9 best powersports mirror controls

Product description

Flush-Mounted Design Cleans Up the Look of Your Late-Model Triumph After You Remove the Stock Mirrors

A Must When Using Bar End Type Mirrors

Fully CNC MacHined From 6061 T-6 Billet Aluminum

Easy Installation

Mounting Hardware Included

Sold in Pairs

Made in the USA

Please Note: The Image Displayed Is Representative of the Item, but May Vary Depending Upon Your Specific Model.

• Flush-mounted design cleans up the look of your late-model for Triumph hand controls after you remove the stock mirrors
• A must when using bar-end type mirrors
• Fully CNC machined from 6061 T-6 billet aluminum, then black anodized
• Easy installation
• Mounting hardware included

User questions & answers

Question:	Does $21.97 include the pair(two
Answer:	They are very easy to put on & super cute. I’m assuming that with arthritic feet she has pain?? There’s obviously no support in the shoe, just a flexible sole so I don’t know how that would be for comfort. If she’s not doing a lot of walking it should be fine.
Question:	Does this fit a Triumph Bonneville T
Answer:	Yes, the sole is very thin. Of course it depends, i guess, on the sized of the rock a bit too. I bought these to keep from burning my feet on the concrete at the pool and the sand at the beach. If you are walking on rocks over concrete, you will feel them, but they would not tear up your feet or cause injury. These shoes are not designed for running.

Product description

10mm Metric Mirror Adapter Enables You to Mount Mirrors With 5/16"-24 Mounts on Metric Bike Controls

Super Low-Profile Design Keeps the Mirror Base Looking Clean, Opposed to Some Aftermarket "Messy" Looking Adapters Out There

Right Thread 10mm on One End and Threaded 5/16"-24 on the Other

Heat Treated Alloy Threaded Stud and Stainless Steel Jam Nut Included

Installs in Seconds With an Allen Wrench

One Adapter Needed Per Mirror

Sold Individually

Made in the USA

Please Note: The Image Displayed Is Representative of the Item, but May Vary Depending Upon Your Specific Model.

• 10mm metric mirror adapter enables you to mount mirrors with 5/16in.-24 mounts on metric bike controls
• Super low-profile design keeps the mirror base looking clean, opposed to some aftermarket messy looking adapters out there on the market
• Available in a right thread 10mm on one end and threaded 5/16in.-24 on the other
• Heat treated alloy threaded stud and stainless steel jam nut included
• Installs in seconds with an Allen wrench

• Designed by bikers for bikers, Magazi is the brand of mirrors you shouldn't be without.
• Pair of nicely CNC crafted eye catching square shape aluminum mirrors
• Viper series is wicked and bad. Very very bad.
• Universal fit

User questions & answers

Question:	This fit my 2005 xl1200c sportster
Answer:	I can't say with 100% certainty, but they fit did my 2007 Bonneville, which I suspect has the same controls and mirror perches as the T100/120.
Question:	This fit a 2005 XL 1200 custom Sportster
Answer:	It did keep most sand out of it (atleast I didn't feel it) but after each use when I rinsed it out there was a very tiny bit of sand in it. I bought it to prevent sand and plants and all at my feet and it does work great.
Question:	Will it fit my Kawasaki vulcan
Answer:	a thin flimsy nylon thingy similar to a tote bag

Product features

CNC milled aluminum

Convex mirror glass

Ball joint

Product description

Specification:

• Condition: 100% Brand New
• Material: ABS Injection Molded Housing, HD Glass and Steel Stem
• Mirror type: Convex
• Mirror Size: 6.14(L) x 3.34(W) Inch
• Mirror Weight: 0.44 KG
• Mirror Clamps: 0.1 KG

Package Includes:

• 1 pair of Mirrors (Left & Right)
• 1 pair of Clamps
• Instructions Included (Please check the products picture, it will display the Instructions)

Features:

• Good weather ability and smooth surface
• Ball-type universal connecting joint, can be 360 degrees rotated
• Convex mirrors design make objects appear smaller and farther away in order to provide the driver with a larger view of what is behind him
• The plastic parts of the mirror stem along with shockproof feature, effectively prevent the mirror's connection joints from easily swinging during driving
• Suitable for any standard 7/8 diameter bars with handlebar adapter
• Its stylish design is perfect to decorate your motorbike
  
  

Fitment:

• Most brands of 7/8 inch Motorcycle Dirt Bike Quad Street Bike Adventure Snowmobile Jet ski Scooter Coolster Moped GY6 ATV's, etc.

Quality Assurance:

• MZS value the shopping experience and satisfaction of each customer, so we provides lifetime technical support. No matter what the problem , please contact us first, we will do our best to solve any problem for you.

• INSTALL NOTICE - They are aftermarket parts, not OEM mirrors, some model may need to be slightly modified. Please check the mirrors title or description to make sure that this model type and model year works for your model. And we provides lifetime technical support and 6 months damage replacement services, make sure you have no worries.
• FITMENT - Motorcycle Dirt Bike Quad Street Bike Adventure Snowmobile Jet ski Scooter Coolster Moped GY6 ATV's
• SECURE AND STABLE - Adopted high impact ABS housing and Plastic, along with shockproof feature, effectively prevent the mirror's connection joints from easily swinging during driving
• BASIC FUNCTION - This rearview mirror to increase the driver's awareness and field of vision and to remove blind spots by allowing the driver to see the vehicles and conditions behind him, and it have extremely Bright Long Lasting Turn Signals.
• BEST VISION POSTION - Set the Left Mirror to see What is Behind you and Set the Other Mirror for What is in your Rear-Three-Quarters Vision

User questions & answers

Question:	Will this fit on a can am outlander
Answer:	Yes, this ATV Rear View Mirrors can fit Outlander.
Question:	will these mirrors fit a cfmoto 600 atv
Answer:	This ATV Mirrors can fit Cfmoto 600 ATV, but before you buying, please check your bike's handlebar whether have enough space to install the mirror clamp.
Question:	Will these mirrors fit a pride mobility Scooter
Answer:	May I know if there are holes to install the mirror? And the size is 10MM standard bolts. If there is no hole, is your handlebar 7/8? If your handlebar is 7/8, you can install it. If you have any questions, please contact us by Clicking ”Ask Product Question” beside your Amazon order free, we’ll help you.
Question:	Is there a mount available for something larger than a 7/8 inch bar
Answer:	No, this mirrors only can fit 7/8 inch.

Product description

New OEM Polaris Mounted ATV Mirrors Left & Right Set 2011 2012 Polaris Sportsman 90 400 500 550 700 800 850 2877222

• 2012 SPORTSMAN 400 HO 4X4, 2012 SPORTSMAN 500 HO, 2012 SPORTSMAN 550, 2012 SPORTSMAN 800 EFI, 2012 SPORTSMAN 800 EFI 6X6 2012 SPORTSMAN 90, 2012 SPORTSMAN EPS 550, 2012 SPORTSMAN FOREST 550, 2012 SPORTSMAN FOREST 5OO, 2012 SPORTSMAN FOREST 800, 2012 SPORTSMAN FOREST 800 6X6
• 2012 SPORTSMAN FOREST 850, 2012 SPORTSMAN FOREST TRACTOR 500, 2012 SPORTSMAN TOURING 500 HO, 2012 SPORTSMAN TOURING EPS 550, 2012 SPORTSMAN TOURING EPS 850, 2012 SPORTSMAN X2 550
• 2012 SPORTSMAN X2 550 INTL, 2012 SPORTSMAN XP 850, 2012 SPORTSMAN XP EPS 850,m 2011 SPORTSMAN 400 HO 4X4, 2011 SPORTSMAN 500 HO
• 2011 SPORTSMAN 550, 2011 SPORTSMAN 800 EFI, 2011 SPORTSMAN 800 EFI 6X6, 2011 SPORTSMAN 90, 2011 SPORTSMAN EPS 550, 2011 SPORTSMAN FOREST 500, 2011 SPORTSMAN FOREST 550
• 2011 SPORTSMAN FOREST 850, 2011 SPORTSMAN FOREST TRACTOR 500 EFI, 2011 SPORTSMAN TOURING 500 HO, 2011 SPORTSMAN TOURING EPS 550, 2011 SPORTSMAN TOURING EPS 850, 2011 SPORTSMAN X2 550, 2011 SPORTSMAN X2 850, 2011 SPORTSMAN XP 850, 2011 SPORTSMAN XP EPS 850

User questions & answers

Question:	Does it fit a 2017 Polaris
Answer:	Nice mirrors and they come with adapters, put them on a Honda Sabre, but I think the threads are the same
Question:	will these fit a 2016 polaris sportsman 570SP
Answer:	Hello, yes, it's coming with 5/16"-24 threaded adapters for Harley-Davidson bikes. Thank you.
Question:	Will it for on my 2004 Sportsman? The picture looks like it would
Answer:	To be truthful I don't know I've never owned a Kawasaki
Question:	Will these fot a 1999 polaris sportsman? Thnaks
Answer:	TWO

Product description

This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle's specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.

• Perfect replacement - reverse engineered to look, fit and function exactly like the original door mirror on your vehicle's specific year, make and model
• Complete assembly - includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
• Cost-effective and reliable - functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
• Easy installation - no special tools or equipment is necessary for installing this new part
• Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
• VEHICLE FITMENT: 2008-2011 Cadillac Escalade,2008-2011 Cadillac Escalade ESV,2008-2011 Cadillac Escalade EXT,2008-2011 Chevrolet Avalanche,2008-2011 Chevrolet Silverado 1500,2008-2011 Chevrolet Silverado 2500 HD,2008-2011 Chevrolet Silverado 3500 HD,2008-2011 Chevrolet Suburban 1500,2008-2011 Chevrolet Suburban 2500,2008-2011 Chevrolet Tahoe,2008-2011 GMC Sierra 1500,2008-2011 GMC Sierra 2500 HD,2008-2011 GMC Sierra 3500 HD,2008-2011 GMC Yukon,2008-2011 GMC Yukon XL 1500,2008-2011 GMC Yukon XL 2500,2007 Cadillac Escalade,2007 Cadillac Escalade ESV,2007 Cadillac Escalade EXT,2007 Chevrolet Avalanche,2007 Chevrolet Silverado 1500 LT Submodel,2007 Chevrolet Silverado 1500 LTZ Submodel,2007 Chevrolet Silverado 1500 WT Submodel,2007 Chevrolet Silverado 2500 HD LT Submodel,2007 Chevrolet Silverado 2500 HD LTZ Submodel,2007 Chevrolet Silverado 2500 HD WT Submodel,2007 Chevrolet Silverado 3500 HD,2007 Chevrolet Suburban 1500,2007 Chevrolet Suburban 2500,2007 Chevrolet Tahoe,2007 GMC Sierra 1500 Denali Submodel,2007 GMC Sierra 1500 SLE Submodel,2007 GMC Sierra 1500 SLT Submodel,2007 GMC Sierra 1500 WT Submodel,2007 GMC Sierra 2500 HD SLE Submodel,2007 GMC Sierra 2500 HD SLT Submodel,2007 GMC Sierra 2500 HD WT Submodel,2007 GMC Sierra 3500 HD,2007 GMC Yukon,2007 GMC Yukon XL 1500,2007 GMC Yukon XL 2500.

User questions & answers

Question:	Does this item have the red arrows when making a turn
Answer:	I am sorry but I do not know
Question:	does this compatible to chevy tahoe
Answer:	This belt fit my Black & Decker band saw 9411 type 1 perfectly.
Question:	Does these mirrors fold in
Answer:	Yes same material and strength.
Question:	Does this mirror fold in to the door when the fold button is pushed
Answer:	We are very sorry, but we have not such belts.

• 【Wide Adaptation】Our ranger mirrors specially designed compatible with 2017-2021 Polaris Ranger XP 1000, 2020-2021 Ranger 1000, 2013-2021 Ranger XP 900, 2015-2021 Ranger Midsize, Ranger Full Size 570 2015, Ranger XP 570 2016, General, Brutus,Can Am Defender and Can Am Maverick Trail/ Sport ALL.NOTICE:WILL NOT FIT ON ROUND TUBE ROLL BAR.
• 【Break Away Feature】Combines maximum adjustability and a "break away" angle, these general mirrors ideal for outdoor adventure, allow the side mirrors to fold in, without causing damage.
• 【Large Adjustable Angle】These ranger side mirrors have 2 adjustable places allow you mount the mirrors high/low and forward/back for desired visual angel. It can be adjusted 360 degrees in the vertical direction, 280 degrees in the horizontal direction.
• 【Small Convex Mirror】The small convex mirror maximize your view with wide angle in the UTV. Helps you to forecast the next surroundings when passing, changing lanes or parking and to keep you in control of your environment.
• 【Shatter Resistent Glass】Our can am defender mirrors have explosion-proot membrane, which prevents broken glass from hurting people. Easy to install, just simply tightened the screws.Sturdy and no vibration.

User questions & answers

Question:	Does this fit on a 2020 Polaris General
Answer:	Yes, these side mirrors will fit 2020 Polaris General 4 1000.
Question:	Will these fit a 19 can am with soft doors
Answer:	No, these side mirrors will not fit 19 can am with soft doors
Question:	Will these fit a 2021 ranger xp 1000 eps crew with the stock mesh doors
Answer:	No, these side mirrors will not fit ranger xp 1000 eps crew with the stock mesh doors
Question:	Will these mirrors work with 2021 polaris ranger 1000 xp crew doors? either soft or hard doors
Answer:	No. These ranger side mirrors do not compatible with 2021 polaris ranger 1000 xp crew with doors

Product features

Fitment:

Product description

Raise and extend your mirrors to a position that works for you

Made from aircraft-quality aluminum

These extensions are available in brilliant chrome or smooth black

Right- or left-handed threads

Universal: 10 mm 1-3/8 in. rise

1-5/8 in. extension

• Raise and extend your mirrors to a position that works for you
• Made from aircraft-quality aluminum
• These extensions are available in brilliant chrome or smooth black
• Right- or left-handed threads
• Universal: 10 mm 1-3/8 in. rise

User questions & answers

Question:	there is no mention of the threads of these bolts. are they both standard threaded.?? the 29-211034 have one right thread, and one left thread bolts
Answer:	These are right-hand threaded.

• PACKAGE: Set of Two Mirrors ( Passenger And Drive Side ) High Impact ABS Housing with Shatter-Proof Tempered Glass; Includes All Clamps & Hardware to fit 1-5/8 inch thru 2 inch Round Tubing;
• FIT: Refer to Amazon Parts Finder to see if this fits your vehicle, fits almost all UTV's available - May NOT Fit Some Polaris RANGER;
• LARGER WIDER VISION: 7.9inch x 4.2inch(☆Other suppliers' size usually only 7.3" x 3.7"☆);
• BEST VIEWING ANGLE DESIGN: Embedded with a ball universal joint, easy to adjust up & down( ☆☆☆Just undo Allen head bolt, then adjust to desired position and lock down in that slot☆☆☆) or sideways for the desired visual angle, Break away feature;
• WARRANTY - You are very important to us and we value our customers. If you found the product not fit/damaged/defective , just contact us and you'll be taken cared of by our excellent customer service and you are also protected by our replacement/money back guarantee.

User questions & answers

Question:	will the spauto morrors fit a Can Am Defender
Answer:	Hi friend, thanks for your question, you can download the software at this link: https://amcap.en.softonic.com/. If you can't download it, please feel free to contact us. We will provide you with further help.
Question:	will they fit a 610 mule
Answer:	Hi friend, thanks for your questions. Yes, good for young beginner 6-8 yr old to practice taking pictures. Please read the user manual carefully before using!
Question:	Didn't receive any of mounting hardware. Need to send needed parts where are the needed hardware for mounting
Answer:	There appears to be some compatible batteries available on Amazon. It’s a 3.7V 800mAh Li-ion NP-40 battery.
Question:	Do you make an adapter or different clamp? Got these as a gift. My roll bars are only
Answer:	Yes I use it with a tripod and works perfect. And the included mike installs easily too!

Product features

1. Adjust Up & Down

Loosen the allen bolt so you can rotate the mount to level the mirrors, then adjust to desired position and lock down in that slot.

2.Fixed Installation

Mount them to the cage using the included bracket and rubber pads. Have to put the rubber around the roll cage before you place the bracket over the bars.The set comes with 2 different size brackets(1.75'' and 2") and rubber pads, choose right size by your roll bar.

3. Finished

Easily get out of some troubles (rocks, hollow, debris...) while reversing.Just what you needed to complete your off-road project. They do also fold in easy enough when they hit a bush or something, as to not break them off. Great field of view.

Wide Application:

Fits Any UTV with 1.75" or 2" round tube roll cage.

Polaris Rangers (2009-2014, except 2013-14 XP 900)

Polaris RZR, all year models

Bob Cat UTV's

Turbo XP 1000 RZR S 900 Can Am X3 and Maverick Honda Pioneer Yamaha Rhino and YXZ 1000.

They also fit Kawasaki Mule and Teryx models.

No Fit:

Does Not Fit XP900 / Polaris Rangers 2015 and up / Honda Pioneer 1000 & 700 / 2017 Yamaha viking / Teryx4

Package List:

2 x Side View Mirrors (Left & Right)

2 x Set Mounting Clamps (1.75" & 2")

4 x Rubber Pads

4 x Mounting Screws

SPAUTO prides itself on delivering the highest quality products to our customers.