14 best atv loading ramps

Product description

Our MaxxHaul aluminum ramp top kit has a width of 8" for each ramp and maximum capacity of 1400 lbs (700 lbs each). This top kit features duty aluminum construction for durability. Each ramp is designed to turn 2" x 8" boards intol all-purpose ramps. Includes protective pads that will help prevent scratching your tailgate. Non-skid top surface is designed to prevent slipping and increase traction.

• Turns your 2" x 8" boards into a sturdy, all-purpose utility ramps for loading your trailer, truck, shed and more
• Constructed from heavy duty extruded aluminum that will provide years of service
• Equipped with protective pads to protect your tailgate
• Features non-skid top surface for improved traction
• Includes mounting hardware to make installation fast and easy

User questions & answers

Question:	I want to use these to make ramps to load my D130 on my trailer. Trailer is 22" high, how do iknow how long of 2x8s I need so mower deck clears top
Answer:	I have 285 width rear tires. They fit with a small amt of space left on both sides. 20mm wider is less than an inch. it may stick out slightly beyond the sides, but it would still be fine IMO.
Question:	Why does it take 1-2 months to ship
Answer:	USAExcellent RampsNot as fearful with these as other brandI bought these to replace another brand I bought from HF that scared me because the plastic was brittle and pieces of ramp would crack off.... Always use jack stands just in case
Question:	Why does it say ships in 1 to 2 months? I'm not going to wait 2 months
Answer:	As far as I can determine, the height is the same. The difference is the maximum weight each set can hold. J.D.
Question:	Do they specify a certain length for the 2X8 boards
Answer:	I just put a tape measure onto the ramps and came up with the following - 6.5 inches tall, 10 inches wide, 35 inches long. Note that the tall/wide measurements were taken to the actual area where the tire sits. There is about an additional 1 to 2 inches plastic lip on the sides and back that cradle the tire once it's firmly at the top of the ramp. Manufacturer may use the outside dimensions but those don't tell you the true usability. In all honesty, they don't raise the car as much as you might think but they are fine for light duty.

Product features

Durable and Sturdy

Sturdy aluminum construction with traction surface to reduce or minimize slippage.

Easy To Install

Pre-drilled holes for easy installation.

Versatile

Safely load your equipment by converting your 2" x 8" to a pair of portable ramp.

• 【Release Transportation Work】Use a loading ramp to help your transportation job that remove the items to your pickup truck easy done and more safely.
• 【Strong Applicability】 Truck ramps are not only suitable for a wide range of motorcycles and off-road vehicles to support your favorite rides, but also large gardening tools to help your cleaning and care works. You can use it with ATV , Lawn Mower, Motorcycles, Dirt Bike and Garden Tractor, Snowblower and so on.
• 【Heavy Duty & 1,500 lbs Capacity】Constructed with HIGH QUALITY ALUMINUM ALLOY, this loading ramps are PURE MANUAL WELDED which are both sturdy and durable with their 1,500 lbs capacity for pair use( 750lbs for single use). With LOAD STRAPS for fixed ramps, ensuring that folding loading ramp does not collapse and slipping during transport.
• 【Protective Design】 Soft tipped design reduces abrasion between your ride and the atv ramps. There are 3 caps at the bottom of the truck ramps, which will keep it from slipping and makes much safer and more stable when you load.
• 【Foldable & Easy Storage】Folding loading ramps can be folded into a compact size when not in use, convenient for storage and carrying. Expanded Size: 89" L x 11.8" W Folded Size: 45.3"L x 11.8" W

User questions & answers

Question:	Will a lawn mower bottom out gone up the ramp
Answer:	It depends on the clearance of the mower and the height of your trailer. Mine does not
Question:	Anyone notice the tack welds all cracked after 1 year of light use
Answer:	We've had them less than a year. So far so good. Haven't noticed any cracks or other defects. They work fine.
Question:	are these avalable in 6ft
Answer:	Dont Know
Question:	Who does your photoshopping? I'd like to avoid hiring them by accident
Answer:	I don't do photoshopping

Product features

Foldable Ramps

For compact storage. Carry easily.

Extra Center Bar

For better load bearing capacity.

Reverse Barrier Design

Reducing the risk of the car going backwards.

Rubber Tipped Fingers

Provide extra security.

• Lightweight & Steady Aluminum Loading Ramps: Portable and lightweight aluminum ATV loading ramp for easy using without assisting.Durable aluminum construction supports up to 1500lbs/pair (750lbs/pc) capacity.
• Pickup Trucks Loading Ramps for Home: Foldable loading ramps for easy using. (Unfolded Size: 89.8*12”; Folded Size: 45.7*12”) Fast set up, just open it and ready to use. No installation required. Easy to fold and store-easy to lock up to truck bed.
• Folding Loading Ramps with Extra Features: Rubber tipped fingers provide extra security to your vehicle while also preventing damage to the tailgat. Having the securing straps to keep the ramps from falling away from the tail gate was a great feature that made the whole process go very smoothly.
• Versatile Folding Loading Ramp: These truck loading ramps are ideal for transferring any four-wheeled vehicle to a truck trailer. Use a single ramp to transport a dirt bike or motorcycle and use both to load an ATV, 4-wheeler, or lawn mower onto a truck bed. They also make great truck loading ramps folding,lawn mower loading ramps,folding ramps for pickup trucks,trailer loading ramps,truck bed loading ramp,pickup truck loading ramps.
• Quality Guarantee: A 30-day warranty (damage caused by non-human factors). If the loading ramp does not work as you expected, pls feel free to contact us, we have a professional after-sales team to serve you.

User questions & answers

Question:	Would these work with an Appliance Dolly? We need to move a refrigerator and range
Answer:	The ones I got would do so I have had both axles of my F350 on the ramps at various times and it was loaded with a tare weight of 12k.
Question:	Are they arched
Answer:	yes without a problem. this set is rated for 6,000 lbs per set, being 3,000 lbs per ramp. thank you
Question:	Will this loading ramp work to get a 650 lb atv into the back if my f
Answer:	I don't have them handy to look out right,I don't believe that would even come close to working. Can you weld piece of channel iron across that tube? That's what I did on the end of my trailer.
Question:	This is for a set of two ramps, correct
Answer:	Absolutely, my tractor is about 2400lbs and they handle it.

Product description

The heavy duty wide Titan 10 ft harley ramps are the ultimate solution when loading your big motorcycle into a tall truck or high trailer. This improved 4 beam design now has 5/8" thick rungs for more support when loading your heavy items. The side loading ramps are great for loading atvs and other four wheel items. ATV ramps are not intended for use with Golf Carts, UTVs like the Razor or similar.

• Total capacity: 2,700 lb distributed weight
• Thicker 4 beam design for the middle ramp
• Arched design for better clearance Serrated crossbars allow for great traction Safety straps included No assembly required
• Overall Weight: 96 lbs Overall Size: 120" x 40" x 6" Sides: 120" L x 11.25" W (each) Middle: 120" L x 17.25" W Sides Fold to: 60" x 11.25" x 6" (each) Middle Folds: 60" x 17.25" x 6"
• Middle Rungs: HD 5/8" diameter Average middle rung spacing: 4.25" Material: Aluminum

User questions & answers

Question:	Will it hold a Goldwing 1800 1180 lbs
Answer:	This Ultra-Tow bi-fold arched aluminum loading ramp set would be rated for 1,500 lbs per ramp and 3,000 lbs per pair. When these are not connected, each ramp would have the 1,500 lbs rating.
Question:	Do the fold up enough to fit in the bed of the truck with the bike
Answer:	Yes it does. It's not the easiest to access once it mounted on a trailer wall so we plug it into an outlet controlled with a switch. Lights work great. Haven't regretted buying them.
Question:	Can i separate the ramps to line up with my 3 wheel canam spyder
Answer:	Thanks for contacting us. The manufacturer did not provide us with the color temp for the light but we can tell you that it pulls about 20 watts and is about equal to a 100 watt incandescent. Boss Powersports
Question:	Can you use this for a 1500 lbs golf cart
Answer:	Has 4 holes so you can bolt to wall...bought it and within 2 weeks the bulb went out...lowe's sells stronger better ones

Product description

Safely loading and unloading your cargo and equipment is extremely important, and Cargo Smart Aluminum Straight Fixed Ramps offer the best and most efficient way to do so. You can trust these 12” W x 78” L ramps for safely and easily loading and unloading your lawn tractors, push mowers, garden tillers, ATVs, appliances and more. The distributed load capacity is 625 lb. per ramp (1,250 lb. per pair), giving you peace of mind that your equipment is secure. Adjustable safety straps are included, ensuring your equipment stays safe during loading and unloading.

• SAFELY LOAD AND UNLOAD: With a 1,250 lb. per pair (625 lb. per ramp)
• LIGHTWEIGHT RAMP: The lightweight, aluminum ramp is easy to transport and carry
• LARGE TREAD DESIGN: The large tread design with traction cut outs means your equipment will stay safely on the ramp while loading and unloading.
• SECURE LOADING: The included adjustable safety straps make for a secure loading and unloading experience, ensuring your equipment will safely be loaded onto your truck.
• RUSTPROOF: Built with strong and durable rustproof aluminum construction, these straight fixed ramps will last. 12” W x 78” L.

User questions & answers

Question:	What is distance of the open space between treads
Answer:	Look up your rim size. It says it on the side of your stock tires. Or Google it. I don't know the stock rim size of your bike.
Question:	I want to use these ramps for my generator but the wheels are only 8 inch. Are the wheels going to hang up in the gaps
Answer:	i don't think u can bundle 4 (10 inch ride tires), most people want the wider tires for the rear so they are so skinny, just looks funny in my opinion, plus for the pulling tires in the rear you would want more surface.
Question:	Does 78" represent the length of each ramp or is it the combined length
Answer:	Yes. These are 28". I ordered this same set.
Question:	how thick is the ramp
Answer:	I have a ranger 500 (2004). I put i 2" lift kit and they worked great. Also company was great with support and customer service. Any problems just send them back.

Product features

CHOOSE YOUR SHAPE / DESIGN

Our patented S-Curve styled ramps have the easiest transition, when traveling up or down the ramps. We also carry arched and straight ramps, if you prefer a more traditional style.

CHOOSE YOUR STORAGE

CargoSmart ramps are available in Bifold, Trifold, and non-folding options, depending on the style. Select a folding ramp for easier storage and transport.

RAMP KITS

Easily convert a board into an 8" or 12" ramp with our ramp plate kits. Each kit includes plates to build two ramps, just add the wood board.

ILLUMINATED RAMPS

"See What You've Been Missing" with the CargoSmart LED hybrid S-Curve Ramp. The built-in LED lights illuminate when the ramp is open, creating a lit runway for loading or unloading.

EVERYTHING NEEDED TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR

Our innovative line of ramps are durable and sturdy, and ideal for loading and unloading ATVs, motorcycles, lawn equipment, wheelchairs, scooters, and other smaller-wheeled equipment into trucks, trailers, sheds, and haulers.

EVERYTHING NEEDED TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR

From family vacations to your next outdoor adventure, CargoSmart offers innovative cargo management products that allow you to safely transport your coolers, luggage, camping equipment, bikes, boxes, outdoor gear, and other valuable possessions.

EVERYTHING NEEDED TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR

Organize and store your equipment and gear with CargoSmart X-Track and E-Track organizational systems. Our unique system is available in three different track lengths, and dozens of hook attachments and accessories to help configure the ideal solution for your needs. CargoSmart X-Track and E-Track systems are ideal for use in your garage, basement, shed, utility room, enclosed trailer, workshop, or anywhere else where durable and flexible storage is needed.

EVERYTHING NEEDED TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR

CargoSmart offers a variety of anchor points that can be bolted or welded into place. Ideal for truck and trailer applications, CargoSmart anchor points provide a secure connection for tie-down straps or other cargo management needs.

SECURE YOUR PASSION WITH CARGOSMART PRODUCTS, A SMART AND STYLISH WAY TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR.

Our mission at CargoSmart is to engineer cargo management solutions to safely and securely get you where you’re going. Our range of bike and sports racks, cargo carriers, ramps, and organizational solutions work as hard as you do – on the job site or on your next outdoor adventure. CargoSmart products are designed with innovative features that allow you to get the most out of your activities and passions.

Product description

The XL Bi-fold ramp from Yutrax is designed for an easier load into most pickup trucks by decreasing the slope in which you load by using a longer ramp. Once opened the ramp measures 50-inch x 86-inch, that's over a foot longer than similar Bifold ramps. The ramp is constructed of aluminum and welded along the rungs and Hinges. Other ramps use rivets on these key parts that can loosen over time.

• Lightweight, aluminum Construction
• Adjustable straps secure Ramps in place
• The ramp's extruded rectangular side rails resist bending while the Taller rectangular cross section supports more weight
• Rubber coated tabs prevent tailgate scratches
• Load Capacity at 1,600 lbs.

User questions & answers

Question:	Will this ramp work for loading a polaris ranger utv onto a 6" lifted silverado
Answer:	i have a honda 500 foreman. its not stock ,2 inch lift, 3inch oversized tires , and my gmc sierra has a six inch lift and 35s on it. loading it is a breeze. ass long as theyre wieght rated for your polaris , i think ull be fine. but its your call on the wieght rating. good luck.
Question:	Can you use this for going up drive ways
Answer:	I don't know what you mean. It is a ramp. We will use it to load things like a rider lawnmower onto a trailer.
Question:	It says folding arch ramp for the 85" ramp. I'm confused. I want a flat, 85" bifold ramp. Is this it
Answer:	This ramp does fold in half. The part that is arched/bent is the part that you would set on the bed of a truck to get your ATV/Dirtbike into the bed of the vehicle. The ramp itself is flat.
Question:	Do you know the exact plywood insert measurements for the bifold model? The instructions say 1/4 inch plywood but meansurements would be helpful
Answer:	The Rung Gap is 7" and the Width is 21.63"

Product features

YUTRAX Bi-Fold & Tri-Fold Ramps

Our bi-fold and tri-fold ramps offer the stability and strength of a full-width ramp, but also fold up for easier storage and transportation. Their fully-welded construction and rectangular components make them highly durable, giving you peace of mind when loading and unloading your vehicle.

Each YUTRAX folding ramp features rubber tabs that resist sliding and scratching and comes with security straps to hold the ramp in place.

Ultralight Design

YUTRAX ramps are constructed from highly sturdy and resilient, lightweight aluminum, making them easier to handle.

Strong, Durable Construction

Our ramps are built with extruded rectangular side rails to resist bending. The taller rectangular cross sections support more weight.

Welded Hinges and Joints

Our heavy-duty hinges and joints are welded rather than riveted, creating a rock-solid ramp to give you peace of mind.

Product description

Open dimensions are 69 inches long by 50 inches wide. Folded dimensions are 69 inches long by 17.5 inches wide. Compact and easy to store when folded, ideal for short-bed trucks. Lightweight, fully-welded aluminum construction. The Yutrax TX103 ramp offers the stability and strength of a full-width ramp, but also the ability to fold up for easier storage and transportation

• Manufactured from high-strength, lightweight aluminum with an overall Weight of 28 lb. making them easier to handle.
• Heavy-duty hinges and joints that are welded, not riveted giving you peace of mind. 1,750 lb. weight capacity will easily support your ATV
• When in use the TX102 sports a length of 69" and a width of 50" and folds to 17.5” in width for easy transport and storage. Extruded rectangular side rails resist bending, while the taller rectangular cross section supports more weight
• Rubber-coated tab attachment points support ramp on vehicle without scratching. Includes adjustable safety straps to secure the ramp to your vehicle
• One- Year Manufacturer’s Warranty

User questions & answers

Question:	My mistake, will this work for a 700lb motorcycle, plus rider
Answer:	The ramps have a 1750lb capacity. I would recommend going with longer ramps for a motorcycle. The longer the ramps are the easier it will be to load.
Question:	Would like to use this ramp for 700lb motorcycle with a plank in the middle - will on section support that weight into a low trailer
Answer:	Yes it will. I use it for a 2500lb Kubota tractor and it works great.
Question:	I plan to use it for two big dogs. if I install a thin plywood on top of all three sections would I still be able to fold it
Answer:	If you install individual thin plywood pieces within each section rails, the plywood will not interfere with folding. I am doing this to allow me to wheel a large refuel caddy for my tractor up the ramp after liking it up.
Question:	What is the spacing on the rungs or crosspieces
Answer:	The rungs are 7" between each other ( center to center they are 8"). The rungs are 14 " wide between the support runners.

Product features

YUTRAX Bi-Fold & Tri-Fold Ramps

Our bi-fold and tri-fold ramps offer the stability and strength of a full-width ramp, but also fold up for easier storage and transportation. Their fully-welded construction and rectangular components make them highly durable, giving you peace of mind when loading and unloading your vehicle.

Each YUTRAX folding ramp features rubber tabs that resist sliding and scratching and comes with security straps to hold the ramp in place.

Ultralight Design

YUTRAX ramps are constructed from highly sturdy and resilient, lightweight aluminum, making them easier to handle.

Strong, Durable Construction

Our ramps are built with extruded rectangular side rails to resist bending. The taller rectangular cross sections support more weight.

Welded Hinges and Joints

Our heavy-duty hinges and joints are welded rather than riveted, creating a rock-solid ramp to give you peace of mind.

• 【High Quality & Large Weight Capacity】This heavy duty loading ramps set is manufactured from high-strength while lightweight aluminum, which is easy to maneuver and handle loads up to 750 lbs. per ramp(1500lb Capacity in total). Providing a greater traction and making it easy to load and unload..
• 【Practical Uses & Labor-Saving】Easy to load various motorcycles and dirt bikes with this loading ramp supporting your favorite ride. A pair set suitable for ATV & UTV, lawn mower, truck, motorcycle, trailers,tiller, dirt bike and garden tractor and other smaller wheeled tools.
• 【Arched Shape & More Secure】Arched design for better load bearing capacity and soft tipped design reduces abrasion between your ride and the ramp. There are 3 caps at the bottom of the loading ramp, which will keep it from slipping and makes much safer and more stable when loading.
• 【Anti-slip Feet & Rust Protection】The durable aluminum material makes the ramp more light and not easy to get rusty. It can be used easily both indoors and outdoors, no worries about the mud in rainy days, simple operation and convenience washing.
• 【Folding Design with Safety Straps】Unfolded Dimension: 89.3 x 11.6"(LxW); Folded Dimension: 45.6 x 11.6"(LxW). No assembly is needed. Unfold and go. The included adjustable safety straps offer secure loading, when not in use, these ramps fold in half for easy storage in your garage or vehicle. Please contact the seller if you have any problems with them.

User questions & answers

Question:	Would these ramps be okay for loading a 140lb scooter wheelchair into a hoda crv
Answer:	I'm not sure - my experience has been with a small pickup without a cap. I have loaded and unloaded a snowblower and a large rototiller and had no problem with the weight. In both cases I walked them up and down the ramp. My concern with the CRV would be as you approach the back with the rear hatch open, will you have room to get it all the way in before you run into the hatch.
Question:	what is clearance from tread surface to top of side panels
Answer:	about 1 in.
Question:	How thick is the tread surface material
Answer:	The manufacturer should have the specifications.
Question:	I have a polaris ranger utv and an echo 13 ft. trailer. will these work with this utv and trailer
Answer:	Definitely.

Product features

Set of 2 Loading Ramps Details

• Color: Silver Ramps + Red Straps
• Material: Aluminum
• Unfolded Dimensions(Each): 89.8” x 11” x 4.1” (L x W x Thickness)
• Folded Dimensions(Each): 45.7” x 11” x 5.9” (L x W x Thickness)
• Load Capacity: Up to 750 LBS Single / 1500 LBS Pair
• Maximum Length: Approx. 7.5 FT
• Net Weight: 15.4 LBS

The Pair Smartxchoices Dual Aluminum Folding Arched ATV Truck Ramps Will Make Load Your ATV a Breeze!

Perfect for: Dirtbike, Sportbike, ATV & UTV, Lawn Mower, Snow Blower, Pickup Trucks, Motorcycle, Trailers, Garden Tractor, Utility Cart etc.

Product description

bROK 8 inch Aluminum Ramp Kit 700 lb capacity are the perfect solution for you to Command-The-Task at hand. These Ramp Kits enable you to create custom ramps for all your loading needs. The full width ultra-ribbed plates provide maximum traction with a strong, stable surface. Made with high grade aluminum and plated hardware, these ramp ends resist corrosion and provide years of service. The included full width scratch proof pads protect surface finishes. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Aluminum Ramp Kit to COMMAND the task of loading your essentials
• CONFIDENTLY turn your 2" x 8" planks into ramps to transport up to 700 lbs of your essentials with full width slip resistant traction ribs
• PROTECT your paint finish with the included scratch proof pads
• QUICKLY create ideal length ramps with the included hardware and your wood planks
• PROTECT your investment with high quality solid aluminum ends, scratch proof pads and steel hardware.

User questions & answers

Question:	How much weight will the ramps support if I use 8-foot 2x8 wood planks
Answer:	My experience is limited to a riding mower. However, I am confident my ramps (8-foot 2X8) could handle significantly more weight.
Question:	My 2x8 ramp kits will nott fit onto the wood properly am I doing something wrong
Answer:	It dosent slip into ramp kit it just butts up against it
Question:	does this fit U.S. dimensional lumber? the ones I just purchased from amazon do not
Answer:	They fit the 2 by 8 ‘s i got from Home Depot just fine
Question:	length of boards to use
Answer:	A chart comes with the kit. I bought 8 foot long 2x8 and cut them to 6 1/2 feet so they would fit in my truck bed easily. Just remember, the shorter the board, the steeper the ramp.

• 7.5' perforated Non-Plate folded aluminum ramp. Fit for: ATV & UTV, Lawn Mower , Truck , Motorcycle , Trailers , Dirt Bike and Garden Tractor
• Lightweight aluminum construction, It won't take up to much space when it is folded
• Comes with rubber tipped fingers and safety straps and its built-in traction surface prevents slippage
• Dimensions: 91"x11.5" (each), Folded Dimensions: 45.5"x11.5"x6" (each)
• Package content: 2 pcs Aluminum Folding Ramp, Tie Down Straps Included

User questions & answers

Question:	Can I use this ramp to load furniture items into a shipping container . The shipping container is 4ft off the ground
Answer:	Dear Sila Tupe, Thanks for your inquiry and we are really sorry for the late reply. Based on the information you provide, after consulting our supplier, we will advise you to purchase a heavy duty ramp that may be more appropriate. Any question, please feel free to contact us. Best regards, Imane
Question:	Are these rated for 1500 per ramp or for the pair
Answer:	Don't know that answer. 1500 lbs sounds a little too much for just one ramp. I use it for getting a lawn tractor into my shed and it works quite nicely for that.
Question:	Will these work for loading a utv in the back of a pickup
Answer:	Thnaks for your inquiry. The total load weight of our ramp are 1500lb. and the single load weight is 750lb.If your car plus people's weight is within 1500 pounds, it is affordable.
Question:	What is the weight of each ramp
Answer:	Total weight is about 31.74 lb, so each ramp will be around 15.87lb.

Product features

2x 7.5' Fold Aluminum ATV Loading Ramp Lawnmower Motorcycle Truck 1500 LB

Load Capacity: 340 Kg/750 Lb (Each Piece).

Unfolded Size (Each): Approx. 226 x 28 cm/ 89'' x 11'' (LxW).

Constructed from durable lightweight Aluminum.

Comes with rubber tipped fingers and safety straps.

Plate top style and its built-in traction surface prevents slippage

Specifications:

Material: Aluminum

G.W.: 15.9 Kg/ 35.05 Lb

Max. Length: Approx. 226 cm/ 7.5'

Load Capacity: 680 Kg/ 1500 Lb (Per Pair)

Load Capacity: 340 Kg/750 Lb (Each Piece)

Unfolded Size (Each): Approx. 226 x 28 cm/ 89'' x 11'' (LxW)

Folded Size (Each): Approx. 116 x 28 cm/ 45.67'' x 11'' (LxW)

Color:Silver

Product description

Safely loading and unloading your cargo and equipment is extremely important, and Cargo Smart Aluminum Tri-Fold Ramp offers the best and most efficient way to do so. You can trust this 50” W x 76” L ramp for safely and easily loading and unloading vehicles like push mowers, ATVs, garden tillers and more. The distributed load per ramp capacity is 1, 500 lb. per ramp, giving you peace of mind that your equipment is secure. Adjustable safety straps are included, ensuring your equipment stays safe during loading and unloading.

• SAFELY LOAD AND UNLOAD: With 1, 500 lb. total ramp capacity and 500 lb. distributed load per section capacity
• LIGHTWEIGHT RAMP: The lightweight, aluminum ramp is easy to transport and carry, but strong enough to load and hold your heavy equipment. It also provides a single ramp surface for easy positioning.
• LARGE TREAD DESIGN: The large tread design with traction cut outs means your equipment will stay safely on the ramp while loading and unloading.
• SECURE LOADING: The included adjustable safety straps make for a secure loading and unloading experience, ensuring your equipment will safely be loaded onto your truck.
• RUSTPROOF: Built with strong and durable rustproof aluminum construction, this tri-fold ramp will last. 50” W x 76” L.

User questions & answers

Question:	Does a riding mower get bouncy with the gaps or will it load smoothly? I read 3.5 inch gap. Thanks
Answer:	Compare the size from your original equipment to the size you wish to purchase
Question:	Would this be a good option for loading and unloading a 500 lb motorcycle on a flatbed trailer
Answer:	Idk if they would fit your mower or not. You have to make measurements of a couple of things to make sure or consult a local mower shop for the correct size. Mine was the same as the old tire demensions.
Question:	What is the ramp open widths where the tires roll
Answer:	Fits gravely 50" and skag 48" and 50 Unsure about the snapers
Question:	It says "light weight" without specifying actual weight. Could someone please clarify
Answer:	I was able to use it on my Mustang 42" zero turn. I had to trim 1/4-3/8" off each end of the center shaft (after removing the bearings). I would replace them in pairs since they are about 1" larger around than the originals. In short they do fit with some work.

Product features

CHOOSE YOUR SHAPE / DESIGN

Our patented S-Curve styled ramps have the easiest transition, when traveling up or down the ramps. We also carry arched and straight ramps, if you prefer a more traditional style.

CHOOSE YOUR STORAGE

CargoSmart ramps are available in Bifold, Trifold, and non-folding options, depending on the style. Select a folding ramp for easier storage and transport.

RAMP KITS

Easily convert a board into an 8" or 12" ramp with our ramp plate kits. Each kit includes plates to build two ramps, just add the wood board.

ILLUMINATED RAMPS

"See What You've Been Missing" with the CargoSmart LED hybrid S-Curve Ramp. The built-in LED lights illuminate when the ramp is open, creating a lit runway for loading or unloading.

EVERYTHING NEEDED TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR

Our innovative line of ramps are durable and sturdy, and ideal for loading and unloading ATVs, motorcycles, lawn equipment, wheelchairs, scooters, and other smaller-wheeled equipment into trucks, trailers, sheds, and haulers.

EVERYTHING NEEDED TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR

From family vacations to your next outdoor adventure, CargoSmart offers innovative cargo management products that allow you to safely transport your coolers, luggage, camping equipment, bikes, boxes, outdoor gear, and other valuable possessions.

EVERYTHING NEEDED TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR

Organize and store your equipment and gear with CargoSmart X-Track and E-Track organizational systems. Our unique system is available in three different track lengths, and dozens of hook attachments and accessories to help configure the ideal solution for your needs. CargoSmart X-Track and E-Track systems are ideal for use in your garage, basement, shed, utility room, enclosed trailer, workshop, or anywhere else where durable and flexible storage is needed.

EVERYTHING NEEDED TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR

CargoSmart offers a variety of anchor points that can be bolted or welded into place. Ideal for truck and trailer applications, CargoSmart anchor points provide a secure connection for tie-down straps or other cargo management needs.

SECURE YOUR PASSION WITH CARGOSMART PRODUCTS, A SMART AND STYLISH WAY TO SECURE, TRANSPORT, AND ORGANIZE YOUR GEAR.

Our mission at CargoSmart is to engineer cargo management solutions to safely and securely get you where you’re going. Our range of bike and sports racks, cargo carriers, ramps, and organizational solutions work as hard as you do – on the job site or on your next outdoor adventure. CargoSmart products are designed with innovative features that allow you to get the most out of your activities and passions.

Product description

The Aluminum Folding Arched Dual Runner ATV Ramps make loading your ATV a breeze! Manufactured from high-strength, lightweight aluminum, these folding ramps are easy to maneuver and can handle loads up to 750 lbs. per ramp. The specially designed arch ensures maximum ground clearance to prevent your ATV from bottoming out while loading. The cross bars feature 3” rung spacing, providing a smooth ride and extra traction for pneumatic tires, even in wet and muddy conditions. The included adjustable safety straps offer secure loading, and the three rubber-coated 4” mounting fingers on each ramp will prevent scratches on your truck bed or trailer. When not in use, these ramps fold in half for easy storage in your garage or vehicle. Please note, these ramps are not recommended for loading golf carts.

• Dual runner arched folding loading ramps for loading and unloading ATVs, UTVs, and more into truck beds and trailers; package includes 2 ramps
• Each ramp measures 7' 6" L x 11.25" W; maximum 750 lb weight capacity
• Arched for maximum engine and tailpipe clearance
• Serrated rungs for superior traction in mud, rain or snow; plate-style attaching lip safely supports ramp on vehicle; includes 2 adjustable safety straps to secure ramps to vehicle
• High-strength, lightweight aluminum construction

User questions & answers

Question:	Do these require assembly
Answer:	Practically no. You will need to loop the straps around the center bar which only takes a couple minutes. All the metal is pre assembled.
Question:	When these are folded how long do they measure? Is it about 45 inches or is there overlap
Answer:	Sorry it took so long to respond. I've been busy with other things. The ramps from the ground to the notch where it touches the trailer is approximately 84 to 85 inches. The "fingers" are several more inches. I used them again today. I've had no problems with them and for what they are designed for - lawn mowers, go-karts - they are just fine. And, yes, i do recommend them.
Question:	I have a 2 wheel cart with 10 inch neumatic tires. I load sound gear into the bed of my truck. Will my tires get stuck in the ramps
Answer:	Probably. Openings in deck surface work for larger diameter wheels/tires. Small tires may fall into the spaces unless you add something to cover or close the gaps.
Question:	Is this price for a set of two ramps
Answer:	Yes it seems like it was set. I just knew what kind of ramps I wanted and this set fit the bill! These are lightweight(14Lbs. each) and pretty strong built ramps. I run my John Deere lawn mower,(probly 700 LBS) onto my trailer and they work great. Hope that helps you out. Thank You

Product features

Black Widow Dual Runner ATV Ramp

• Folding dual-runner ramp for loading and unloading ATVs, UTVs, and more
• Serrated rungs for superior traction with an arched design for maximum engine and tailpipe clearance
• Rubber-coated finger-style attaching points and two safety straps support ramp on vehicle
• Manufactured from high-strength, lightweight aluminum
• 1,500 lb. total weight capacity; 750 lbs. per ramp
• Each ramp measures 7-1/2' L x 11-1/4" W and folds in half for easy transport and storage

Serrated Rungs for Maximum Traction

A serrated rung surface provides maximum traction while loading and unloading while still allowing dirt, debris, and moisture to easily wash through the ramp.

Finger-Style Attachment Points

Rubber-coated, finger-style attachment points securely attach to your tailgate or trailer without scratching paint.

Impressive Weight Capacity

An impressive 1,500 lb. total weight capacity can handle most ATVs, UTVs, golf carts, and more.

Powersports Ramps

Loading ramps from Discount Ramps are the ideal solution for your four-wheeler, UTV, or motorcycle. We offer trailer ramps, extra-long quad ramps, single-runner ramps and many other styles with a low price promise. Load your quad up to bring to a work site, head to the race track, or haul to your favorite trail on a ramp that meets your unique situation.

• BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 8-inch (5.1 by 20.3 cm) boards into sturdy, all-purpose utility trailer ramps; Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of ramps; 2-inch by 8-inch ramp boards required (not included); Kit weighs just under 6 pounds for easy storage, installation, and handling
• DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability; Loading ramp brackets provide reliable stability and resistance to rust and corrosion; Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5 by 7.25-inch (12.7 by 18.4 cm) faceplate, and pre-screwed bolt holes
• ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 7.5-inch (10.2 by 19.1 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything; Anti-slip rubber feet help to hold your ramp in place while loading up your toys
• MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (317 kg) each, while combined these ATV ramps can handle up to 1400 lbs. (635 kg); With this much support, you can quickly and safely load, secure, tow, and organize your motorcycles, motocross bikes, wagons, wheel barrels, and bicycles into a storage shed, truck bed, or trailer
• EASY TO INSTALL: Using the included hardware, attach the 2 aluminum top plates to one end of your 2x8 lumber board; Slide the anti-slip rubber feet to the other end; Place the top plates on the edge of the tailgate and adjust the distance between the ramps based on your load size; Extra holes in the top plate allows you to drill the ramp into place on your tailgate for a more secure hold

User questions & answers

Question:	What size drill bit is needed for the tailgate
Answer:	If 10" is enough for your load, I don't see why not although you may have some overhang of the ramp plates.
Question:	x8 lumber from homedepot/lowes is acturally 1.5x7.25, does it fit this 2x8 ramp kit? OR should I buy 2x10 lumber ? How long for best ramp angle
Answer:	The ramps work fine without mitering bottom of 2x6 boards, I’ve loaded and unloaded large snow blower eassaly without any trimming of boards.
Question:	Could I use this kit to make a ramp to get in and out of a shed? The elevation is only about 16-18 inches
Answer:	The brackets are scaled to fit the actual dimensions of a finished 2 x 12 board. 1-1/2" x 11-1/4". These are good brackets that are easily attached to the board. Buy them. You will be pleased with our purchase.
Question:	What lenght board is recommended to use with this kit? Thank you
Answer:	There is no need to bend the aluminum ramp ends. The ends will lay flat on the supporting surface if the wood ramps are cut to the correct length. The instructions supplied with the kit specify how long the wood ramps need to be dependent on the height from the ground that the ramps will be placed on. Additionally, there are pins in the kit that can be installed on the ledge that the ramp sits on. The pins slip into holes in the ramp ends securing the ramps in place while the ramps are in use.

• COMPACT DURABLE AND LIGHTWEIGHT- These loading ramps are lightweight, durable, weather resistant and built from 6063 aluminum, Weight is 33 pounds. Heavy duty hinges, joints, and crossbars are welded, this allows for the ramps to be folded and unfolded countless times without malfunctions.
• PERFECT FOR LOADING AND UNLOADING- The ramps are 11 inches wide & 89 inches long, wide enough to load your mower, dirt bike, motorcycle, snow blower, ATV, trailers, mountain bikes, 4 Wheelers, and garden tractors into your standard size truck or van. These ramps have a load capacity of 750 pounds each, combined rating 1500 LBS. Load and unload your ride worry-free.
• SAFE AND BUILT TO PERFORM- Equipped with E-Z grip finger-shaped rubber truck rest to prevent vehicle and tailgate damage. No sharp edges, the ramps come equipped with tie-down straps for safe and worry-free loading. This pair of ramps is built for performance, the angles and design reduce abrasion to your load, and create an excellent resistance to pressure and perfect balance.
• NO ASSEMBLY REQUIRED- The ramps are easy to use, simple and straightforward. Simply unfold and use. They are compatible with most vans and trucks and get the work done quickly and effectively. No other ramps compare. The ramps are 46 inches when folded, will fit in most back seats for easy carry and easy storage
• THE BEST QUALITY IN THE MARKET- As a leading name in our industry, being around for 15 years, we know precisely what is important to you, and we put it all together in our ramps. We are backing this up with a 5-year Pit Posse guarantee against workmanship and defects. If you are not 100% satisfied, we will give you a full refund or a free exchange, no questions asked.

User questions & answers

Question:	Will these ramps hold a golf cart
Answer:	They work great for our polaris ranger, (loading onto a tritan snowmobile trailer) which im guessing weighs more than a golf cart. Hope that helps.
Question:	Has anyone used these to load a UTV on a snow mobile triton trailer? and if yes how did they work
Answer:	Nope, sorry:/
Question:	are the ramps arched
Answer:	Yes. They have a slight arch towards the top end. I don't feel nervous anymore driving an 800 lb quad into my truck bed. I used to have 6 ft ramps and it was a little too sketchy for me.
Question:	How wide is each ramp
Answer:	Each ramp is 11" wide.

Product features

PERFECT FOR LOADING AND UNLOADING

The ramps are 11 inches wide & 89 inches long, wide enough to load your mower, dirt bike, motorcycle, snow blower, ATV, trailers, mountain bikes, 4 Wheeler's, and garden tractors into your standard size truck or van. These ramps have a load capacity of 750 pounds each, combined rating 1500 LBS.

COMPACT DURABLE AND LIGHTWEIGHT

These loading ramps are lightweight, durable, weather resistant and built from 6063 aluminum, Weight is 33 pounds. Heavy duty hinges, joints, and crossbars are welded, this allows for the ramps to be folded and unfolded countless times without malfunctions.

SAFE AND BUILT TO PERFORM

Equipped with E-Z grip finger-shaped rubber truck rest to prevent vehicle and tailgate damage. No sharp edges, the ramps come equipped with tie-down straps for safe and easy loading. This pair of ramps is built for performance, the angles and design reduce abrasion to your load, and create an excellent resistance to pressure and perfect balance.

YOUR SATISFACTION IS OUR # 1 PRIORITY

Pit Posse takes pride in offering high-quality tools and we are confident you are going to love our primary clutch puller. If you're not 100% satisfied we will give you a full refund or a free exchange, no questions asked.