13 best hydraulic motors

Product description

Features:

Horizonal mount Hand held pendant with about 15 foot( 4.5m) removal cord and start solenoid Feature Remote operated

Remote Included! Perfect for Dump Trailers

Lift Gates!!Perfect replacement pump for 12VDC remotely controlled hydraulic systems

Designed for horizontal mounting Standard duty 12vdc Motor Fluid choice determined by operating environment/temperature



Technical Parameters:

*Quart: 6 Quart

*Reservoir: Metal Reservoir

*2.0 GPM; SAE # 6 Port

*Voltage: DC 12V

*Acting: Double-acting

*Mounting: Horizontal Mount

*1500 PS Max Relief Setting on B port

*3200 PSI Max. Relief Setting for Increased Lifting Power on A port Application: for Dump Truck, Unloading, Crane, Lifting, etc.



Directions for use:

According to hydraulic principle diagrams, with clean connecting hydraulic power unit and oil cylinder tubing

According to the motor and the power of the electromagnetic valve marked characteristics( ac, dc voltage is properly connected.)

Inching motor observe any abnormal phenomenon. In actuators, without load, start the electric, short run test, check whether all the parts run smooothly, determine and correct after loading step by step to normal operation

(Notice:Please Feel Free To Contact Us When You Have Problems On Installation)



Package Include:

1pc 12V 6L Double Acting Hydraulic Pump Item.

1pc English Manual

Several Related Accessories

• CE certification to ensure you can use it safely.
• It consists of high pressure gear pump, DC motor, multi-purpose integrated block, various function valves, oil tank and other components. It is widely used as the power resource for lifting and pushing device.
• This hydraulic power unit is used as a fuel supply device,also it is the perfect replacement pump for 12V DC remotely controlled hydraulic systems; through external pipe system connected to a number of hydraulic cylinder to control multiple sets of valve movement.
• The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.Its high quality starter ensure long life and a fast starting each time.
• Widely used in dump trailers, dump trucks, RVs, lifts, elevator doors, trailers, wreckers, car carriers, agricultural equipment etc.

User questions & answers

Question:	hi is this recommended to use for motorhome slide out to replace the orginal and it runs a double acting cylinder to retract the a room in and out
Answer:	It would do the job, but the valves in these pumps are unreliable. It may strand you with the with the room stuck out. they seem to fail in the retract side
Question:	How to get it to power up and down? It will only power up
Answer:	Either your RAM is only one way which would use a lot of oil or your unit is defective. mine works great. power up and down
Question:	what is the warranty
Answer:	I don't know. I didn't bother to ask. I just needed a new pump. I would ask the seller. Mine's been in my dump bed for a month of daily use and is working awesome
Question:	Want to know what guage wire to use since we have just purchased the pump
Answer:	The pump I bought does not have enough pressure to lift my dump trailer with a load I'm having to get a new pump installed again and the pump I bought from amazon has more pressure than the old one I took off. I did adjust the pressure also. It is very dependable as far as working.I hope this helps

Product description

Gerotor design provides compact volume, high power and low weight. Higher CIPR and higher torque than others.

• Aftermarket Replacement: Char-Lynn 101-1001-009, BUYERS SaltDogg CM004P, and Torwel T220107
• 1" Diameter Shaft with 1/4" Woodruff Keyway
• OEM Torwel T220107
• Continuous flow - 10.9 GPM @ 3.23 cubic inch/rev with 71.5 ft-lb torque (858 inch-lb) @ 1800 psi. Higher CIPR displacement and torque than others. Intermittent torque is 1100 in-lb.
• Used on spreaders by BUYERS, Swenson, Torwel, Flink as well as agricultural, construction, forestry and marine equipment.

User questions & answers

Question:	What hp motor does this need
Answer:	yes
Question:	What size hose connections does it have
Answer:	can fit both
Question:	Can you drill using this motor
Answer:	This is both metal and plastic.
Question:	Can this be used as a pto hydraulic pump
Answer:	Mine is cast metal. The entire body of this sprayer is cast metal. The portion that you are asking about is strong and not a point of failure - the resin plastic loop associated with the pull mechanism is what cracks and fails before anything else. Expect one to two seasons from this item. That is how long mine lasted.

Product description

Buyers Products hydra star series hydraulic motors are economical, efficient, small, compact, & powerful. Designed for medium-duty applications, these motors have the industry Proven Spool value combined with state-of-the-art gerotors.

• 1" diameter straight shaft and 1/2" npt port
• 1/4" woodruff keyway
• More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products—it’s amazing what Buyers Products can do for your truck
• We Do Things The Right Way: We design products like we we’re building them for ourselves, because we are. Our teams are staffed with engineers and experts who know how to make a product exceptional
• Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care, innovation, and value across our range of products

User questions & answers

Question:	Is the shaft drilled and taped
Answer:	The maximum output of this motor is 9.4 HP. There are internal power losses due to the motor and pump alone. For example, if you had a supply motor producing exactly 9.4 HP and you coupled it directly to the pump and hydraulic motor the output would not be 9.4 HP because of internal losses. Now, when you add in the power losses due to plumbing such as length of hoses, fittings, filters, heat, pump efficiency, mechanical drive such as chains/sprockets and other restrictions there are more power robbing losses. If you assume there are 50% power losses from the power source to the pump, through the pump and then to the final shaft output of the motor, you'd need a source producing at least 19 HP. So, the question is not a simple one having a simple answer.
Question:	rpm output
Answer:	Female thread is 1/2-14
Question:	Do you have a seal kit for this motor
Answer:	These motors are designed to transmit torque. The bearings are not designed to withstand the end thrust associated with drilling and boring. If you mounted the drill bit and chuck assembly in a fixture that would isolate the motor then you could avoid transferring the feed force directly to the motor shaft. It would also eliminate unnecessary side loading of the motor shaft. We hope this helps.
Question:	Do you have this motor with an sae 9 tooth 16/32 spline drive shaft
Answer:	no.... this is a hydraulic motor ...oil turns the shaft.

Product description

12V Perm Magnet Motor 1HP Compatible with Lippert 167576, 414018 & Bosch F000MM0809 compatible to use on Lippert Slide out & Leveling systems Lippert Components Leveling System Hydraulic Pump Motor Motor Diameter 3, O/A length 5.75 housing length 5, centerline to centerline of bolts 2.63.

• East Lake Marine Electric is located in Oldsmar, FL.
• Compatible to use on Lippert Slide out & Leveling systems
• Compatible with Lippert #167576, 414018 & Bosch #F000MM0809
• 12V Perm Magnet Motor 1 HP
• O-Ring included

User questions & answers

Question:	Does this motor come with a gasket
Answer:	Sorry but I do not have a motor with sae9 tooth 16/32 spline drive shaft.

Product description

Single Phase Hydraulic Pump

Shipping weight 52 pounds. Vertical Fitting included (will fit most lifts) Universal Mounting Bracket included (will fit most lifts) Attachment Hardware and other hydraulic systems. Load holding on all ports.It is convenient to operate with safety

assured, long life, and sturdy body. Besides, it owns the quality of sturdy and is easy to operate.

High Quality Material for Longevity

Fast Starting

Safety Assurance

Easy To Operate

Sturdy and Durable

Over-pressure unit of pressure safety valve to avoid over pressure damage or extremely pressured.

Rapid Start

The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.Its high quality starter ensure long life and a fast starting each time.

Low Noise

Constructed with high quality oil suck pipes, which needed to be cleaned often, our pump work in a low-noise condition.

Quick Oil Output

Perfect replacement pump for 12VDC controlled hydraulic systems, designed for horizontal mounting, capable of quick oil output.

Fully Equipment

This hydraulic pump is equipped with other hydraulic tools can carry out lifting, pressure type, elbow, bending row, straightening, cutting, assembly, demolition and many other work. Reduce labor intensity.

Wide Application

Used in applications where extending a hydraulic cylinder is needed, truck tailgate lift, rv leveling, scissor lift, dump trailer, lift truck, snow plow, aerial platform, road signs, material handling, wheelchair lifts, etc. Specifications

2 Horsepower

208-230 volt, 60 cycle (ready for hard-wire)

Single Phase

3450 RPM

4.0 Gallon Reservoir

Running amperage at 230v is 18 amps

Package Content

8L Hydraulic Pump

• 【HIGH QUALITY MATERIAL FOR LONGEVITY】- Full high quality construction with high strength and hardness. Good wear resistance, durable in use.
• 【FAST STARTING】- The high-quality starter ensures a fast start every time and a long using period, Reduce labor intensity, improve work efficiency.
• 【SAFETY ASSURANCE】- The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh situations.
• 【EASY TO OPERATE】- Equipped with other hydraulic tools can carry out lifting, pressure type, elbow, bending row, straightening, cutting, assembly, demolition and many other work.
• 【WIDE APPLICATION】- Used in applications where extending a hydraulic cylinder is needed, truck tailgate lift, scissor lift, dump trailer, lift truck, snow plow, aerial platform, road signs, material handling, wheelchair lifts, etc.

User questions & answers

Question:	Looking for a replacement power unit for Ben Pearson 12k 4 post lift
Answer:	I would think this would work. If it's not a match, send it back.
Question:	Why do none of these have the flow rate listed? That is one of the most important parameters. Flow rate
Answer:	Prob because not tested by factory
Question:	Is there an electric release valve available for this unit
Answer:	No.
Question:	What is the flow rate? Gallons per minute
Answer:	I don't know that. But it lifts vehicles as fast as the original motor. And easily installed. Watch the fittings, they make some things universal, which is a good thing, but the threads on some of my old motor are different where the hydraulic hose connects. So I used the one they sent with it. You can't beat it for the price. I've had mine a week, if I get a few years out of the China made motor, I'll be satisfied.

Product features

Sturdy and Durable

Over-pressure unit of pressure safety valve to avoid over pressure damage or extremely pressured.

Rapid Start

The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh situations.Its high quality starter ensure long life and a fast starting each time.

Low Noise

Constructed with high quality oil suck pipes, which needed to be cleaned often, our pump work in a low-noise state.

Quick Oil Output

Perfect replacement pump for 12VDC controlled hydraulic systems, designed for horizontal mounting, capable of quick oil output.

Fully Equipment

This hydraulic pump is equipped with other hydraulic tools can carry out lifting, pressure type, elbow, bending row, straightening, cutting, assembly, demolition and many other work. Reduce labor intensity.

Wide Application

Used in applications where extending a hydraulic cylinder is needed, truck tailgate lift, rv leveling, scissor lift, dump trailer, lift truck, snow plow, aerial platform, road signs, material handling, wheelchair lifts, etc.

Single Phase Hydraulic Pump

Here we present you single phase hydraulic pump.The 4.0 gallon plastic reservoir measures 19-1/2" overall length from the neck to the bottom and is 7" x 7-1/2" around.Overall length of the power units is 31-1/2" in length.Shipping weight 52 pounds.Vertical Fitting included (will fit most lifts) Universal Mounting Bracket included (will fit most lifts) Attachment Hardware and other hydraulic systems. Load holding on all ports.

Product description

PartsPro Eaton Char-Lynn Replacement Gerotor Motor 103-1038-012 Replacement, (Motor,Hydraulic, 2-Bolt, 15.4 CIPR)

• Aftermarket Replacement Char-Lynn 103-1038-012
• 1" Diameter Shaft with 1/4" Woodruff Keyway
• Continuous Flow , 235 RPM, -13.2 GPM @15.4 cubic inch/revolution w/280 Ft-Lb Torque
• Used on Agricultural, Forestry, Mining, Construction, Marine and other Equipment

Product description

**Verify part fits before purchasing**

Specs:

Unit Type: Hydraulic Motor

Voltage: 12

Rotation: CW

KW: 0.8

Brief: FENNER FLUID POWER, PRIME-TRAK, PRIME MOVER, SPX

Replaces OEM Numbers:

ARROWHEAD: LIA0005

ARROWHEAD (OEM): MM225

J & N: 430-29013

LETRIKA (ISKRA) AFTERMARKET: IM 0172

LETRIKA (ISKRA) DESCRIPTION: AME1614, AME1643, AME1720

LETRIKA (ISKRA) OEM: 11.212.159, 11.212.334, 11.216.238

MAHLE: MM225

SPX FLUID POWER: MF-4042

WESTERN MOTORS: W-8055

• Spec: Unit Type: Hydraulic Motor, Voltage: 12, Rotation: CW, KW: 0.8, Brief: FENNER FLUID POWER, PRIME-TRAK, PRIME MOVER, SPX
• Replaces OEM Numbers: ARROWHEAD: LIA0005, ARROWHEAD (OEM): MM225, J & N: 430-29013, LETRIKA (ISKRA) AFTERMARKET: IM 0172, LETRIKA (ISKRA) DESCRIPTION: AME1614, AME1643, AME1720, LETRIKA (ISKRA) OEM: 11.212.159, 11.212.334, 11.216.238, MAHLE: MM225, SPX FLUID POWER: MF-4042, WESTERN MOTORS: W-8055
• 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.
• 100% New aftermarket Hydraulic Motor built to meet OEM specifications

User questions & answers

Question:	looking for a repl. motor for rv hwh hydrolic pump
Answer:	the continuous flow is 696 Rpm and the intermittent flow is 1130 rpm
Question:	What are the dimensions? I need to replace my leveling jack motor that is Lippert
Answer:	Buyers Products does not offer seal kits for this motor.

Product description

RCPW Hydraulic Motor replacement for Buyers SaltDogg, Char-Lynn, Flink, Meyer, Swenson and more!

• Replaces Buyers SaltDogg CM004P and 3009305, Char-Lynn 101-1001-009, Flink 462-1, Meyer 60324 and Swenson 04101-035-00
• Fits Buyers SaltDogg 2.5 - 16 cubic yard hydraulic conveyor salt spreaders and 7 - 10 cubic yard hydraulic auger salt spreaders
• Continuous Flow Rate: 12 GPM, Continuous Pressure: 1800 PSI, Continuous Torque: 650 in-lbs. Maximum Speed (Continuous): 969 RPM
• Intermittent Flow Rate: 14 GPM, Intermittent Pressure: 2400 PSI, Intermittent Torque: 876 in-lbs.
• Port Size: 1/2" NPTF, Shaft Keyway: 1/4", Shaft Size: 1", Shaft Type: Straight

Product description

10 Quart Double Acting Hydraulic Power Unit with Hydraulic Gauge

It has unique features among the other hydraulic power unit on the market, with a powerful double acting hydraulic cylinder pump and advanced brass pressure gauge.



Sturdy & Durable

This 10 Quart Hydraulic Pump Unit, made with high-quality stainless steel. More wearable and durable. With pressure safety valve to avoid overpressure damage.



Double Acting Up & Down

The dump trailer hydraulic pump is a double acting electric hydraulic pump, with double acting power up & down, and 1500 PS Max Relief Setting on B port; 3200 PSI Max. Relief Setting on A port.



Quick Oil Output

10 Quart Metal Reservoir standard duty 12V DC motor; Horizontal mount; hand-held pendant with 20-foot removal cord and start solenoid. Capable of quick oil output.



Rapid Start

The motor is built to last, and the tank is buit to not crack & leak under harsh conditions. Its high-quality starter ensures a life long service time and a fast-starting for each time.



Full-Set Equipment

Equipped with a hydraulic pressure gauge, which can accurately display the pressure value and with a remote control in long-distance use. Other parts: a hydraulic pump, DC motor, function valves & oil tank.



Wide Application

It is widely used as the power resource for lifting and pushing devices. Usually used with dump trailers, dump trucks and so on.



Specification

Quart: 10 Quart

Reservoir: Metal Reservoir

Motor voltage: DC12V

Acting: Double-acting

Interface: sae6

Horizontal mount

1500 PS Max Relief Setting on B port

3200 PSI Max Relief Setting on A port

Handheld pendant with 20-foot removal cord and start solenoid.



Package Content

1 x 12V DC 10 Quart double-acting power unit (with a pressure gauge)

1 x Remote controlled pendant

1 x set of sae6 interface

1 x set of seal ring & gasket

• 【UPGRADE HYDRAULIC POWER UNIT】- The upgrade electric hydraulic power unit has distinctive features among any other hydraulic power unit. It has a powerful hydraulic pump and equipped with a hydraulic pressure gauge, which can accurately display the pressure value and estimate the weight of the lifting object.
• 【DOUBLE ACTING & FAST START】- The dump trailer hydraulic pump is made by stainless steel and is built for durable usage. With double acting power up & down, 3200 PSI Max. Relief Setting for Increased Lifting Power on A port; 1500 PS Max Relief Setting on B port. It offers you a fast start every time and a long using period.
• 【EXCELLENT OIL OUTPUT】- This hydraulic dump trailer hydraulic pump with 10 Quart Metal Reservoir standard duty 12V DC motor; Horizontal mount; hand-held pendant with 20-foot removal cord and start solenoid. It can work excellent, not crack or leak even in a harsh environment.
• 【FULLY EQUIPMENT】- Dump hydraulic power unit has a hydraulic pressure gauge, monitoring the pressure & remote controlled pendant manipulating in a long distance. it also consists of hydraulic gauge, high-pressure gear pump, DC motor, multi-purpose integrated block, various function valves, oil tank, and other components.
• 【VARIOUS APPLICATION】- Hydraulic power unit is widely used as the power resource for lifting and pushing devices. Also used in places where extending a hydraulic cylinder is needed, scissor lift, dump trailer, dump trucks, RV's, boat lifts, lift gates, tow trucks, wreckers, car haulers, agriculture equipment.

User questions & answers

Question:	How would you know how much the pump would lift ?t
Answer:	I would think yes as long as the fill is still on top...

Product features

Sturdy & Durable

This 10 Quart Hydraulic Pump Unit, made with high-quality stainless steel, has distinctive features in the application. More wearable and durable. With pressure safety valve to avoid overpressure damage or extremely pressured.

Double Acting Up & Down

The dump trailer hydraulic pump is a double acting electric hydraulic pump, with double acting power up & down, and 1500 PS Max Relief Setting on B port; 3200 PSI Max. Relief Setting for Increased Lifting Power on A port.

Quick Oil Output

10 Quart Metal Reservoir standard duty 12V DC motor; Horizontal mount; hand-held pendant with 20-foot removal cord and start solenoid. Capable of quick oil output.

Rapid Start

The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions. Its high-quality starter ensures a life long service time and a fast-starting for each time.

Full-Set Equipment

Equipped with a hydraulic pressure gauge, which can accurately display the pressure value and with a remote control in long-distance use. With other parts like a hydraulic pump, DC motor, multi-purpose integrated block, various function valves, and oil tank.

Wide Application

It is widely used as the power resource for lifting and pushing devices. It is reliable and durable units in the industry for use with dump trailers, dump trucks, RV's, boat lifts, lift gates, tow trucks, wreckers, car haulers.

10 Quart Double Acting Hydraulic Power Unit with Hydraulic Gauge

It has unique features among the other hydraulic power unit on the market, has a powerful double acting hydraulic cylinder pump, advanced brass pressure pump, and remote control, working excellent in lifting and pushing devices like dump trailer, lift gates, and tow trucks.

• ✅SECURE ELEVATION: A must-have for sport or dirt bike enthusiasts. The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.
• ✅SAFETY FOOT STEP LEVER: The large foot step lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease.
• ✅SOLID CONSTRUCTION: The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.
• ✅PORTABLE CONVENIENCE: The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.
• ✅NON-SLIP DESIGN: Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage. Safely holds up to 300 pounds.

User questions & answers

Question:	If you changed out the hydraulic jack would the Aussie lift rise any higher
Answer:	The devices which we are currently selling are October 2017.
Question:	What is the highest distance for that lift
Answer:	Unfortunately only US units are allowed to be sold in the US. Thank you
Question:	Can i use this to put the bike in my pickup truck if the truck bed height is lower than 36 inches
Answer:	The price is usually around 1/3 of the full price, but it will depend on the conditions of your beacon once it's sent to the battery replacement center. If you are in an emergency you can just notify the manufacturer and they should replace it for free.
Question:	Anyone have thoughts about using this as a transmission jack
Answer:	Unfortunately no. Every unit sold in the US is built with a US code.

Product features

Durhand 36” Foot Step Hydraulic Pump Lift for Small Motorcycles and Dirt Bikes

Bike maintenance and repair is a daily ritual for most riders, and knowing that your lift can keep up with your consistent schedule is important. Durhand’s adjustable lift features a non-slip rubber top, hydraulic foot step lever, and a portable 4- wheel design that will keep you riding. This portable lift is a convenient size, and the 4 easy to maneuver wheels help you take it from the garage to the track, the shop, or the trail. A sturdy steel frame, powder coated for rust and corrosion resistance, gives this lift strength, durability, and longevity. With a large surface area, topped with non-skid rubber padding, your bike will sit fully elevated with no slipping. We know you love your bike, so let us help take some of the stress out of your maintenance routine when you use our adjustable lift from Durhand.

Secure Elevation

A must-have for sport or dirt bike enthusiasts! The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.

Safe and Sturdy

The large footstep lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease. Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage.

Solid Construction

The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.

Portable Convenience

The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.

Features

• Large top surface lifts your bike off of the ground for better access for maintenance and repair
• 4 wheels make this lift easily portable from the garage to the track, shop, or trail
• Constructed from durable steel
• Hold up to 300 lbs
• Large hydraulic foot step lever design promote safety
• Non-skid rubber padding on the top surface will keep your bike from slipping off

Specifications

• Material: Steel, Rubber
• Color: Blue
• Overall Size: 17.75" L x 15.75" W x 36.5" H
• Top Size: 16.5" L x 13.75" W
• Adjustable Height: 13.75" - 35.5"
• Net Weight: 60 lbs.
• Weight Capacity: 300 lbs.
• Accessories Included: 2 U-type hooks, foot step pedal lever, rubber foot pad, 2 hooks, long rod

Product description

KMD-1 12V Motor for SPX Stone and Fenner hydraulic power units. This is a single terminal motor, with a 9-spline shaft. A shaft coupler is included in this kit.

• AC 12V MOTOR
• CLOCKWISE ROTATION
• 9 SPLINE SHAFT
• FITS MANY SPX HYDRAULIC POWER UNITS

User questions & answers

Question:	What is the rpm of This motor
Answer:	I cant answer your question directly as it is now installed and measurements are not possible however I ordered this pump as a replacement for my HWH Motor Home leveling system and it worked perfectly for less then half the cost of a factory replacement
Question:	I need coupling for this motor
Answer:	I can't answer that, I bought for someone else.
Question:	What is the part number for the motor brushes
Answer:	Yes
Question:	Is this motor the same as a Stone
Answer:	Part# CM004P has a 1" diameter straight shaft with 1/4" woodruff keyway.

Product description

**Verify part fits before purchasing**

Specs:

Unit Type: Pump Motor

Voltage: 12

Rotation: CCW

KW: 1.7

Replaces OEM Numbers:

ANTHONY: A150018M

ARROWHEAD: LPL0023

BUYERS: 1303600

DELAMERICA: 20415

EAGLE DC MOTORS: 1330180

J & N: 430-20034

JS BARNES: 220-0480

LESTER: 10728

LEYMAN: LH150018

MAXON: 223740

MONARCH: 8111

NATL LIFTGATE PARTS: BMT0022, BMT0027

PRESTOLITE: 46-2617, 46-2777, MUE6001, MUE6001S, MUE6105, MUE7003, MUE7003S

REFERENCE NUMBER: 92200480

SNO-WAY: 96105233, 96106802

THIEMAN: 4421721, 4423520

TOMMY LIFT: 42 MONARCH, 42-4320

WAI: 6126DBBN

WALTCO: 70091739, 70092312, 70092359

WESTERN MOTORS: W-9000

Compatible With/Replacement For:

JS BARNES: Various Models

MONARCH: Various Models

MTE HYDRAULICS: Various Models

• Spec: Unit Type: Pump Motor, Voltage: 12, Rotation: CCW, KW: 1.7
• Replaces OEM Numbers: ANTHONY: A150018M, ARROWHEAD: LPL0023, BUYERS: 1303600, DELAMERICA: 20415, EAGLE DC MOTORS: 1330180, J & N: 430-20034, JS BARNES: 220-0480, LESTER: 10728, LEYMAN: LH150018, MAXON: 223740, MONARCH: 8111, NATL LIFTGATE PARTS: BMT0022, BMT0027, PRESTOLITE: 46-2617, 46-2777, MUE6001, MUE6001S, MUE6105, MUE7003, MUE7003S, REFERENCE NUMBER: 92200480, SNO-WAY: 96105233, 96106802, THIEMAN: 4421721, 4423520, TOMMY LIFT: 42 MONARCH, 42-4320, WAI: 6126DBBN
• Compatible With/Replacement For: JS BARNES: Various Models, MONARCH: Various Models, MTE HYDRAULICS: Various Models
• 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.
• 100% New aftermarket Pump Motor built to meet OEM specifications for Js Barnes, Monarch, Mte Hydraulics

User questions & answers

Question:	need a electric motor for a monarch dyna jack ser# 95637559 model 4-304-0230 this goes on a woodmizer saw mill
Answer:	There are no parts available for these - they are throw away units.
Question:	I have the Monarch 8111-E. Wondering what the difference is and if these also have 4 field coils
Answer:	The 2010219 motor is 208/230 volts AC. The KMD1 kit contains a motor which is 12 volts DC. So, no, they are not the same.

Product features

DB Electrical

DB Electrical is your go-to source for quality electrical parts for vehicles of every shape and size – from motorcycles and ATVs to cars, trucks and boats. Our engineers work in close partnership with leading factories to develop electrical components that perform and fit to OEM standards.

Selling from the Heartland of America

Located in Kingsport, Tennessee, the people of DB Electrical make it their goal is to get your vehicle back on the road, field, trail or water. They take great pride in providing top-quality products that keep you moving forward.

Proven to Perform

From interstate highways to gravel country roads and dirt trails, vehicles of all types are performing flawlessly thanks to quality parts from DB Electrical.

Fast Delivery

DB Electrical keeps parts stocked so they are ready to ship when you place an order, getting you up and running all the sooner.

Priced to Please

With prices that often save you up to 30% over OEM, DB Electrical parts are manufactured to OEM specifications for outstanding performance.

Production Partners

DB Electrical works closely with factories in the design of its parts, never simply buying excess inventory in the marketplace like some sellers do.

Product description

Get your RV’s leveling system up and running again with our hydraulic pump replacement motor.Constructed with heavy-duty materials, our replacement motor is built for the long-haul, so you can get back to leveling your RV worry-free. Plus, it’s backed by a reliable one-year manufacturer’s warranty for added peace of mind.

• PERFECT MATCH. Get your RV’s leveling system operating again with this hydraulic pump replacement motor. Works with numerous unidirectional power units for Lippert leveling systems.
• EASY INSTALLATION. Built with minimal components and only four connection points, this motor is simple to install so campers can quickly get back to leveling their RVs with ease.
• RELIABILITY. Powered by a name campers trust.
• LEVELING SYSTEM COMPATIBILITY. Before purchasing, check with your RV manufacturer or review your owner’s manual to ensure this replacement motor works with your Lippert leveling system.
• RECOMMENDED. For better installation, it’s recommended that this part be purchased with a sealed coupling component — SKU 286722.

User questions & answers

Question:	Does this work on the vertical System
Answer:	I used it on a snow plow
Question:	Does the recommended sealed coupling SKU286722 come with this purchase
Answer:	No difference, and yest it has 4 field coils.
Question:	is there anyway I can fine the brushes for the 179327 the pump works good but I have to manually start spinning it with a drill
Answer:	I tried to find it on the spx fenner stone web site but no specs were noted. The 2.5 gpm pump is what will make the cylinder move very fast.
Question:	Does this motor replace motor with
Answer:	Amazon sells the coupler with the motor. They should be able to identify the coupler's part number and get you one.