12 best ram lawn mowers

Product description

Easily load your riding lawnmower, snow blower, wood chipper, or ATV into your shed or garage with these aluminum shed ramps. Featuring a 750 lb. per axle weight capacity and weighing just 4 lbs. each, these lightweight ramps are easy to set up and take down and can be hung on the wall for convenient storage. To permanently mount these ramps, simply bolt them to the floor of your shed using the pre-drilled 1/2" holes. Mounting hardware is not included.These lightweight ramps are easy to pick up and move as needed, and can be hung on a shed wall for easy storage

• Easily load a riding lawnmower, snow blower, or ATV into a shed or garage
• 3.5" rung spacing for smaller wheels with a serrated texture for added traction
• Features a full width 4" L attaching lip with pre-drilled holes for optional permanent mounting
• Lightweight aluminum with a 750 lb. per axle weight capacity
• Sold in pairs; each ramp measures 36" L x 8" W

User questions & answers

Question:	Would this ramp work well for a lawnmower loading into a pickup truck
Answer:	The ones I have are 36" long the would never work for a pick up truck... need something much longer... also they would be too narrow to risk a riding mower at the height of a pick up bed.
Question:	Would this work with a acura mdx suv
Answer:	If you get the 36” ones the angle would be too great to be of any use. Anything higher than about 16” off ground would create a load up angle too great to be of and use. Best for a garden shed not more than 9” high....
Question:	do you have to use pins to hold in place
Answer:	I do not. I have a 10x12 wooden shed that I keep my JDZTR225 in. I do not use pins to get it in and out. It could very easily be done if needed. Drill holes for the ramp spacing you want, keeping in mind the holes will be in the center of them ramps. Insert a metal sleeve that will accommodate what ever diameter bolt you want to use, and pound the sleeve flush with your surface. Just a tip, whatever length you think you need, buy a longer set. My shed sits a foot or so above the ground, and it can be a little dicey sometimes getting my mower in to the shed with these.
Question:	I have a 26" mbt snow blower. i put it up on a 4 x 8 utility trailer, the end of the trailer is appropriate 14" to the pavement. will these ramps wor
Answer:	It should work but you need to keep in mind the distance of the front of the snow blower in relation to the front wheels. In other words, will the front of the blower hit the ramps before the wheels will?

Product features

Guardian Dual Runner Shed Ramps

• Easily load a riding lawnmower, snow blower, or ATV into a shed or garage
• 3-1/2" rung spacing for smaller wheels with a serrated texture for added traction
• Features a full width 4" L attaching lip with pre-drilled holes for optional permanent mounting
• Manufactured from lightweight aluminum
• 750 lb. per axle weight capacity
• Sold in pairs

Accommodates Smaller Wheels

Narrow 3.5" serrated rung surface easily accommodates smaller wheels on snowblowers and smaller equipment.

Sturdy, Full-Width Lip

Each ramp features a full-width attaching lip for maximum stability and security while loading and unloading.

High Capacity Ramps

These ramps feature a 750 lb. per axle weight capacity and can accommodate even the heaviest lawn and garden equipment.

Guardian Shed Ramps

Safely and easily load riding mowers, lawn tractors, snow blowers and other powered equipment into your shed or garage with our selection of aluminum shed ramps. Available in a wide range of styles, lengths, widths, and weight capacities, it will be easy to find the perfect solution for your situation.

Product description

These 1,500 lb. capacity punch plate shed ramps make it easy to safely load lawn mowers, snow blowers, and other equipment into your shed. The punch plate surface of these ramps provides excellent traction in all weather conditions, reducing the risk of injuries and damaged equipment. These lightweight ramps are easy to pick up and move as needed, and can be hung on a shed wall for easy storage. For a more permanent solution, they can be attached to the floor of a shed or garage by installing screws into the pre-drilled holes (hardware not included).

• Pair of aluminum shed ramps for loading lawn equipment into sheds, barns, and garages
• Punch plate surface for superior traction in all weather conditions
• 4" solid plate lip features pre-drilled holes for permanent mounting
• Manufactured from lightweight aluminum with a 1,500 lb. weight capacity (750 lbs. each)
• Each ramp measures 3’ L x 12" W

User questions & answers

Question:	How much of a rise are these good for? My shed floor is about 8 inches above the ground
Answer:	It depends on the length of the ramps. Mine are 3 feet long and my shed floor is about 6 inches above the ground and they work great. I hope that helps.
Question:	What kind of screws would be used to attach this to the shed
Answer:	I didn't "attach" mine. I drilled 7/16 holes in the shed floor and use 3 inch,stainless steel bolts to hold the ramps in place. When done, I remove the ramps send out the bolts back in the holes so I can find them the next time. Worked out well.

Product features

Guardian Aluminum Dual Runner Shed Ramps with Punch Plate Surface

• Pair of aluminum shed ramps for loading lawn equipment into sheds, barns, and garages
• Punch plate surface for superior traction in all weather conditions
• 4” solid plate lip features pre-drilled holes for permanent mounting
• Manufactured from lightweight aluminum
• 1,500 lb. weight capacity (750 lbs. each)

Lightweight Construction

All-aluminum construction provides an impressive 1,500 lb. total weight capacity and ensures that these ramps are light enough to move as needed.

High-Traction Surface

A rugged punch plate surface provides superior traction, even in wet or muddy conditions.

Easy Mounting

Pre-drilled holes at the lip are ideal for permanent mounting (hardware not included).

Guardian Shed Ramps

Safely and easily load riding mowers, lawn tractors, snow blowers and other powered equipment into your shed or garage with our selection of aluminum shed ramps. Available in a wide range of styles, lengths, widths, and weight capacities, it will be easy to find the perfect solution for your situation.

Product description

The TRANSITIONS Modular Entry Ramp, a free-standing, all-aluminum threshold ramp, creates a smooth, sturdy, and seam‐free surface for wheelchair, scooter, walker, and cane users when navigating doorways, sliding glass doors, and raised landings throughout the home. It is lightweight and can easily be transported from one place to the next to eliminate potential trip hazards.

• ENTRY RAMP: This 6" tall modular entry ramp creates a smooth, sturdy surface for doorways, made of high strength lightweight aluminum with a slip-resistant surface. Size: 32.75" x 34" x 6" Usable height range: 5.75" - 6.25" Weight: 20 lbs. Capacity: 700 lbs.
• EASY INSTALLATION: Add & remove interchangeable extensions as needed to accommodate thresholds from .75” to 6.25”. A pivoting flap attaches to the top of the ramp for .25” of additional adjustability.
• ACCESS RAMPS FOR HOMES & CARS: Make your living space easier & safer with threshold ramps for doors that are a little too high, semi-permanent ramps & portable ramps for vehicles & temporary needs.
• INCREASE MOBILITY & SECURITY: Mobility solutions help you or a loved one regain confidence, freedom, & the ability to safely & independently access home or vehicle with less stress & more security.
• ACCESS ANYWHERE: Our products offer an array of temporary, portable & permanent mobility solutions from toilet lifts to ramps to homecare products to walker, scooter, wheelchair & crutch accessories.

User questions & answers

Question:	Can this be used to extend the low end of an 8' ramp, to reduce the angle of incline
Answer:	It depends on whether the 8' ramp is from this same manufacturer and how high the high end is. Probably best if you go to the manufacturers website and e-mail them your question.
Question:	What is the weight capacity of this ramp
Answer:	The official weight capacity listed by EZ-ACCESS is 700 lbs. Please let us know if you have any other questions by calling us on our customer service number listed in our store front. Thank you!
Question:	What is the weight limit for this ramp
Answer:	The weight capacity is 700 lbs. Please let us know if you need any additional informaiton. Our customer service phone number is listed on our Amazon store front. Thank you! USA Ramp Store, LLC
Question:	I’m wondering if you have a more narrow ramp. One that is about 28 inch wide instead of 34 inches. Or can I easily cut it
Answer:	I don't know if they have a narrower ramp. I don't think it can be easily cut since it's made out of metal.

Product features

EZ-ACCESS TRANSITIONS Modular Aluminum Entry Ramp

The TRANSITIONS Modular Entry Ramp is perfect for doorways to create a smooth, sturdy, and seam-free surface for wheelchair, scooter, walker, and cane users.

Easy to use and easy to store

It is made with high-strength aluminum that will never rust or corrode and has an extruded slip-resistant surface for superior traction.

Made of Aluminum:

Made from high-strength aluminum that will not rust or corrode and can support up to 700 pounds.

Slip-resistant Surface:

Features a safe, extruded slip-resistant surface for superior traction.

Adjustable Flap:

This pivoting flap attaches to the top of the ramp to provide ¼” of additional adjustability.

Pre-drilled Slots:

Holes are pre-drilled in the foot section and Adjustable Flap for anchoring. Hardware included.

• Pair of aluminum shed ramps for loading lawn equipment into sheds, barns, and garages
• Punch plate surface for superior traction in all weather conditions
• 4" solid plate lip features pre-drilled holes for permanent mounting
• Manufactured from lightweight aluminum with a 1,500 lb. weight capacity (750 lbs. each)
• Each ramp measures 4’ L x 12" W

User questions & answers

Question:	I have a 1300 pound utv. Is this really strong enough
Answer:	Yes. They are plenty strong enough.
Question:	I see the tread plate is riveted on. Any issue with the rivets popping
Answer:	I have used mine about 30 times so far and have not had any issue. I use mine for lawn tractor.
Question:	What are the ratcheting straps that came with it for
Answer:	Ratchet the ramps to the trailer to keep them from shifting
Question:	How much do these weigh
Answer:	I can’t weigh them right now. But if I had to guess I would say no more than 5 lbs each.

Product features

Guardian Punch Plate Shed Ramps

The Guardian Punch Plate Shed Ramps make it easy to safely load lawn mowers, snow blowers, and other equipment into your shed. The heavy-duty punch plate surface of these ramps provides excellent traction in all weather conditions, reducing the risk of injuries and damaged equipment. These lightweight ramps are easy to pick up and move as needed, and can be hung on a shed wall for easy storage. For a more permanent solution, they can be attached to the floor of a shed or garage by installing screws into the pre-drilled holes (hardware not included).

Supports ride-on mowers...

and lighter equipment

Pre-drilled mounting hole

Serrated feet for smooth transition

Landscaping Shed Ramps and More

Guardian Industrial Products provides industrial-quality safety equipment, cable ramps, rail systems and similar protective products to commercial businesses throughout the United States. Our landscaping shed ramps facilitate driving lawn mowers and landscaping equipment across uneven ground into storage areas or job sites.

• 【Release Transportation Work】Use a loading ramp to help your transportation job that remove the items to your pickup truck easy done and more safely.
• 【Strong Applicability】 Truck ramps are not only suitable for a wide range of motorcycles and off-road vehicles to support your favorite rides, but also large gardening tools to help your cleaning and care works. You can use it with ATV , Lawn Mower, Motorcycles, Dirt Bike and Garden Tractor, Snowblower and so on.
• 【Heavy Duty & 1,500 lbs Capacity】Constructed with HIGH QUALITY ALUMINUM ALLOY, this loading ramps are PURE MANUAL WELDED which are both sturdy and durable with their 1,500 lbs capacity for pair use( 750lbs for single use). With LOAD STRAPS for fixed ramps, ensuring that folding loading ramp does not collapse and slipping during transport.
• 【Protective Design】 Soft tipped design reduces abrasion between your ride and the atv ramps. There are 3 caps at the bottom of the truck ramps, which will keep it from slipping and makes much safer and more stable when you load.
• 【Foldable & Easy Storage】Folding loading ramps can be folded into a compact size when not in use, convenient for storage and carrying. Expanded Size: 89" L x 11.8" W Folded Size: 45.3"L x 11.8" W

User questions & answers

Question:	Will a lawn mower bottom out gone up the ramp
Answer:	It depends on the clearance of the mower and the height of your trailer. Mine does not
Question:	Anyone notice the tack welds all cracked after 1 year of light use
Answer:	We've had them less than a year. So far so good. Haven't noticed any cracks or other defects. They work fine.
Question:	are these avalable in 6ft
Answer:	Dont Know
Question:	Who does your photoshopping? I'd like to avoid hiring them by accident
Answer:	I don't do photoshopping

Product features

Foldable Ramps

For compact storage. Carry easily.

Extra Center Bar

For better load bearing capacity.

Reverse Barrier Design

Reducing the risk of the car going backwards.

Rubber Tipped Fingers

Provide extra security.

• ✪ 【ALUMINUM LOADING RAMP--LIGHTWEIGHT&STURDY】：Portable and lightweight ATV loading ramp built from high-strength aluminum,lightweight, durable, weather resistant。The ramp weight is only 15.5lbs(each），This weight is easy to use without assistance。These ramps have a load capacity of 750 pounds each, combined rating 1500 LBS.Before use, please confirm the weight of the machine you will carry, please do not exceed the max capacity .
• ✪【FOLDABLE LOADING RAMPS--FOLDABLE & NO ASSEMBLY REQUIRED】：The ramps are easy to use,just open it and ready to use. No installation required.(Unfolded Size: 89*12”; Folded Size: 46*12”).The ramps are 46 inches when folded, will fit in most back seats for easy carry and easy storage.Easy to fold and store-easy .
• ✪【TRUCK LOADING RAMPS -- RUBBER TIPPED FINGERS&LOAD STRAPS】：These truck tailgate ramps include heavy duty load straps to keep the ramp firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling. Rubber tipped fingersprovide extra safety for your vehicle while also preventing damage to the tailgate.
• ✪【PROFESSIONAL WELDING & MATURE PRODUCTION TECHNOLOGY】：Crossbars ，heavy-duty hinges, joints are professionally welded, so the ramp can be folded and unfolded countless times without failure.The edge of ramp are nicely welded and cut with no real sharp edges.
• ✪【PERFECT LOADING AND UNLOADING】: These truck loading ramps are ideal for transferring any four-wheeled vehicle or two-wheeled vehicle to a truck trailer. A pair set suitable for ATV & UTV, lawn mower, truck, motorcycle, trailers,tiller, dirt bike and garden tractor and other smaller wheeled tools.One ramp is suitable for motorcycles, bicycles, etc.

User questions & answers

Question:	How much weight do they hold
Answer:	The capacity is 775LBS/350KGS/PC,1550LBS/700KGS/PAIR.
Question:	Can someone tell me the inside width of one of the ramps
Answer:	The  inside width of the ramp is 11 inches, the dimensions of the ramp is 89*12 inch/pc(unfolded) and 46*12 inch/pc(folded). which is suitable for most small and medium-sized tires.The loading capacity of the ramp is up to 750 lbs./pc and 1500 lbs by pair.
Question:	Can I use this item to load my golf cart
Answer:	The ramp is used for ATV & UTV, Lawn mower, Light truck, Motorcycle, Trailers,Tiller, Dirt bike,Garden tractor and other kinds of wheeled tools,make sure the total weight of golf cart and the driver is less than the maximum loading capacity (1550LBS/700KGS by pair), you can enjoy the ramp safely.
Question:	Will the ramps slip or vibrate when loading
Answer:	not as long as you have the straps strapped to the bed they won’t, my raptor 700r has a ton of torque and no issues whatsoever loading it up.

Product features

Product Information

Rubber Tipped Fingers

Anti-slip design,

provides extra security during use

Reverse Barrier Design

Reduce the risk of cars

going backwards

Safety Straps

Keep the ramps firmly

attached to the tailgate.

Foldable Ramps

No complicated joints.

just a few seconds to install.

7.5 FT Aluminum Folding Loading Ramps

The aluminum ramp is made of high-strength aluminum and can be used as an ideal solution for ATV, 4-wheel, motorcycle, mountain bike transportation, and also as an excellent lawn mower loading ramp for yard work purposes. The included safety tether strap allows you to set up the ramp safely without collapsing, thereby protecting you and your vehicle from injury. Rubber pointed fingers provide additional safety protection for your vehicle, while also preventing damage to the tailgate or trailer.

Product description

The Black Widow 48.5" Black Steel ATV Trailer ramps have a maximum 1,600-pound capacity. Includes two safety tie-down straps to prevent ramp kick-outs during loading. The mesh surface allows water and debris to filter through while providing added loading traction. Features integrated carrying handles for portability. Stores inside the trailer between uses. Made with heavy-duty steel construction, finished with a black for long lasting durability.

• Dual runner loading ramps for loading and unloading ATVs and other off-road vehicles into pickup truck beds or trailers; package includes 2 ramps
• Each ramp measures 4' 0.5" L x 11" W; 1,600 lb weight capacity
• Integrated carrying handles make it easy to transport
• Mesh surface filters debris and provides traction; rubber-coated finger-style attachment points provide sturdy grip without scratching your truck bed or trailer; 2 included safety straps secure the ramp to your vehicle
• Durable, powder-coated steel construction

User questions & answers

Question:	I'd need them to load a Four wheeler into a truck. All the comments say trailer so I wanted to check, would it work to load into a truck
Answer:	It's not the longest of its kind; depending on how high above the ground the floor of your truck is, it may be a steep slope to load your four wheeler. I would advise to gauge the angle with a stick of same length before ordering, or to order a longer item if your four wheeler is heavy. Besides that this item is well buit and sturdy, also comes with a retainer system to avoid the ramp to slip from the truck and fall down under strain. A very good item overall, but check the length with your own truck.
Question:	How do these hook to the back of your trailer? Do you need to buy some extra hardware
Answer:	The ramps rest on the back of the trailer with rubber coated fingers and come with red straps that hook to the back of the trailer To help of the ramps steady for loading and off-loading. No extra hardware is needed.
Question:	What is the weight rating per ramp? Looking to load a fully dressed Harley davidson on a trailer
Answer:	My husband uses them to load a John Deere gator tractor onto a trailer with no problem. Don't know the weight but would think it weighs more than a Harley. Hope this helps you.
Question:	how wide is each ramp
Answer:	Not sure how wide they were,I return them they were to short for my f-150 ford truck good luck sorry I couldn't help you more.

Product description

FloTool, by Hopkins Manufacturing, offers the most comprehensive and highest quality offering of fluid handling products. FloTool's success has been driven through innovative, no-mess product solutions that turn basic funnel and spouts into higher value products. Whether you're changing your oil, topping off the antifreeze, or checking all your automotive fluid levels, FloTool has the right application. No brand offers more "just-right" fluid handling products than FloTool. The Easy Lift Rider Ramps make mower maintenance easy. Their curved design allows easy roll up rather than lifting onto blocks. Structurally sound, with a stackable design, these ramps can hold up to 500 pounds.

• Makes mower maintenance easy
• Curved design allows you to roll up onto the ramps rather than lifting the mower up onto blocks
• Provides 6" of lift while holding up to 500 lbs
• Stackable for easy storage
• Holds up to 500 pounds
• Made of durable rust-proof materials
• Max capacity: 500 lbs per set

User questions & answers

Question:	Do they work on the rear wheels as well as the front. Just wondering if you can get all four wheels off the ground at the same time
Answer:	Ya I bought this EZ LIFT RIDER RAMP and used it one time - my mower - gx335 john deer - flattened these as soon as they rolled up on then. WOULD NOT RECAMEND GETTEN THESE. The ones I bought are seating under my bench wait for yard sale season. Should have save my money!!
Question:	Will these allow enough lift to be able to change the mowing blades out
Answer:	It will allow you enough room to access the blades while lying on the ground. However, when I drove my 660 lb. John Deer mower on to them one time they shattered, so I don't trust them. I do all my own mower maintenance so I invested in a MoJack mower lift instead. Much safer.
Question:	Do they come in pairs
Answer:	Thank you guys .I wanted to be sure I'd get a pair
Question:	will this set of ramps lift my rider mower up enough so I can clean the mower deck w/ a pressure washer
Answer:	I use these to raise the front-end of my JD lawn tractor; there's enough additional clearance when raised to change the blades and wash the deck. However, using a pressure washer may be risky (I use a garden hose with spray nozzle and a putty knife with a stiff blade, not the springy type). Note: be sure to block the rear wheels so the tractor doesn't move, and use eye protection (goggles) when doing anything under the mower. P.S. All maneuvers are made lying down, of course!

Product description

Pro-Lift T-5335a lawn mower lift is a 350 lbs. and it’s giving you the room and stability to work safely on lawn mowers in three easy steps Lawn mower lift that provides the ability to lift 23 inches from ground to wheel saddle to give you the maximum space to perform necessary mower maintenance. It is built with the welded solid steel construction with the four steel wheels and the positive dual locking safety latches, which it also features the hydraulic foot pedal operation and it gives you the option to lift up your mower effortless. Ability to lower the lift, the users can put the mower in neutral and raise lift platform slightly to disengage height locking levers, then with the universal design. Specifications: • Capacity: 350 lbs. • Lifting height: 23 inch • Wheel span: 40-3/4 to 49-3/8 inches • Item weight: 55 lbs. Pro lift T-5335a lawn mower lift is backed by one year from the date of the purchase.

• Safety lock for safely supporting the load
• Rubber padded platform to prevent scratching and to protect your machine
• Non-slip foot pedal allows effortless lifting the load
• Easily maneuverable and adjustable for a wide variety of machine

User questions & answers

Question:	Where is this made
Answer:	I checked the product to be sure, it states that it is "Made in China".
Question:	does it fold up for storage
Answer:	It folds up best if you just use loose bolts to secure the so called wheel baskets. remove them and store it on a 18" deep shelf. The pump jack is the height restriction for the shelf.
Question:	Is it a hydrualic
Answer:	The lifting mechanism is just a hydraulic bottle jack, which has a bracket to mount it within the framework of the lift. The bottle jack is operated by a foot pedal.
Question:	Will this lift be suitable for a poulan pro zt 48” mower
Answer:	I use my lift on my commercial Ferris IS2600Z with a vehicle weight of 1600#. Yeah, it'll handle your home owner mower.

Product features

Mower Jack Lift for Tractors and Zero Turn Lawn Mowers

To Safely Supporting the Load.

Rubber Padded Platform

Prevents from Scratching and Protects Your Lawn Mower.

Non-Slip Foot Pedal

Allows Effortless Lifting the Load.

Drive Mower Onto Wheel Baskets

Positions mower tire securely on wheel baskets centering the load on the lift.

To Raise the Lift

Turns the release valve clockwise until firm resistance is felt. Carefully pumps jack until mower reaches desired height. Final height must correspond with the locking teeth on the Height Locking levers.

Secure Locking Lever

Carefully turn the Release valve counter clockwise, slowly, until the Lift Platform locking levers engages the Height Locking Levers then close the release valve by turning it fully clockwise until firm resistance is felt.

To Lower the Lift

Pumps the lift Pedal several times to disengage the Height Locking Levers. Carefully turn the Release valve counter-clockwise, slowly, but no more than 1 turn from the closed position, to lower the load slow and safe.

• 【High Quality & Large Weight Capacity】This heavy duty loading ramps set is manufactured from high-strength while lightweight aluminum, which is easy to maneuver and handle loads up to 750 lbs. per ramp(1500lb Capacity in total). Providing a greater traction and making it easy to load and unload..
• 【Practical Uses & Labor-Saving】Easy to load various motorcycles and dirt bikes with this loading ramp supporting your favorite ride. A pair set suitable for ATV & UTV, lawn mower, truck, motorcycle, trailers,tiller, dirt bike and garden tractor and other smaller wheeled tools.
• 【Arched Shape & More Secure】Arched design for better load bearing capacity and soft tipped design reduces abrasion between your ride and the ramp. There are 3 caps at the bottom of the loading ramp, which will keep it from slipping and makes much safer and more stable when loading.
• 【Anti-slip Feet & Rust Protection】The durable aluminum material makes the ramp more light and not easy to get rusty. It can be used easily both indoors and outdoors, no worries about the mud in rainy days, simple operation and convenience washing.
• 【Folding Design with Safety Straps】Unfolded Dimension: 89.3 x 11.6"(LxW); Folded Dimension: 45.6 x 11.6"(LxW). No assembly is needed. Unfold and go. The included adjustable safety straps offer secure loading, when not in use, these ramps fold in half for easy storage in your garage or vehicle. Please contact the seller if you have any problems with them.

User questions & answers

Question:	Would these ramps be okay for loading a 140lb scooter wheelchair into a hoda crv
Answer:	I'm not sure - my experience has been with a small pickup without a cap. I have loaded and unloaded a snowblower and a large rototiller and had no problem with the weight. In both cases I walked them up and down the ramp. My concern with the CRV would be as you approach the back with the rear hatch open, will you have room to get it all the way in before you run into the hatch.
Question:	what is clearance from tread surface to top of side panels
Answer:	about 1 in.
Question:	How thick is the tread surface material
Answer:	The manufacturer should have the specifications.
Question:	I have a polaris ranger utv and an echo 13 ft. trailer. will these work with this utv and trailer
Answer:	Definitely.

Product features

Set of 2 Loading Ramps Details

• Color: Silver Ramps + Red Straps
• Material: Aluminum
• Unfolded Dimensions(Each): 89.8” x 11” x 4.1” (L x W x Thickness)
• Folded Dimensions(Each): 45.7” x 11” x 5.9” (L x W x Thickness)
• Load Capacity: Up to 750 LBS Single / 1500 LBS Pair
• Maximum Length: Approx. 7.5 FT
• Net Weight: 15.4 LBS

The Pair Smartxchoices Dual Aluminum Folding Arched ATV Truck Ramps Will Make Load Your ATV a Breeze!

Perfect for: Dirtbike, Sportbike, ATV & UTV, Lawn Mower, Snow Blower, Pickup Trucks, Motorcycle, Trailers, Garden Tractor, Utility Cart etc.

• These ramps are ideal for transferring any four-wheeled vehicle to a truck trailer. Use a single ramp to transport a dirt bike or motorcycle and use both to load an ATV, 4-wheeler, or lawn mower onto a truck bed. Clevr’s 7.5 ft aluminum ramps are both sturdy and versatile with their 1,500 lbs capacity (750 lbs each ramp).
• Whether you’re transporting an ATV a few miles or all the way across the country, Clevr ramps will help get the job done. The arched ramp design allows for optimal clearance, ensuring a smooth lift every time. These ramps are ideal for any mid-size tires including ATV tires and 4-Wheeler tires. They also make great lawn mower, motorcycle, snow blower, dirt bike, and garden tractor loading ramps.
• No need to purchase safety straps separately! These truck tailgate ramps include heavy duty load straps to keep the ramp firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling. Use them again and again to keep your 4x4 ATV, mini 4 wheeler, snow blower, or lawn mower safe during transfer.
• Each component of these trailer ramps is designed with optimal function in mind. They fold for easy transportation and only weigh 33 lbs, making them easy to move and operate. Rubber tipped fingers provide extra security to your vehicle while also preventing damage to the tailgate.
• Warning: The cut-outs on the ramp surface have sharp edges. Wearing utility gloves when handling the ramps is recommended.

User questions & answers

Question:	Will these work for an suv
Answer:	These Ramos have three fingers (red) that are used to support the ramps on a pickup’s tailgate. If your SUV has a raised lip across the rear cargo area that is at least 1” high the ramps should fit ok. The 1” high lip should be enough to Support the fingers and provide clearance for the ramp’s bottom rails in the vicinity of the fingers..
Question:	Is this ramp long enough for 4 steps
Answer:	Not sure what you are asking? Wheelchair ramp? Would work, but a bit unsafe. More information needed to give an answer.
Question:	Is there 2 ramps
Answer:	Yes, there are 2 ramps included
Question:	will the ramps clamp closed when folded.? I had some ramps that would take your fingers off because they would not fasten in closed position
Answer:	No they do not but so light I have never had a problem with that, I am careful when folding them up.

Product features

Clevr - 7.5' Pair of Folding Aluminum ATV Loading Ramps

The heavy-duty Clevr Loading Ramps (Set of 2) are the ultimate solution when loading your Lawnmower, ATV or other 4 wheeled items into a truck or trailer. The plate top design is great for loading ATV's or items with small tires. This ramp is constructed of high quality 6061 aluminum for superior durability and portability. The Ramps weigh only 32 lbs. but can hold up to 1,500 lbs.!

FEATURES

• Two ramps
• Arched design for better clearance
• Plate top style
• Safety straps
• Rubber tipped fingers

SPECIFICATIONS

• Size: 90" L x 11" W x 2”H (each)
• Folded: 46" x 11" x 6" (each)
• Total Weight: 32 lbs. | Weight per Ramp: 16 lbs.
• Weight Capacity: 1500 lbs total for a pair, 750 lbs each ramp
• Material: 6061 Aluminum
• Color: Silver

RUBBER TIPPED FINGER POINTS

Rubber tipped fingers provide extra security to your vehicle while also preventing damage to the tailgate.

FOLDING ALUMINUM RAMPS WITH STURDY CONSTRUCTION

Each component of these trailer ramps is designed with optimal function in mind. They fold for easy transportation and only weigh 33 lbs each, making them easy to move and operate.

2 SAFETY STRAPS INCLUDED!

These loading ramps include heavy duty load straps to keep the ramps firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling.

Product description

ZENY 7.5' Fold Aluminum ATV & UTV Loading Ramp Lawnmower Motorcycle Truck Trailers, Dirt Bike, Garden Tractor Ramp

Material: Aluminum

G.W.: 35.7 Lb ;Color: Silver ;

Max. Length: Appro x.7.5’;

Load Capacity:750 Lb (Each Piece)；1500 lb ( per pair );

Unfolded Size (Each): Approx. 89.7 x 11 x 4.1'' (LxWxThickness)；

Folded Size (Each): Approx. 45.7 x 11 x 5.9'' (LxWxThickness) each

Built-in traction surface prevents slippage

Adjustable safety straps are included

No assembly required

• 【1500 lbs Capacity】ZENY lightweight ramps are carefully designed using corrosion-resistant aluminum so that you can have years of maintenance-free use. Use a single ramp to transport a dirt bike or motorcycle and use both to load an ATV, 4-wheeler, or lawn mower onto a truck bed. 7.5ft aluminum ramps are both sturdy and versatile with their 1,500 lb capacity (Each piece 750lbs), they are ideal for transferring any four-wheeled vehicle to a truck trailer.
• 【Arched Design】The arched ramp design allows for optimal clearance, ensuring a smooth lift every time. This folding ramp also features serrated crossbars to allow for great traction. They are ideal for any mid-size tires including ATV tires and 4-Wheeler tires. They also make great lawn mower, motorcycle, snow blower, dirt bike, and garden tractor loading ramps.
• 【Safety Straps Included】These truck tailgate ramps also include heavy duty load straps to keep the ramp firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling. There are 3 caps at the bottom of the loading ramp, which will keep it from slipping and makes much safer and more stable when you load.
• 【Foldable & Lightweight Truck Ramps】 Each component of these trailer ramps is designed with optimal function in mind. They fold for easy transportation and only weigh 35.7 lbs, making them easy to move and operate. Rubber tipped fingers provide extra security to your vehicle while also preventing damage to the tailgat.
• 【Dimension】Unfolded Size (Each): Approx. 89.7 x 11 x 4.1'' (LxWxThickness)；Folded Size (Each): Approx. 45.7 x 11 x 5.9'' (LxWxThickness) each Net Weight: 35.7 lbs Note: Any question, please feel free to contact us.