12 best parts washer solvent

Product description

Amrep R19935 Zep Prof Parts Washer Solvent With Citru

• Fortified with citrus for added cleaning power
• Highly effective parts cleaner with pleasant citrus fragrance
• Non-Chlorinated

User questions & answers

Question:	How strong is the smell of this solvent
Answer:	The blow off valve is adjustable. So the spring pressure is variable.
Question:	Is this safe to use on anodized aluminum and plastic? I am looking for something to clean my firearms with in a parts washer
Answer:	This is the most recent version, however it is only a 38mm body height.
Question:	What is the dilution ratio for this product
Answer:	It comes with an adapter that can mount into 1.5" internal diameter silicone or rubber piping secured with a hose clamp. You will need to buy a separate adapter for a weld on setup. I recommend reading the manufacturers data sheet if you want to fabricate a weld on solution.
Question:	It’s powder or liquid
Answer:	Never had the rzr that far under water.

Product description

Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550)For submerged use in parts washers using aqueous solutions or UL-listed solvents. Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Features: Completely submersible Rated for continuous duty 1/4" MNPT discharge Thermal overload protection 1/2" MNPT Master Builders conduit fitting 6´ power cord without plug Nylon pump head Double lip Viton shaft seal Stainless steel motor shaftLittle Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Specifications: Horsepower: 1/40 Flow: 300GPH @ 1' Cord Length: 6' Shut Off: 12. 2' Voltage: 115 Hertz: 60 Amps: . 8 Watts: 47 Weight: 4. 5 lbs. Height: 5. 55" Width: 2. 9" Length: 5. 4"

From the Manufacturer

Little Giant pump for submerged use in parts washers using aqueous solutions or UL-listed solvents. Includes 6-Feet cord.

• 1/40 horsepower
• 300 GPH @ 1 Feet rise to 12. 2 Feet max
• 115 VAC, 60 Hz single phase
• 1/4-Inch MNPT discharge and 1/2-Inch MNPT Master Builders conduit fitting
• Completely submersible

User questions & answers

Question:	what options are there for mounting this unit? bolt/screw holes in the bottom or back? zip tip to something? included mounting bracket? thanks
Answer:	It’s not really strong smelling, but it’s flammable.It should only be used in a parts washer designed for a a flammable solvent.
Question:	how cold of solutions can the pump operate at
Answer:	It shouldn’t be used in a cheep parts washer that requires a water based solvent as it is very flammable.
Question:	Can this be used in a parts washer using diesel for the cleaner
Answer:	we are using st right no dilution and it took 15 gallons to fill our tank
Question:	I purchaed parts washer from TSC and put Superior Products "Brake Parts Cleaner" the pump practically melted. Does anyone if this pump will hold up
Answer:	HI, This is a liquid. Thanks

Product description

Cleaning solvent instantly removes grease, oil, dirt, and other contaminants.

• Cleaning solvent
• Instantly removes grease, oil, dirt, and other contaminants
• For use on all metal parts, most plastics, and painted surfaces

User questions & answers

Question:	Can it clean gun parts
Answer:	I fabricated my on custom bracket to hold my pump so I utilized the features on the pump housing to hold it to my bracket. It was a combination of taped holes and zip ties. Hope that helps and good luck with yours.
Question:	is this product legal in california
Answer:	My application of this pump is at ambient temperature. I do not know how cold of a solution you can use.
Question:	Is the CRC corrosive
Answer:	I used half diesel an half parts washer fuild works good for me.
Question:	Can you uas on aluminum
Answer:	This pump is ment to use only with aquas solutions. Not with petrolume base degreasers. The plastic which it is made will melt in them

Product description

A powerful all-purpose cleaner and degreaser that provides a safer alternative to toxic cleaners, bleaches and solvents. The trusted formula is nontoxic, non-abrasive and non-corrosive. Safe for all washable surfaces, Simple Green can be used to remove heavy dirt, grease, food residue and stains from any washable surface including countertops, sinks, tile, carpet, flooring, upholstery and more. The cost-effective concentrate can be used manually or in cleaning equipment such as such as floor scrubbers, dip tanks, carpet extractors, pressure washers, parts washers, steam extractors and foamers. It easily cut through tough grease, oils, cutting fluids, built-up grime and residue on equipment, engines, machinery, vehicles and manufactured parts making it ideal for a wide range of industries including janitorial, manufacturing, MRO, food processing, mining, automotive, transportation and engineering. Application: Degreaser/Cleaner; Applicable Material: Carpet; Ceramics; Cement/Concrete; Enamel; Fabric; Fiberglass; Laminates; Metal; Plastic; Upholstery; Chemical Compound: Water based non-ionic surfactant; Dirt Types: Grease; Grime; Lubricants; Oil-Based Soil.

• SimpleGreen100%
• Imported
• Orally nontoxic and readily biodegradable formula.
• Trusted non-flammable, non-abrasive and non-corrosive cleaner is a safer alternative to caustic cleaners and solvents.
• Versatile formula can be used to clean and degrease all washable surfaces.
• Cost-effective concentrate can be used manually or with cleaning equipment.
• VOC compliant and exempt from OSHA and EPA special handling and personal protection requirements for hazardous materials.

User questions & answers

Question:	Can you use this on kitchen cabinets
Answer:	A lot of elbow grease needed. I was unable to even get dirt off my driveway. I was disappointed with this product.
Question:	How to dispense this
Answer:	Did little to nothing on my concrete. I have unsealed concrete that has lots of vehicle traffic. A good high pressure washer did a same results as this product with same pressure washer. Does not do much at all.
Question:	Quiero saber si ese producto se puede utilizar para lavar trastes y ropa de cualquier tela y no la perjudica gracias
Answer:	Can't help you here Matty. I used it on my concrete apron's and sidewalks around the shop and it seemed to work great but I've never tried it against any other produce. I've always just used my pressure washer without any sort of additive and didn't notice any better or additional results to be perfectly honest with you. Would I purchase it again ?? Probably not considering the results. Hope this will help you out a little.
Question:	can this be used as a parts washer solvent
Answer:	Simple Green Oxy Solve solutions are all very similar and can be used on a variety of surfaces.
Question:	What happens if this drys on the surface of the concrete
Answer:	It should not based on my experience with using this product! Michael
Question:	Can this be used to clean oil from asphalt
Answer:	Great question! Simple Green Oxy Solve Deck and Fence Pressure Washer Concentrate is absolutely safe for Trex Composite Decking.
Question:	Will this product remove tire marks from driveway
Answer:	It depends on how much the previous stain penetrated the wood and how vigorous you are with your cleaning of the deck! Experiment with a little section and you'll see for yourself! Michael
Question:	Does this stuff really work? I have greese or muck markings on my gutters. Like stains. I heard this removes it, but can someone who has used it verif
Answer:	At Simple Green we have had some great feedback from consumers that have used the product on brick houses.

Product features

Simple Green Industrial Cleaner/Degreaser

A powerful all-purpose cleaner and degreaser that provides a safer alternative to toxic cleaners, bleaches & solvents.Safe for all washable surfaces, Simple Green can be used to remove heavy dirt, grease, food residue and stains from any washable surface including countertops, sinks, tile, carpet, flooring, upholstery and more. The cost-effective concentrate can be used manually or in cleaning equipment such as such as floor scrubbers, dip tanks, carpet extractors, pressure washers, parts washers, steam extractors and foamers.

White Cleaner

It easily cut through tough grease, oils, cutting fluids, built-up grime and residue on equipment, engines, machinery, vehicles and manufactured parts making it ideal for a wide range of industries including janitorial, manufacturing, MRO, food processing, mining, automotive, transportation and engineering.

• Cleans, Degreases & Deodorizes
• Orally Non-Toxic Formula

Product description

Cleaner Degreaser, Water-Based, Container Size 5 Gal, Color Clear Yellowish, Removes Grease, Oil, Dirt and Grime, Standards California South Coast Air Quality Control and USDA Approved

• Concentrate
• Package Dimensions: 38.4 H x 33.0 L x 33.0 W (centimetres)
• Package Weight: 21.5 kilograms
• Country of Origin : United States

User questions & answers

Question:	Is this safe to use in a parts washer for cleaning guns
Answer:	Absolutely it’s a mineral spirit-based solvent, it works well and will clean just about anything but it will leave it oily film after it’s cleaned.
Question:	How should I dispose of the solution after use
Answer:	Yes I order it here in California
Question:	Is this a powder or liquid
Answer:	No not at all but go to Napa and get real solvent for better results
Question:	Can i use this with a foam canon to clean chassis trucks ? (Semi and dump trucks
Answer:	Yes you can use on aluminum! Great stuff😁

Product description

Dyna 143 is specifically designed for use in Zep Parts Washer, Dyna Clean, Dyna Brute FB, Super Brute FB, Zep Brake Buggy and Dyna Mate. Quickly dissolves and flushes away grease and dirt. May be used with a brush or as a dip. Composed of a blend of quality, odorless solvents. Safe to use on all metals. Excellent light-duty cleaner for fuel pumps, carburetors, filters, master cylinders, valve covers, rocker arms, and all engine parts. Ready-to-use. Relatively slow evaporation rate reduces losses to atmosphere. Leaves light oil film on parts to protect against rust and corrosion. Its elevated flash point provides both an added degree of safety in use and storage, and removes the used product from the Hazardous Wastes List - thereby eliminating the headaches and expense involved with disposal.

• Highly-refined, odorless solvents quickly dissolve and flush away grease, oil and other soil
• Low evaporation rate and vapor pressure assure minimal evaporative loss and employee exposure
• The higher flash point of Zep Dyna 143° (143°F) as compared to mineral spirits (107°F), reduces the flammability hazards of solvent use in the shop area and storeroom
• When used in a filtered Zep parts washer, such as the Zep Dyna Clean, the solvent is continuously recycled, while any particulates and oils are trapped in filters for disposal
• In addition to use in parts washers, it may be used for general degreasing anywhere a solvent cleaner is needed

• FLOW-THRU PARTS BRUSH WITH TUBE+180 DEGREE ROATING NOZZLE: Designed for circulating washing.Heavy-Duty grooved handle. 28-Inch (71-Centimeters) Long Tube.The flexible metal nozzle is ideally used to guide the cleaning agent to the parts which need to be cleaned
• SELF-LOCKING FUSE+REMOVABLE BASKET:The lid will be automatically capped when the washing machine's operating temperature exceeds the safe limit, safty ensure in case of fire.Equipped with parts cleaning basket, ideally worked for small parts storage.
• CLEANING FLUID CAN BE RECYCLED: The cleaning fluid through the pump from the pipe, cleaning solvent can be recycled through the pump, pump has a filter, can filter the use of impurities in the cleaning fluid
• HIGH FLOW PUMP: 5-1/4GPM high flow parts washers pump,ability to clean all types of parts efficiently and quickly,such as screws, bearings, gaskets, suitable for all kinds of working environment，such as auto repair shop,the construction site
• STURDY STEEL+ANTI-RUST COATING：Redsun parts washer cleaner were made of sturdy steel,the powder coating can resist rust and corrosion.However, we do not recommend the use of volatile solvents such as gasoline

User questions & answers

Question:	What cleaning solution do you recommend
Answer:	Just talked to a guy I worked with and he said it would probably not the best thing and he has guns. He said it probably won't clean the powder residue so he's thinking there's probably something better to use than that. But maybe you want to give it a try if not you can use it for a lot of other stuff we use it in our machine shop for cleaning all kinds of tools and stuff and we got guys here that even use it for stains on clothes. Maybe buy a small spray bottle to try before you go for the 5 gallons.
Question:	Our product was damaged, how do we obtain a replacement shelf
Answer:	Please read the specs. This cleaner is water based & biodegradable. Safe to use even in your home & kitchen. You should be able to pour the solution down any drain in your home or business unless it is so heavily contaminated from contaminants that you have cleaned off the items that you are cleaning with it.
Question:	Where is this made, what country
Answer:	Hello, The oil eater is a liquid fluid. Usually, the recommended mixture is 20 parts of water to 1 part of oil eater to get a good cleaning solution.
Question:	How well packed is this item? is it going to arrive damaged? i have received two chinese washers shipped from grizzly and both have arrived damaged
Answer:	Hello Sir, Cleaning Chassis trucks is a excellent application for oil eaters, you want to apply the oil eaters to the area you want to clean scrub and let is sit for few minutes then rinse off.

Product features

HEAT-RESISTANT LID

The lid is equipped with a fusible link and automatically closes when the washing machine's operating temperature exceeds the safe limit. It ensures safety in case of fire.

FLOW-THROUGH BRUSH

The flow-through brush is ideal for removing grease and dirt off the part. It is also equipped with a flexible spigot to direct solvent flow over parts.

HIGH FLOW PUMP

Enclosed electric submersible pump re-circulates fluid for quick parts washing. With the 5-1/4GPM high flow pump, the parts washer is able to clean all types of heavy-duty parts.

Used in a garage to clean all sizes of car parts

Clean grease stains off tools in the workshop

Product description

The Torin BIG RED T10035 steel cabinet parts washer has a compact size with a 3.5 gallon fluid reservoir capacity and a 325 gallon per hour pump. The 110V electric pump recycles at 1/2 gallon per minute. The super handy bench top washer fits almost anywhere and is great for small parts cleaning jobs, including wheel bearings, gears, and carburetors. Not for use with flammable or combustible solvents such as mineral spirits and biodegradable cleaners. The cabinet has a durable, steel construction and is UL/CSA approved. The steel work basin is 18" wide by 13.5" deep and 9" high. Features a hinged, fusible link lid closes when not in use and helps prevent accidental fire for added safety. Includes a 1 year limited manufacturer warranty.

• Compact, bench top steel cabinet parts washer great for small parts cleaning jobs including wheel bearings, gears, and carburetors
• Parts washer is lightweight that can be moved easily to accommodate your cleaning needs; Features a 3.5 gallon fluid reservoir capacity and a 110V electric pump which recycles liquid at 1/2 gallon per minute
• Durable, steel construction parts washer is lightweight that can be moved easily to accommodate your cleaning needs; Work basin dimensions are 18" wide x 13.5" deep x 9" high
• Not for use with flammable or combustible solvents such as mineral spirits and biodegradable cleaners
• Features a hinged, fusible link lid closes when not in use and helps prevent accidental fire for added safety; Includes a 1 year limited manufacturer warranty

User questions & answers

Question:	Can i use a psc1000 cleaner that i get from tractor suppy
Answer:	Water based solution.
Question:	Can I use a citrus based cleaning solvent like Zep Citrus Cleaner De-greaser
Answer:	Call the shipper
Question:	can you use solvent based cleaners? i have some already. plus i dont want it to freeze. thanks
Answer:	Made in China, a professional factory.
Question:	Can I use petrol, kerosene for cleaning of parts, if not why
Answer:	We used a thickened foam that would not have been damaged if the transport had not been particularly violent.

Product features

Torin BIG RED Portable Steel Cabinet Parts Washer with 110V Electric Pump, 3.5 Gallon Capacity

• SPECIFICATIONS: Our portable parts washer is designed to easily fit your favorite 5 Gallon Bucket. It's perfect for degreasing small parts and tools and features a hard bristle brush for your toughest jobs and a unique channel drainage system to easily catch waste material.
• PORTABLE: This parts washer is extremely lightweight and can be easily packed up and moved from job site to job site or from your shop to your garage. The pump sits at the base of the 5 Gallon Bucket and makes cleaning your parts and tools a breeze!
• VERSATILE: This parts washer is safe for use with any non-corrosive, water based cleaning solution, so you can get the job done now!
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES Portable Parts Washer, simply contact customer service for troubleshooting help, parts, replacement, or refund.
• ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.

User questions & answers

Question:	whats the best degreaser for bearing grease
Answer:	Can’t see why not. PSC1000 cleaner is a petroleum distillate. The Torin T10035 can be used with mineral spirits, which is a petroleum distillate.
Question:	Is there a power on and off switch anywhere on the unit
Answer:	Based on all I have read, the Citrus Cleaner and similar cleaners are actually recommended for this Washer.
Question:	What voltage is needed to operate? 220v or 110v
Answer:	I use solvent in mine with no problems. I hate the water based cleaners, as they do NOT work well, and they will turn to mold if not stirred every day.
Question:	Is this made in China
Answer:	I am not an authority about this but I will just say I have used Kerosene for cleaning parts with no problem. But please remember that Kerosene is flammable and can be dangerous especially if you are washing parts in the house or possibly basement. I have a saw sharpening system in my basement and I use the Torin to clean circular saws.

Product features

Easy To Use

Our portable parts washer is extremely lightweight, so it can be easily packed up and moved from job site to job site or from your shop to your garage.Safe for use with any non-corrosive, water based cleaning solution, this parts washer will help you degrease small parts and tools quickly and easily!

Quality You Need

This portable parts washer fits in the top of a 5 Gallon Bucket and features a hard bristle brush for your toughest jobs. Thanks to its unique channel drainage system, it will easily catch waste material to make cleanup a breeze.

Product description

EcoGen Tool & Parts Cleaner removes dirt, oil and grime from parts, tools and equipment without the harmful chemicals typically found in parts washer solvents. This specially formulated cleaning solution first works to reduce surface tension so more thorough contact with the soiled surface can be achieved. Once EcoGen reaches the cleaning surface, the high volume of micro-cleaning particles in the solution work to penetrate, encapsulate and lift soils into suspension away from the cleaning surface. This safer, more targeted cleaning action provides a better alternative for parts cleaning and reduces risk to workers and the environment. HOW TO USE: Product is concentrated. Dilute with 3 parts water. Soak tools or parts in solution until clean. Agitate difficult soils with scrub brush, then rinse with water. Dwell time, increased temperature and agitation will aid the cleaning process. *May discolor untreated aluminum if product is left on surface.

• 5 gallon bucket of professional strength, water-based parts cleaning solution provides a safe and effective alternative to harsh parts washer solvents
• Specialized surfactant formula penetrates and lifts oil, dirt and grime from shop tools, parts and equipment without caustic, burning chemicals
• Gentle on hands, no irritating fumes and no special handling requirements
• Environment safe formula is biodegradable, non-toxic, non-caustic and non-flammable
• For use in water-based parts washing systems or for general parts cleaning
• Concentrated formula with a dilution ratio of 1: 3
• Made in the USA

User questions & answers

Question:	How much will this make its says 1 to 3 is it 1 part water or 3 parts water
Answer:	Non diluted simple green works pretty good. This pump only last me through the weekend though..
Question:	Does this leave a residue? I would like to use it for paint prep
Answer:	nope, just have to unplug it.
Question:	Does it foam up at high pressure
Answer:	110 V
Question:	Is this safe to use on guns
Answer:	Yes, my unit was.

Product features

EcoGen Tool & Parts Cleaner

EcoGen Tool and Parts Cleaner is an aqueous cleaning solution that safely cleans dirty, grimy parts and tools without harsh chemicals. Safer chemistry doesn't mean lower performance. EcoGen's specially blended surfactant formula provides superior cleaning action with micro-sized cleaning particles that efficiently penetrate, encapsulate and lift soils away from the cleaning surface.

User Friendly Formula

EcoGen parts cleaner is safe for the user with no harsh, irritating fumes or skin irritation. EcoGen’s clean air formula is free of hazardous air pollutants (HAPs) and ozone depleting compounds (SCAQMD). Product is non-flammable, non-caustic and unscented.

Product description

EcoGen Tool & Parts Cleaner removes dirt, oil and grime from parts, tools and equipment without the harmful chemicals typically found in parts washer solvents. This specially formulated cleaning solution first works to reduce surface tension so more thorough contact with the soiled surface can be achieved. Once EcoGen reaches the cleaning surface, the high volume of micro-cleaning particles in the solution work to penetrate, encapsulate and lift soils into suspension away from the cleaning surface. This safer, more targeted cleaning action provides a better alternative for parts cleaning and reduces risk to workers and the environment. HOW TO USE: Product is concentrated. Dilute with 3 parts water. Soak tools or parts in solution until clean. Agitate difficult soils with scrub brush, then rinse with water. Dwell time, increased temperature and agitation will aid the cleaning process. *May discolor untreated aluminum if product is left on surface.

• 1-gallon container (4-pack) of professional strength, water-based parts cleaning solution provides a safe and effective alternative to harsh parts washer solvents
• Specialized surfactant formula penetrates and lifts oil, dirt and grime from shop tools, parts and equipment without caustic, burning chemicals
• Gentle on hands, no irritating fumes and no special handling requirements
• Environment safe formula is biodegradable, non-toxic, non-caustic and non-flammable
• For use in water-based parts washing systems or for general parts cleaning
• Concentrated formula with a dilution ratio of 1: 3
• Made in the USA

User questions & answers

Question:	Will this work to clean paint sprayers
Answer:	Hi not sure if it will leave residual for painting. doesn't leave anything on hands however not the best parts cleaner for greasy stuff hope this helps
Question:	can you use on carburetor
Answer:	I guess it depends on how high. I use it in a regular shop parts washer and there's no foam.
Question:	Can you use this to clean gun parts
Answer:	I would not use on firearms. It would be like washing your gun in orange juice

Product features

EcoGen Tool & Parts Cleaner

EcoGen Tool and Parts Cleaner is an aqueous cleaning solution that safely cleans dirty, grimy parts and tools without harsh chemicals. Safer chemistry doesn't mean lower performance. EcoGen's specially blended surfactant formula provides superior cleaning action with micro-sized cleaning particles that efficiently penetrate, encapsulate and lift soils away from the cleaning surface.

User Friendly Formula

EcoGen parts cleaner is safe for the user with no harsh, irritating fumes or skin irritation. EcoGen’s clean air formula is free of hazardous air pollutants (HAPs) and ozone depleting compounds (SCAQMD). Product is non-flammable, non-caustic and unscented.

Product description

The cleaning power of bioremediation with a portable and storable design. The BenchtopPRO is a self-contained, water-based, bioremediating parts washer that uses no harmful solvents. The BenchtopPRO uses a water-based degreasing solution to clean parts, and naturally-occurring microorganisms break down and convert oil, grease, and varnish into water and CO2. The process of bioremediation makes the BenchtopPRO a self-cleaning system, and the degreasing solution can be used over and over again. Applications: small engine repairs, household equipment, lawnmowers, chainsaws, outdoor equipment, auto, motorcycle, and motorsports maintenance and repairs, snowmobile service, bike repair, marine maintenance.

• The cleaning power of bioremediation with a portable and storable design
• Self-contained, water-based, bioremediating parts washer that uses no harmful solvents
• Uses a water-based degreasing solution to clean parts, and naturally-occurring microorganisms break down and convert oil, grease, and varnish into water and CO2
• Bioremediation makes the BenchtopPRO a self-cleaning system
• Degreasing solution can be used over and over again

User questions & answers

Question:	Where can i buy the bt-5 solution? it says it’s currently unavailable on amazon and i can’t find anyone else selling it
Answer:	it would depend on the kind of paint your using. Probably will only work with latex paint. A lotof paint might contaminate the cleaner pretty rapidly as well.
Question:	Does this product come with the fluid and the micropro packs
Answer:	Yes, but carb cleaner from auto parts store works much better.
Question:	What are the dimensions of the washing pan
Answer:	I dont see why not, it is combined with water so drying off would be critical. I might clean with this and wipe down with wd 40, or spray with wd 40 then blow off with compressed air.
Question:	Where can you buy the crc micropro packs
Answer:	3 parts water

Product features

CRC SmartWasher BenchtopPRO bioremediating parts washer

The BenchtopPRO is a self-contained, water-based, bioremediating parts washer that uses no harmful solvents. The BenchtopPRO uses a water-based degreasing solution to clean parts, and naturally-occurring microorganisms break down and convert oil, grease, and carbon-based contaminants into water and CO2. The process of bioremediation makes the BenchtopPRO a self-cleaning system, and the degreasing solution can be used over and over again.

Home & Professional Applications:

Flow-through brush

A powerful recirculating pump delivers ample cleaning solution to the valve-controlled flow-through brush. Tough, long-lasting bristles let you easily scrub away dirt, grease, and oil.

Built-in drying tray

The lid of the BenchtopPRO opens to become a convenient parts drying tray. The degreasing solution drains off your parts and back into the recirculating system.

Easy to store

Just clean, close, and store. There’s no need to drain the degreasing solution. Store the BenchtopPRO upright or flat. The degreasing solution stays inside, ready for your next use.