13 best truck bed paint liner

Product description

Rust-Oleum Automotive Truck Bed Coating Spray is a textured finish that forms to the contours of a truck bed. For recoating and restoring worn, unfinished or previously finished metal truck beds. Helps prevent truck bed damage caused by scratches, rust and weather. Also ideal for running boards, bedrails and more. Use outdoors or in a well-ventilated area.

From the Manufacturer

Rust-Oleum Truck Bed Coating is an easy to use spray on coating that provides a durable, abrasion resistant, textured, non-skid finish to truck beds.

• Ideal for use on truck beds, trailer floors, fenders and other metal surfaces
• Stops Rust formula provides long lasting protection with any-angle spray comfort tip that reduces finger fatigue and makes it easy to reach hard to paint places
• Dries to the touch in 1 hour and covers up to 20 sq. ft.
• Offers superior durability and can be used on bare or primed metal truck beds
• Textured non-skid finish is resistant to scratches and the outdoor elements
• Conforms to the exact shape of the truck bed
• Reduces road noise

User questions & answers

Question:	How is the odor/fumes? I plan on using this in a engineering lab to paint some machines and the ventilation isn't the best
Answer:	About the same as any spray product like paint or under coating.
Question:	Will this adhere to wood as well. Would consider using this on the ramp of my toy-hauler
Answer:	If you can get it to spray it will. This product is crap and has been for years. Read some of the one star reviews. They speak the truth. Try DupliColor spray bed-liner. It is far superior.
Question:	Could this product be used as a floor covering for a mop room
Answer:	no too abrasive
Question:	Could this be used to paint a small sub box
Answer:	well as long as its metal i think you should be fine but wood i really could not say

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.

Product description

Herculiner brush-on truck bed liner kit includes the following: one gallon of ready-to-use protective coating, one application brush for tight spots and corners, two rollers for easy/even application, one roller handle, and one abrasive pad to prepare truck bed. It has polyurethane and rubber granule coating that is applied in just 3 easy steps to the bed surface using the rollers and brush included with the kit. When cured, it provides a durable skid-resistant protective coating. Because it can bond to virtually any surface or material, Herculiner can be applied to wood, metal, concrete, aluminum, asphalt, rubber, fiberglass, and most plastics, including PVC.

• Herculiner, brush on bed liner Kit, includes 1 gallon of ready to use Black protective coating, application brush, 2 rollers for easy & even application
• Adds Extra shine to your product
• Manufactured in China
• Apply to metal, concrete, wood and more
• Tough, textured polyurethane protective coating
• 5 times thicker than other roll-ons
• Skid resistant surface which wont chip, flake, or peel

User questions & answers

Question:	I have a 2001 Dodge Dakota sport Ext, Cab w/ 6-1/2 ft' bed. I want to do the bed, sides and tail gate. Would 1 gal. be enough
Answer:	If your 2021 2.7L has a 5" exhaust the tip will fit on it. I doubt the 2021 2.7L has a 5" exhaust from the factory.
Question:	Can I do a recoat over my old herculiner
Answer:	If your ram 1500 has a 5" exhaust on it the tip will fit.
Question:	is Herculiner the same exact product as Rhino liner? Is Herculiner better than Line-X
Answer:	Yes , I applied it to my exhaust and mufflers !!!!!
Question:	How much coverage
Answer:	I have had on header on a atv for 6 months and still looks like new so I have to yes

Product features

Herculiner Brush-on Bed Liner Kit

Herculiner Brush-on Bed Liner is a polyurethane-based product that is designed to be easily applied to any truck bed with great results. It is important that you follow the application instructions as closely as possible. Any deviation or deletion from these application instructions may have a negative effect on the end results. Be sure to read all instructions and warnings completely before beginning.

Product description

Rust-Oleum Professional Grade Truck Bed Liner Kit provides an easy, do-it-yourself solution to protect auto bed liners, terraces, walks, decks, work areas and a variety of surfaces. Premium, ultra durable epoxy kit features cross-linking technology with a convenient burst pouch for simple mixing. Ultimate protection for DIY automotive application with 4X more impact resistance than Rust-Oleum Truck Bed Gallons and extended service life of any truck bed mat.

• Pro grade truck bed kit protects a full 8 ft. truck bed with maximum durability
• Durable epoxy formula offers superior bed liner protection to extend truck service life
• Protective coating covers up to 100 sq. ft. per kit, walk on ready or light duty use after 24 hours
• Cross linking technology creates a premium, impact resistant barrier against rust, water and abrasion
• Easy to apply, textured finish provides anti skid surface for cargo beds, ramps, running boards and more

User questions & answers

Question:	Does this stick to aluminum
Answer:	No primer needed. Just use the scuff pad provided in the kit or sand paper or anything to rough up the paint and apply. I used an electric sander on my truck and it stuck much better than the scuff pad allowed it to
Question:	Can this be top coated with urethane paint
Answer:	We did not use it for the truck bed but for a wood bridge so my horses would not slip going over it. It was warm when we put it on and has lasted fantastic with them walking on it every day.
Question:	Been waiting on this order for almost two months now.. anyone else have this shipping issue
Answer:	Hello. I got this to find out how well it covered. Still unused. If say 4ftx4ft 1/8 inch if I had to guess. May hv to try it out today. It's sunny.

Product description

This product is a thick, durable Black sealant that forms a protective skin that is both tough and flexible. Protects against corrosion and abrasion, withstands impacts, provides improved traction, and resists water. With its fast cure time and excellent adhesion, truck bed liner greatly extends Equipment and vehicle life expectancy.

• Suggested uses: truck beds, trailers, vehicle panels, wheel wells and repair existing liner coatings
• Thick and durable Black sealant that forms a protective skin that is both tough and flexible
• Protects against corrosion and abrasion, withstands impacts, provides improved traction, and resists water
• Fast cure time and excellent adhesion
• Greatly extends equipment and vehicle life expectancy

User questions & answers

Question:	is it possible to use this as an engine hood liner on my SUV? will it resist engine bay heat
Answer:	Yes it will.
Question:	Does gasoline exposure affect this coating
Answer:	The chrome would need to be removed for proper adhesion. It will stick for a short amount of time but not long.
Question:	Will it stick to chrome if I scuff it
Answer:	Krylons item description says yes. But I don’t no have any experience using it on stainless.
Question:	Will this adhere to aluminum
Answer:	No

Product features

Seymour 20-041 Truck Bed Coating

This product is a thick, durable black sealant that forms a protective skin that is both tough and flexible. Protects against corrosion and abrasion, withstands impacts, provides improved traction, and resists water. With its fast cure time and excellent adhesion, Truck Bed Liner greatly extends equipment and vehicle life expectancy.

Suggested Uses:

• Truck beds
• Trailers
• Vehicle panels
• Wheel wells
• Repair existing liner coatings

User questions & answers

Question:	What colors are available
Answer:	black and tintable
Question:	I did a coat of raptor liner about 24 hours ago but need to do some touch up work or another coat.? What all do I need too do
Answer:	You can just go over it. Not going to mess it up.
Question:	I want to do a Chevy Avalanche top to bottom and all the plastics on it as well. How much will i need to get
Answer:	I did an entire Dodge Ram 2500 with a utility body. I used two kits of the tintable and two kits of the black.
Question:	do you provide tint? and have a color chart
Answer:	Rsptor Liner has some colors of tint available. I got our tint from Monstaliner because Raptor did not have what we wanted. You will have to go to their website. The Raptor Liner worked great with the Monstaliner tint.

Product description

Truck Bed Coating, Black, Container Size 1 qt. , Coverage 35 to 40 sq. ft. , Dry Time 4 hr. , Textured Finish, VOC Content 619g/L, Application Temperature 55 Degrees F, Application Method Roller or spray'

• Flash point: 31.0 degrees_celsius
• Prevents truck bed damage caused by scratches, rust and weather, while also enhancing your vehicle's appearance.
• Textured finish that forms to the contours of a truck bed
• Stops Rust formula
• Able to be rolled on or brushed on
• Also ideal for running boards, bedrails and more

User questions & answers

Question:	can this be painted or coloured readily
Answer:	Yes
Question:	How much prep work has to be done before application
Answer:	You just have to stir it up and use. No additives to mix in.
Question:	Does this product require a hardener? Can it be reused after opening
Answer:	Ye. but You still have to sand it a little so you can apply it correctly.
Question:	How well will this hold up for the interior of a jeep? Thanks
Answer:	Someone else answered “this paint is designed for metal”, but as an industrial painter, I would argue that this paint would bond amazingly well to wood. The porous nature of wood along with the thick and textured nature of this paint would create a very good mechanical bond when applied. Obviously some woods are more porous than others, so it may adhere to a soft wood like pine much better than a very dense wood like teak. Porosity aside, if you sand the wood very well with coarse sandpaper like 80 grit, you would still achieve an excellent bond. I would not use any sort of primer on the wood prior to application, however, don’t be surprised if the wood soaks up some the initial first coat. Cheers

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.

Product description

Rust-Oleum Truck Bed Coating provides an easy solution for recoating and restoring worn, unfinished or previously finished metal truck beds. Designed with Stops Rust protection, the non-slip coating offers a fresh new look for your vehicle with excellent durability through the seasons. Apply on any metal truck bed or other metal trim including running boards, bedrails and more for a premium finish.

• Creates an attractive liner that prevents damage caused by scratches, rust and weather with a durable, protective coating
• Truck bed liner in a fast dry, water-based formula forms to the contours of the truck bed and protects with ultimate rust and abrasion resistance
• Dries to touch in 1-2 hours and covers up to 40 sq. ft. per quart
• Truck bed paint is easy to apply by spray, brush or roller to recoat or restore any metal truck bed
• Create a custom truck bed mat on painted or bare metal with a non-skid, textured finish

User questions & answers

Question:	This product it's water safe after it dries
Answer:	Metallic silver? Doubt it...just the color.Hi-Heat CoatingTo finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating.The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seals the pores to minimize the penetration of harmful liquids. Hi-Heat Coating can handle direct and continuous heat of 2000 degrees Fahrenheit when used with ThermoTec Exhaust Insulating Products.The coating also works excellent as a paint directly on metal surfaces and can handle continuous temperatures up to 1200 degrees Fahrenheit.
Question:	I ordered the application kit, and two quarts of the product...do I just mix and use or is there an additive or catalist that must be mixed in it
Answer:	No, it will look like shiny silver paint.
Question:	Can this be applied on top of the original paint
Answer:	After you wrap.
Question:	Can this be used on wood
Answer:	Yes. According to DEI it's safe to use on all exhaust system alloys except for actual Titanium exhaust systems, which is heller expensive and not common. All but 1 header I've put on my 4 cars( 2 V-6's, an I-4 & turboed I-4) and the 5 Jeeps(1 w/old 4.2L I-6, 3 with 4.0L HO I-6, & a 4.7L V8) were made of either 14 or 16 gauge T-304 Stainless Steel, only had 1 that wasn't & was a mild steel(never use 1 made of anything but SS or Titanium!!!). Ever since that header, I vowed I'd only use a Stainless Steel header from then on, lol. It cracked just like the plagued/known to crack factory I-6's exhaust manifolds, it just took about 7K-10K miles more(so not worth the $). Most headers I've seen(like 95%) are stainless steel anyway, and so are many aftermarket cat & axle back exhaust systems.

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.

Product description

Rust-Oleum Automotive Professional Grade Truck Bed Coating offers a high-performance, multipurpose coating capable of protecting truck beds and other vehicle parts from corrosion and wear. Premium 2-in-1 paint and primer spray helps easily cover hard-to-paint curves and cervices with exceptional resistance to chips, fading, chemicals and abrasions. Easy spray on application produces an even, textured non skid finish.

• Ideal for protecting trucks beds and other automotive metal from corrosion and wear
• 2-in-1 paint and primer offers excellent protection from rust, fading, chipping, impact, abrasion and more
• High performance coating dries in 1 hour and covers up to 7 sq. ft. per can
• Durable rubberized coating delivers long lasting protection and maximum adhesion
• Creates a textured coating with non-skid finish

User questions & answers

Question:	If the roof basket have rust , do i need to use rust reformer first before apply bedtruck
Answer:	We work hard to make sure our products are safe to use in homes with pets. We just recommend ensuring the fabric is completely dry before allowing your pet to lay on it again.

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.

Product description

Kit Contains:

4 - 750Ml Bottle Of Black Truck Bed Liner Base

1 - 1L U-Pol Raptor Standard Hardener

Includes Free Application Gun ($30.00 Value)

Mixing Ratio: 3:1 Truck Bed Liner Base: U-Pol Raptor Standard Hardener

U-Pol Raptor Bed Liner & Texture Coating Is A 2.1 Voc 2K Protective Urethane Coating Manufactured For The Application To Truck Beds, Wood, Concrete, Metal, Aluminum, Fiberglass, And On Most Oe Manufacturer'S Finishes. U-Pol Raptor Is Easy To Use. It Protects Against Rust And Corrosion, And Has Excellent Uv Protection. U-Pol Raptor Can Be Applied With A Schutz Gun. Simply Add Hardener, Shake And Spray. It Can Also Be Rolled Or Brushed On.

Tough, Durable 2 Part Urethane Coating(Also Available In Tintable In A Separate Listing)

Benefits:

- Easy To Use: Add Hardener - Shake - Spray

- Enough Material To Re-Spray The Largest Truck Beds

- No Need To Wax After Application Abrasion And Stain Resistant

- Protects Against Rust, Corrosion Salt, Damp & Extreme Temperatures

- Waterproof, Flexible, Helps Deaden Sound & Vibrations

- Apply With Shutz Gun, Roller Or Brush To Obtain Different Textures

- Provides Excellent Adhesion

Preparation: U-Pol Raptor Truck Bed Liner Can Be Applied To Most Original Manufacturers Finishes. The Surface Should Be Lightly Scuffed, And Free From Dirt And Rust. For Best Results Bare Metal Should Be Treated With A Suitable Etch Primer E.G. U-Pol Acid#8 (Up0776/ Up0741)

• Easy To Use: Tint - Add Hardener - Shake - Spray
• Enough Material To Re-Spray The Largest Truck Beds
• Abrasion And Stain Resistant
• Protects Against Rust Corrosion Salt Damp & Extreme Temperatures
• Waterproof Flexible Helps Deaden Sound & Vibrations

User questions & answers

Question:	How hard of a shell does this form? I'm thinking of using to coat the bottom of my kayak and wondering if it will hold up against hitting rocks
Answer:	I don't think so. I did a 5'x8' trailer bed, no sides or tailgate, and I used every drop of the 1 gallon can I bought.
Question:	Will this be enough to paint a metal bumper ? Already have it etched
Answer:	yes you can. I just redid the bed of my truck. used Lacquer thinner to prep it, then did 2 new coats on the bed walls and did 2 new coats on the bed. I use this stuff for everything and have found that if you paint over (Rattle cans) it as it tacks up, you get a nice glossy finish that lasts. The UV on the Herculiner isn't that good, But if you paint over it as it tacks it gives it the UV protection it is lacking. Did my sons off-road bumper, rock rails, and the entire interior floor 3 years ago still looks great.
Question:	How many cans would I need to cover a mini van? Body, undercarriage, hubcaps, and floor inside
Answer:	Two different mediums and two different application processes. Line-X is a professional / dealer applied finish... whereas Herculiner is a DIY product. I'm a firm believer that Herculiner is one of, if not, THE best DIY liner products out on the market. Better than Line-X? Maybe not. Best bang for the buck? Yes. Follow the directions and be critical of the prep process. Herculiner will serve you very well and turns out great.
Question:	Is 4L enough to do the inside cab of a full size bronco and large off road front bumper
Answer:	One gallon will easily put two heavy (rolled on) coats on a six foot pickup bed!

Product description

PlastiKote has you covered for your automotive paint, specialty paint, automotive touch up and scratch repair needs!

• 15 oz. can of do-it-yourself spray on truck bed liner
• Unique formula dries to a tough, non-skid surface that will not warp or crack and is gasoline resistant
• Flexible, textured surface minimizes cargo slipping, resists fading and withstands extreme temperatures
• Water-based quick drying formula for use on OEM factory-painted truck beds
• Also available in gallon size

User questions & answers

Question:	Would this be good to use for a cover on tailgate I don't use it a lot but need some protection
Answer:	Yasss!!!! This stuff is awesome. The only real work i had to do was scuffing out a patch of rust. You need a couple layers. But one can was more than plenty for my Chevrolet Silverado 2500 HD Crew Cab. I was able to go over it two times. I used it in my heated garage. So the drying time was quicker.
Question:	Can you paint over chrome with it? How should you prep the surface
Answer:	You will have to scratch the entire surface for the paint to stick. Us a Carbon scuffing wheel, or maybe course grit sand paper.
Question:	How is the durability of this product? i have a 2007 xl7. thinking about spraying stock fender flares and ground effects
Answer:	I sprayed it on my tailgate of my truck about six months ago and is holding up well. You want to sand whatever you spray first too get a good bond.
Question:	Im primarily looking to stop reflection off the hood of my car. Will do the job? Thanks
Answer:	It should stop reflection. Just make sure you clean the surface and sand it really well with coarse sandpaper before you apply the bedliner.

Product description

The Dupli-Color Scratch Fix All-in-1 touch-up tool features an abrasive prep tip, exact-color match paint, and clear coat. We are the only brand with colors tested and approved by vehicle manufacturers for a perfect match to the original factory finish when restoring that scratch or chip. The New Scratch Fix All-in-1 tool helps you fix it easy and fix it right in your garage.

• The Dupli-Color Scratch Fix All-In-1 Touch-Up Tool Features An Abrasive Prep Tip, Exact-Color Match Paint, And Clear Coat
• We Are The Only Brand With Colors Tested And Approved By Vehicle Manufacturers For A Perfect Match To The Original Factory Finish When Restoring That Scratch Or Chip
• Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories

User questions & answers

Question:	is the texture really coarse or can it be made into the texture you want
Answer:	I'm almost positive that it can be painted once it has dried and has cured. It dries very hard. As far as coloring I don't think that would be possible.
Question:	Do you need a primer
Answer:	Not much ... wash - dry - rough sand. This has a rust stopper too so some remaining solid rusty surface is fine - but be sure to remove any loose rust and sand well.
Question:	how warm does it have to be to put it on
Answer:	Does not require a hardener. Not sure about the shelf life. It’s not a very big can. I had some scratches and wear so I used the entire can to recover the bed. It was barely enough to do the job.
Question:	how much surface does 1 can of this duplicolor bedliner spray cover
Answer:	I used it on the interior and roll cage of my off road truck and it works great. Lay down a couple of coats (I did 4) and good to go. It withstands rock scratches, tree scraps for the most part, and best of all I can just wash it out. It's not rough like rhino liner or herculiner it has a relatively smooth finish.

Product features

Bed Armor Truck Bed Coating Aerosol

Just like the Bed Armor Truck Bed Coating Kit, Bed Armor Aerosol is a water-based polyurethane formulated with ground up rubber particles to provide uniform texture and skid resistance - it’s easy to use and offers the same durability and protection. Bed Armor Aerosol won't chip, fade, or flake and has a textured, black satin finish to fully protect your truck bed - and any wood, concrete, fiberglass or metal surface.

• Custom Coat Aersol Sprayable Truck Bed Liner - Extra Large 16.5 ounce Spray Can - provides a black matte, textured, non-skid finish for Truck Beds, Tailgates, Bed Rails and Running Boards. Easy to use aerosol spray can.
• Custom Coat Aerosol Bedliner Gives faded bed liners new life, repairs Spray-in Bed Liners, durable and abrasion resistant, textured non-skid finish
• Protects against corrosion and abrasion, withstands impacts, provides improved traction, and resists water
• Flat fan high atomization nozzle offers a large fan pattern and excellent coverage
• Versatile: Can be easily applied to many other surfaces such as concrete, plastic, rubber, metal, wood or fiberglass to achieve a Textured satin black finish

User questions & answers

Question:	Do you have to shakebthe can
Answer:	4", 5", and 6"
Question:	Can i apply this over plasti dip
Answer:	These are flat on the bottom but grout typically is "indented" a bit. It would be easier to use your (wet) finger or the bottom of a spoon to press in the grout.
Question:	how cold a temperature can you still use this product
Answer:	Not fully understanding the question, if you can use the spreader to fix a cabinet, the spreader will add no value to strength or structure to a cabinet. The spreader is used to spread body filler and glazes on surfaces.
Question:	Last owner did a crappy job on my truck bed. What do I need to do to make sure this looks good sprayed over it
Answer:	This is a simple piece of hard plastic. Not flexible.
Question:	Can u paint over it? I want to do my botton half on my f
Answer:	Yes, you can drive muddy areas in the quagmire. If you are in the snow, it may test your operating ability~ If you need other help, please contact our customer service team email, we will reply you within 24 hours. Thank you. Good Luck!
Question:	Would this work with a jon boat
Answer:	I am sorry it is not waterproof. It is ok if it is splashed with water, but the inside should not get wet.
Question:	Can I use a paint gun to spray it on
Answer:	Hello, this remote control car is equipped with a high-quality 380 motor. The remote control is equipped with a speed ratio adjustment. The adjustment ratio will directly affect the speed. When adjusted to the highest speed, it can reach 40KM/H. Good Luck! VRG Customer Support Team
Question:	Need the sds for this rtg truck bed liner paint
Answer:	Hello, this remote control car is equipped with a high-quality 7.4V 1200mAh lithium battery. When the battery power reaches 100%, the running time is 20 minutes in the highest performance state, 40 minutes in the medium performance state, and 60 minutes in the low performance state. Please note: the battery power of the new car is not 100%. Please fully charge the battery before use. Good Luck! VRG Customer Support Team

Product description

The convenient RAPTOR 2K Berliner Aerosol offers a fast, easy way to apply RAPTOR without compromising performance, no spray equipment necessary. Ideal for spot repairs and small jobs. More than just a bed liner, RAPTOR is a highly durable and tough protective coating. Use RAPTOR on a variety of surfaces that need a protective barrier that withstands the toughest situations. Using RAPTOR is easy - Now you can spray RAPTOR 2K Berliner Aerosol for a no mess, no clean-up application. It’s easy!

• Convenient, offers a fast, easy way to apply RAPTOR without compromising performance, no spray equipment necessary
• This colored bed liner spray can is ideal for spot repairs and small jobs
• Use RAPTOR on a variety of surfaces that need a protective barrier that withstands the toughest situations
• Now you can spray RAPTOR 2K Bedliner Aerosol for a no mess, no clean-up application
• The durability of RAPTOR with the convenience of an aerosol
• Easy and convenient - activate using the valve on base
• Textured “gun” finish

User questions & answers

Question:	Would this work well on a skid plate for the front of my 4Runner
Answer:	Yes, this digital caliper are made by high quality and durable stainless steel. With 5 times fine polishing, it was more durable than other plastic caliper and it will definitely show the precision measurements as you wish!
Question:	Does it leave a textured finish
Answer:	Three
Question:	Do i still need to use a primer with this
Answer:	Hello, our electric caliper measuring tool has auto-off function. It can automastic auto-off after 5 minutes of inactivity. You can slid the caliper to any points, it will start measuring.
Question:	I’m thinking of doing my tacoma bumper?will one can be enough
Answer:	Hello, the digital vernier caliper are required LR44 (1.5V) batteries. This is the steps of exchange battery: 1. Using the screwdriver provided to remove the screw on the two sides and pull out the battery. No need to loosen the screen located above the slide wheel! 2. Insert a new battery with the plus (+) side up. Replace the cover and reinstall the screw while holding it in place.

Product features

Benefits of Raptor 2K Aerosol

• The durability of RAPTOR with the convenience of an aerosol
• Easy and convenient - activate using the valve on base
• Textured “gun” finish
• No need for spray equipment
• Ideal for both consumers and professionals