005 5-Gallon Air Tank, W10056 Air Tank Manifold, and the W10058 3pc Air Tank Repair Kit.

Product description

California Air Tools AUX05 - 5 Gallon Steel Auxiliary Air Tank is designed for portability and easy to use. The lightweight and easy carry designs make transporting this air tank very easy. California Air Tools auxiliary air tanks are designed to provide an extra supply of air needed for short-term demands such as inflating tires. These auxiliary air tanks provide stable pressure and a constant air flow for purposes such as spray painting. Having the California Air Tools auxiliary air tanks will allow you to have an extra supply of air for more time before the air compressor motor/pump starts to run. The Easy to Use Quick Connect Fittings on the Air Hose and Air Valve allows you to quickly attach the Air Hose to an air compressor and fill the auxiliary air tank without needing extra air fittings. This Easy to Use Quick Connect System also allows you to connect a standard air hose to your air valve for use with air tools. More Air, Less Noise and Easy to Use, California Air Tools Auxiliary Air Tanks! L - 20.8'    H - 12.2"    W - 8.6" Wt. - 17 lbs.

• 5 Gallon Steel Air Tank
• Easy to use Quick Connect System
• Lightweight & Portable
• Hose and Air/Tire Chuck Included

User questions & answers

Question:	Steel or Aluminium which is better
Answer:	2019/10
Question:	What is the max psi on the *steel* tank
Answer:	You are correct the metal breaks down over the years
Question:	does this tank have a valve to let moisture out of the tank
Answer:	They are empty , you have to get them filled. OSHA rubles are such that they can’t come filled. We ended up taking them to a scuba shop and they filled them for a decent price.
Question:	What is max pressure? 100psi? 150psi
Answer:	The tank fitting appears to be 1/2" female thread.

• Capacity: 5 Gallon (18 Liter)
• Pressure Rating: 200 PSI
• Ports: 6 x ¼ inch NPT, 2 x ½ inch NPT
• 240 PSI Air Pressure Gauge
• 170-200 PSI Pressure Switch

User questions & answers

Question:	Is this a dot rated tank? does it have a stamp or badge on it saying so
Answer:	Yes. You can attach an air line directly to the tank, by shopping for the size fittings and pipe supply that it will require, at a hardware store. However, if you want to mount the pump itself directly to the tank, you will need to weld two platforms onto the tank, to hold the pump and the electric motor. The tank can be pumped up to 175lbs of pressure.
Question:	Hi, odd question i know but can i use this tank to temporarily/momentarily store saturated steam at about 260 degrees f at a max of 20 psig
Answer:	Derick,It does not have a regulator.
Question:	can this be used as a slave tank for my pancake compressor I need more air capacity
Answer:	zero, if you are willing to wait through Amazon
Question:	What are the limitations of this tank? can i use pnumatic tools for auto work? auto painting? tire inflation? what are things i can't do? thanks
Answer:	Yes.... Works with any regulator besides SLP.

Product features

8 Ports

Tank has one 1/4" NPT port and one 1/2" NPT port in the front, one 1/4" NPT port on the left side, three 1/4" NPT ports, one 1/2" NPT port on the right side and one 1/4" NPT port at the bottom.

Pressure Switch

Preset to turn on the compressor when air tank's pressure is below 170 PSI, and turn off the compressor when the air tank pressure reach 200 PSI.

Pressure Gauge

Compact single needle 240 PSI air gauge with black color bezel, the perfect solution to accurately read pressure in the air tank.

Accessory Pack

• 250 PSI Safety Valve
• 1/4" NPT Wing Style Drain Valve
• 1/4" NPT Compression Fitting for 1/4" OD Air Line
• 1/4" NPT Hex Head Male Plug
• 1/2" NPT Hex Head Male Plug
• 1/4" OD Nylon Plastic Hose (6 Feet)
• Thread Sealant Tape
• Mounting Hardware

Product description

This Industrial Air ASME Certified 175 PSI air tank is fully assembled and ready to use. The carry tank is multi-functional and can be used vertically or horizontally (complete with ring base for a vertical air storage tank, four feet with solid vibration isolators on each). it comes with two Welded on carry handles and a quarter turn tank drain valve.

• 2-in-1 multi-function 175 PSI ASME certified air tank
• Fully assembled and ready to use
• Can be used in either a horizontal or vertical orientation
• Works as a horizontal or vertical auxiliary air storage tank with a compressor or as a portable air carry tank
• Two air access assemblies, an auxiliary air storage tank to use with your compressor, or a portable carry tank when you are on the go

User questions & answers

Question:	Can it be wall mounted? what is the distance between the foot pegs
Answer:	Absolutely. Nitrogen is an inert gas and not dangerous at all.
Question:	Can i pipe a compressor directly into this tank? In other words can this replace an old rusted tank
Answer:	Yes you can. I had to at a tee in order to put a valve fitting and a quick connect fitting on. On the valve I have the inlet connected to my compressor. I use the quick connect as my outlet to my air tool. Works great at hold pressure for months at 120psi.
Question:	does this have a regulator on it
Answer:	Label says maximum working pressure is 125 psi.
Question:	What is shipping cost for this tank
Answer:	No regulator but comes with a tank gauge

Product features

Industrial Air 20 Gallon Air Receiver Tank

Features and Benefits:

Multi-Functional

Use an air hose from your air compressor to connect to this line and easily fill the tank. You now have an auxiliary air storage tank to use with your compressor.

Use an air hose to connect to the quick coupler end and you now have a portable carry tank. Attach a tire chuck, a tire inflator, a blow gun, etc. to the opposite end of your air hose and you are ready to use your portable air.

Easy Operation

The unit comes fully assembled and ready to use.

Quarter turn tank drain valve allows for quick and thorough tank draining.

Maximum Portability

Two welded on carry handles offer easy transportation to various job sites.

The ring base allows for convenient storage.

• Capacity: 4 Gallon (15 Liter)
• Pressure Rating: 200 PSI
• Ports: 4 x 3/8" NPT, 3 x ¼" NPT
• 100% Weather Resistant (Anodized)
• Less weight compared to regular steel tanks

User questions & answers

Question:	Will I need to chase these threads with a tap to get a proper seal? I'll be putting 175psi to the system and need it stable
Answer:	Haven’t installed yet

Product features

7 Ports

Tank has two 3/8" NPT ports in the front, one 3/8" NPT port, two 1/4" NPT ports on the left side, one 3/8" NPT port on the right side and one 1/4" NPT port at the bottom.

Large Diameter Ports

Featuring large diameter ports which prevent the bottle necking that you may find on air tanks with smaller ports.

Lightweight and Rust Resistant

Because is made of aluminum, this tank has the benefit of being much lighter than a standard steel tank while being also 100% resistant to rust.

Anodized Finish

The tank goes through an electrochemical conversion process that develops a thicker layer of aluminum oxide which protects the surface of the tank against corrosion and scratches while giving an outstanding smooth and glossy metallic appearance.

Product description

Torin Big Red 11 gallon portable air tank holds compressed air for months. Great for inflating car tires, bike tires, sporting, air mattresses and recreational equipment. Stores out of the way in your car, truck, SUV, garage or home. Portable air supply where and when you need it. Easy to read pressure gauge and a 50" high pressure air hose with ball chuck. Built-in pressure release valve for safety.

• 11 gallon portable gas air tank
• 50" high pressure air hose with ball chuck
• Easy to read pressure gauge
• Built-in pressure release valve for safety
• Holds compressed air for months
• Easy to read pressure gauge
• Built-in pressure release valve for safety

User questions & answers

Question:	Can a regulator be attached? I need about 5 psi but long lasting (11 gallon tank). Is it a 1/4" size
Answer:	For refills, there is a side nipple to fill it from a scuba tank or powerful air compressor, and on the top, there is the air output for a universal air hose.
Question:	Can you put nitrogen for tire inflation in this unit or can you recommend one that will
Answer:	One day you will but probably not from the mini gs
Question:	Can i hook this up to my current air compressor and increase its current capacity
Answer:	Yes, but you need a HPA compressor to fill it.
Question:	How much pressure will this tank safely hold
Answer:	It will safely hold about 100 psi. Not sure what your motorhome tires need. It might be enough to top off one tire but would not fill a flat.

Product description

STEALTH Saa-Air-110T Air Tank designed for portability and easy to use，this auxiliary tank holds up to 10 gallons of portable air operating at 225 psi to do the hard work for you. 4pcs quick coupler use multiple pneumatic tools at the same time to improve work efficiency.Measuring 20 inch/ 12 inch/ 17 inch, and weighing 40.8 lbs, this light weight and with a handle for easy transport, this portable air tank can go wherever you need it. More Air, Less Noise and Easy to Use, Air Tools Auxiliary Air Tanks!

• ▲【POWERFUL PERFORMANCE】Large capacity with10 gallon ,high pressure maximum 225psi pressure to provide strong motivation for your tools, Configured 4pcs quick coupler simultaneously meet multiple tools different needs at work
• ▲【PRECISE GAUGE】With tank and tool gauges dual meter ,Design the display up ward facing gauge ,makes reading the gauge easy and convenient
• ▲【EXCELLENT DESIGN】Integrated tank welding machine design bringing ultra-high use safety ,The sewage outlet design can discharge sewage and increase the service use life
• ▲【EASY AND SAFE MOVE 】Saa-110T air tank the weight only 40.8lbs easy to move,Both the handle and the bottom bracket are made of non-slip design to ensure the stability of the device during use
• ▲【WHAT YOU WILL GET】Air tank x 1 User manual x 1, Lifetime warranty committed by our friendly and quick-response customer service

User questions & answers

Question:	What type of SS it is made from? 304 or 316? Also does the tool pressure regulator controls all the outlets
Answer:	I try to maintain 110 psi in the tank everyday. Works great, no issues..
Question:	so the tank is made from SS, mening we dont have to warry about condensation? is it 304 or
Answer:	no it is not quick release just a pressed on fitting, tank can be filled with air hose in on or off position, valve needs to be turned on to fill tires or item being inflated, nice tank
Question:	The description of the tank says limited lifetime warranty. The user manual says 1 year. Which is the correct one
Answer:	Yes you fill and refill the tank from an air compressor. How long it last depends on what you are filling up and how much pressure you put in the tank. It will likely be able to air up a low tire on a car or pickup.
Question:	what exact type of connectors are needed
Answer:	No the tank does not come with a needle. You can buy the needle that will fit into the hose connect that comes with the tank, then it can be used to air basketballs, water toys, etc. This tank can be used for many jobs, with the proper nozzles. Those nozzles are usually purchased separately. The main thing I use the tank for is to provide an air supply away from my compressor, the tank is a lot lighter than loading and unloading my compressor. I hope that this helps.

Product features

STEALTH Saa-110T 10 Gallon High Pressure Air Tank

Stealth Air Tank is the perfect solution for taking on tough jobs. Portable enough to bring anywhere. You've got big jobs to do and you want it done faster, easier and quieter. Stealth Air Tank bring you the best choice,ensure you complete daily work efficiently

Product Features

225 PSI air tank

5 quick connect couplers (4 unregulated + 1 regulated) allow for easy one handed connections of hoses and/or splitters

Accurate dual gauges for tool/tank pressure, pressure gauges are encased in steel for high durability

Rubber-reinforced Handle

Steel legs provide additional support, stability and increase durability

Fully assembled, ready to use

Multi-function Air Tank

Use an air hose from your air compressor to connect to air tank and easily fill the tank ,You now have an auxiliary air storage tank to use with your compressor, A portable carry tank. Attach a tire chuck, a tire inflator, a blow gun, etc. to the opposite end of your air hose and you are ready to use your portable air

STEALTH Air Tank 10 Gallon Steel Auxiliary Air Tank Is Designed For Portability And Easy To Use

The lightweight and easy carry design makes transporting this air tank very easy. Air tanks are designed to provide an extra supply of air needed for short-term demands such as inflating tires. These auxiliary air tanks provide stable pressure and a constant air flow for purposes such as spray painting. The Easy to Use Quick Connect allows you to quickly attach the Air Hose to an air compressor and fill the auxiliary air tank without needing extra air fittings. This Easy to Use Quick Connect System also allows you to connect a standard air hose to your air valve for use with air tools

Application Scenarios

Stealth 10 gallon portable air tank, Great for inflating car tires, bike tires, sporting, air mattresses and recreational equipment. Stores out of the way in your car, truck, SUV, garage or home. Portable air supply where and when you need it

Product description

5 gallon air bead seater which is made of solid steel. The on/off valve which is designated for controlling the filling of tank. A air gauge exposed which tells you the air volume accurately. Our item is essential for your tire beading. It is suitable for heavy duty vehicle such as truck, atv, tractor and soon.

Features:

• Quick and Easy Air Inflation - After putting the high pressure tube correctly to the gap between the tire and the wheel rim and turn ON the valve quickly, you will spend short time finishing inflating the tire and then turn OFF the valve
• Durable Carbon Steel and Powder Finish - 5 gallon air tire inflator is made of 2.5 mm carbon steel which is solid and durable enough to maintain long-term useful. Exquisite powder finish makes it rust and corrosion resistant
• Convenient to Take - The size and well-designed handle, the high-pressure inflator is perfectly portable
• Easy to Read Gauge - Different vehicles needs different level operating pressure. Gauge can help you accurately read and adjust pressure for various vehicles
• Suitable for Many Vehicles - The high-pressure air inflator is suitable for vehicles, cars, trucks, lawn tractors, tractor, large tractor , RVs, ATVs and more. It is also convenient for you to take with handle

Specifications:

• Color: Yellow
• Material: 2.5 MM Carbon Steel
• Tank Capacity: 5 Gallons
• Operating Pressure: 85-116 PSI (0.6-0.8 Mpa)
• Maximum Pressure: 145 PSI (1 MPa)
• ATV Tire: 40 PSI
• Lawn Tractor Tire: 40-50 PSI (2.7-3.4 Bar)
• Tractor Tire: 100-120(6.8-8.2 Bar)
• Large Tractor Tire: 120 PSI (8.2 Bar)
• Car Tire: 50-60 PSI (3.4-4.1 Bar)
• Truck Tire: 100-130 PSI (6.8-8.2 Bar)
• 4 x 4 Tire: 6-80 PSI (4.1-4 Bar)
• Air Compressor Required: Yes

Package Contents:

• 5 Gallons Air Bead Seater
• Threaded Barrel

• Suitable for Many Vehicles - The high-pressure air inflator is suitable for vehicles, cars, trucks, lawn tractors, tractor, large tractor , RVs, ATVs and more. It is also convenient for you to take with handle
• Quick and Easy Air Inflation - After putting the high pressure tube correctly to the gap between the tire and the wheel rim and turn ON the valve quickly, you will spend short time finishing inflating the tire and then turn OFF the valve. Before air inflation, please wear the ear and eyes protector
• Durable Carbon Steel and Powder Finish - 5 gallon air tire inflator is made of 2.5 mm carbon steel which is solid and durable enough to maintain long-term useful. Exquisite powder finish makes it rust and corrosion resistant
• Easy to Read Gauge - Different vehicles needs different level operating pressure. Gauge can help you accurately read and adjust pressure for various vehicles. The maximum pressure of our inflator is 145PSI (1.0Mpa)
• Designed Lip - A specially designed lip keeps the threaded barrel at the perfect angle for air insertion during bead seating, while the quick-release valve spreads the air to deliver a full impact of air discharge into the tire

User questions & answers

Question:	I would like a longer pipe but can’t find a thread that fits. Any suggestions
Answer:	it is 11/2 in. pipe thread
Question:	I am missing a part
Answer:	yes it does come with the tube
Question:	Hello, i received his items a month ago and haven’t open the box. But today I open the box and it doesn’t have the threaded barrel
Answer:	Send it back
Question:	Will this seater seat skidsteer tires
Answer:	Possibly. But few sister tires I have work on I don't think it will

• Capacity: 5 Gallon (18 Liter)
• Pressure Rating: 200 PSI
• Ports: 4 x ½" NPT, 2 x 3/8" NPT, 3 x ¼" NPT
• Anti-Corrosion Black Matte Powder Coating
• Mounting Hardware Included

User questions & answers

Question:	Does this come with a compressor motor
Answer:	No, it needs compressed air to operate

Product features

9 Ports

Tank has four 1/2" NPT ports in the front, one 3/8" NPT port, two 1/4" NPT ports on the left side, one 3/8" NPT port on the right side and one 1/4" NPT port at the bottom.

Large Diameter Ports

Featuring large diameter ports which prevent the bottle necking that you may find on air tanks with smaller ports.

Mounting Hardware

Screws, washers and nuts are included with the tank.

Product description

airmaxxx Steel Air Tank



5 Gallon 9 Ports:

4 - 1/2"npt Ports (all on the front)

2 - 3/8"npt Ports (1 on each end)

3 - 1/4"npt Ports (2 on one end & 1 for drain on bottom)



Approx. Air Tank Dimensions:

33" Long 7" Wide 8.25" Tall



200 psi Max

• Gloss Black Powder Coat Finish
• 9 Ports (4- 1/2"npt, 2- 3/8"npt & 3- 1/4"npt)
• Approx 33" Long, 7" Wide, 8.25" Tall
• 200 psi Max

• Capacity: 4 Gallon (15 Liter)
• Pressure Rating: 200 PSI
• Ports: 4 x 3/8" NPT, 3 x ¼" NPT
• Anti-Corrosion Black Matte Powder Coating
• Mounting Hardware Included

User questions & answers

Question:	dose this tank include plugs for the holes
Answer:	No this tank does not have a valve to let out moisture.
Question:	Location of the 1/4 port
Answer:	125 is red line on gauge, and the blow-off is 140 PSI. Most things have at least an engineering safety factor of 2X.
Question:	Is the logo on the tank permanently
Answer:	You can but the drain plug won't work

Product features

7 Ports

Tank has two 3/8" NPT ports in the front, one 3/8" NPT port, two 1/4" NPT ports on the left side, one 3/8" NPT port on the right side and one 1/4" NPT port at the bottom.

Large Diameter Ports

Featuring large diameter ports which prevent the bottle necking that you may find on air tanks with smaller ports.

Mounting Hardware

Screws, washers and nuts are included with the tank.

Product description

airmaxxx 24" Seamless Spun Aluminum Air Tank

Raw, Unpolished

3 Gallon , 6 Ports

3 - 1/4"npt Ports (two on one end, one on other end)

2 - 3/8"npt Ports (one on each end)

1 - 1/4"npt Port for Drain on Bottom



Approx. Air Tank Dimensions:

24" Long 7" Wide 8" Tall



250psi Max

• Raw, Unpolished Aluminum Finish
• With 2 Adjustable Mounting Feet & Straps
• ​constructed of highly durable aluminum, non corrosive & lightweight
• single piece of extruded aluminum tube, perfect for any & all applications

User questions & answers

Question:	what does it weigh
Answer:	A lot lighter than steel
Question:	What kind of plugs I can use? Countersunk or center bore
Answer:	any NPT (National Pipe Thread) Plug
Question:	What size and thread are the holes
Answer:	There are 3, 1/4”NPT holes and 2, 3/8” NPT holes. 5 holes total.
Question:	What is the pressure rating and dimensions
Answer:	250psi max and it’s 24”L x 8”T