13 best partsam led tail lights

• Package includes 10pcs 4 Inch Round Led Tail Lights; 4" Round Waterproof trailer light serves 3 functions: brake, tail, and turn. Recessed mount with built-in flange. Sealed Hardwired connection with 3 Stainless Steel Scres. 12 Super diodes. Red lens;
• Round trailer tail light serves 3 functions: Stop light, Tail light, Turn signal light; Size: 5.63" (outer) x 4" (inner) x 1.35" and the recommended diameter of the installation hole should be 4.2" approx. For more detailed information, please check the photos on the left;
• These Lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed, draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
• These round tail lights are not plug and play. They need to be wired with 3 wires connection system: Black wire for Negative, Red wire for Brake or Stop Light, and White wire for Tail/Running Light. Of course, the stop and tail functions will not be on at the same time;
• This 4 Inch Round LED Trailer Tail light is Universal fitment for any Vehicles with DC 12V such as Semi Truck & Trailer, Service Truck, Bus, motorhome, Boats / Marine, Service Van, Utility Truck, Parade Float, Horse Trailer, Utility Trailer, Pick Up Trucks UTE, UTV etc.

User questions & answers

Question:	do they plug in with a pig tail or do they have to be wired
Answer:	After looking to see exactly what Scentsationals Warmers you were referring to, I saw they are carried at Wal-Mart where I bought one. I actually bought these bulbs to replace the bulb in mine. To my knowledge these fit most all warmers as long as they are not the small direct-plug-in nightlight warmers.
Question:	What is the voltage these operate at
Answer:	Yes. I have it on daily and my wax is perfectly melted.
Question:	Do you have these in clear for a Backup light
Answer:	No handles. Glass globe with hole on top and bottom. Solar panel disc with on off buttons on back of disc which can fit in either top or bottom openings.
Question:	What size hole is needed for these to fit in
Answer:	Please remove the protective plastic sheet on the solar panel before first usage and keep the solar panel clean, put it under direct sunlight to get fully charged.

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Specifications

Features

Functions

Wiring Tips:

Black Wire is the Ground; Red Wire is the high brightness; White Wire is the low brightness.

• Package includes 2Pcs Universal Square 12V Combination 38 LED Signal Tail Light; Each one is equiped with 38 Super bright LEDs: 16 Red LEDs for stop/turn/tail functions, 18 White LEDs for backup function, 4 White LEDs for license illuminator; Both are set up for license plate lights as well as reverse lights;
• These rear combination tail lights have studs on back sticking out will bolt to any flat surface; This is not a replacement for Wrangler YJ CJ JK tail lights, not factory mount. If you want to install it on wrangler trucks, you may need some modification: There is no wiring harness so you have to splice the wires yourself. Also, The bolt holes are larger than stock so you will need to drill out your body to make them fit. The entire assembly is a touch larger than stock as well;
• DOT Compliant for street legal lighting. 12 volts; Low ampere draw; 3-stud mount design is easy to install on any vehicle exterior and the distance between the mounting blots is 2" ~ 2.2"; Resistant polycarbonate housing and acrylic lens provide weatherproof protection against water, shock & vibration;
• HARDWIRED with 4 color Wires: White Wire-Ground; White+Yellow, 18 white Leds work as back up light; White+Black, 16 Red Leds light up in low brightness + 4 White license illuminator works; White+Red,16 Red Leds light up in high brightness;
• This rear tail light is universal fit for 12V vehicles & trailers including trucks, short and extended trailers, Jeep vehicles, RVs, boats, vans, buses, flatbeds and more!

User questions & answers

Question:	How do you wire them
Answer:	Sure,it is wax warmer bulb
Question:	Does this fit into a 1999 international semi truck
Answer:	They are made in China,but they are delivered to you through Amazon
Question:	Are these stamped DOT
Answer:	No I kept mines but the scent is not as strong as I like to to the slow process in melting the was. Be warned that the warmer get very warm
Question:	I have seen a few people say they just used longer bolts with same thread. What thread? M6 x 1.0 does not work
Answer:	Just looked at box made in china

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Specifications

Features

Functions

Both left and right Taillight Conversion Kit has the license plate illuminator function

• WONDERFUL DESIGN: This Halo Glow Square Trailer Tail Light kit is visually distinctive from most normal square tail lights on market. The light gives your truck or trailer a distinctive look and it is completely street legal. Our Halo glow tail light has a unique solid light pattern when lit, so your lights stand out from the rest, adding both style and value to your truck or trailer.
• FUNCTIONS & LED: This Submersible Waterproof trailer tail light kit serves 7 functions: brake, tail, turn, side marker, side reflector, rear reflector, and license plate light; 32 Diodes ( 20 Red+8 Red+4 Red ) LED Combination stop turn tail light-Curb side; 38 Diodes ( 20 Red++8 Red+4 Red+6 White ) LED Combination stop turn tail light-Street side with license illuminator
• SEALED WATERPROOF TRAILER LIGHT & APPLICATIONS: The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board; Compliant with DOT standards, perfect replacement trailer lights for under 80 Inch width towing vechile, like boat trailer, RV, tractors, canoes,truck, trailer, bus, Lorry, Van, caravan, snowmobile etc.
• 3-WIRE PIGTAIL: This led trailer light kit has a 3-wire pigtail as pictured above. The pigtail hardwires into your trailer's wiring. The white wire is for the ground, the gary is for your tail lights, and the red is for your brake light and turn signal. This is a surface-mount light, so it will extend out from your trailer. The mounting studs are 2" apart on center.
• SURFACE MOUNT: These square tail lights are surface mount and protect the LEDs from shock and vibration better than through-hole technology because the diodes are soldered directly to the surface of a printed circuit board instead of attached with wires that run through holes in the board. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.

User questions & answers

Question:	Are there right and left lights in this kit
Answer:	Yes! They are the only ones I found other than what you buy direct for the warmer company that actually work! Great price!
Question:	Are these DOT approved
Answer:	Yes it has an E12 base! It's a standard size nightlight bulb!
Question:	Is the yellow Halo light for the turn signals only
Answer:	They shipped to me??

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Specifications

Features

Functions

-LED Combination stop turn tail side marker light-Curb side

-LED Combination stop turn tail side marker light-Street side with license illuminator

• Functions as clearance, side marker or identification light Brake, Stop, Turn, and Tail light.
• Universal for Semi Trucks & Trailers, Service Trucks, Buses, Service Vans, Utility Trucks, Parade Floats, Horse Trailers, Utility Trailers, Pick Up Trucks, and Much More.
• Powered by 40 high power NICHIA Super FLUX LED's emitters with 460 lumen lighting output
• Wire Connection Tips: White Wire is the Ground; Red Wire is the high brightness; Gray Wire is the low brightness.
• SAE Approved and complies with the DOT requirements

User questions & answers

Question:	Do they make these with clear lens
Answer:	Please measure the bulbs you are replacing.
Question:	What is the power draw (in watts
Answer:	No
Question:	Do they work as left and right running light, stop light and turn light all in one
Answer:	If you use the 15 watt you should be ok but most village bulbs are 7 watt so I wouldn't run them overnight or long period of time without checking with a pro
Question:	How long is the wire
Answer:	I'm not sure but they work and with the quantity it's worth the money.

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.
  
  
  
  
  
  
  
  
  
  
  
   

Specifications

Features

Functions

Wiring Tips:



White Wire is the Ground; Red Wire is the high brightness; Gray Wire is the low brightness

• Partsam 6" oval 6 LED red tail lights in smoke black lens are general purposed trailer lights which can be used as turn signal, stop brake lights, or just tail lights. These 6 inch oval LED tail lights are DOT approved and are submersible, making it suitable to be used on trailers transporting boats, jet skis, or in various other applications where the lights are expected to be exposed to water.
• 6 LED Diodes; Work on 12v DC, 3 wires with 2 steps Brightness , Can Modify for Signal Light , Flash Light , Emergency Light ( Flasher relay or Controler not included ); Please check the left detailed pictures for the dimensions
• Compatible with almost All automobiles and devices equipped with a 8-16 Volt DC power source such as Semi Truck, Semi Trailer, Service Truck, Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV Peterbilt, freightliner, international ,Kenworth, mack and lorries etc.
• EASY TO INSTALL: White Wire - Ground; Red Wire - high brightness; Black Wire - low brightness. Screws Specs: Cross recessed round head tapping screws 4*30;
• We can't wait to add you to our long list of customers mounting Partsam LED trailer lights for all of their trailer hauling Towing & taillight needs! No need to worry about anything - every purchase is covered by our 30 Day Money Back Guarantee.

User questions & answers

Question:	Can you get them in Amber
Answer:	Not sure. I can tell you that the bulbs don't last very long. It's been a few months since I bought the four pack. And I already need to buy more.
Question:	Does anybody know what i am supposed to hook the white wire to. Wiring to a 2 wire harness and lights have 3 wires
Answer:	No it's not
Question:	How many feet of wire is with the lights
Answer:	That’s correct, there are 2 bulbs. Many of us don’t have a Meijer nearby and are happy to find this on Amazon. Note too that it is being sold by a third party seller, not Amazon itself. Most third party sellers are small business owners who drive to the store, stand in long lines, carefully bubblewrap and package the items, then pay to ship them to Amazon’s warehouses to sell. I’m happy to pay them to shop for me and have this item just show up on my doorstep in two days.
Question:	Can i mount to mesh trailer gate
Answer:	Yes

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Specifications

Features

Functions

Wiring Tips:

White Wire is the Ground; Red Wire is the high brightness; Black Wire is the low brightness.

• Package includes 2Pcs 6 Inch Oval Led Trailer Tail Lights, Grommets and Pigtails Included, 12V DC. Highly silicon sealed, IP65 waterproof, always be ready for different kinds of weather;
• LED TYPE: Each oval tail light has 10PCS high-quality SMD LEDs to output super bright red light, improving visibility and ensuring you a safer night;
• Easy to install: The 6 inch oval led light comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire pigtails. Wiring Tips: Black is the ground, Red is high brightness for use as turn/brake lights and White is low brightness for use as tail/running lights; Ovalall dimensions: 7.28" x 3.1" x 1.1"(with grommet); Light size: 6.3" x 2"(light only); drill hole size: 6.45" x 2.5" x 1.6"(approx.);
• Widely Used: these oval led taillights are universal for 12 volts DC vehicles like Trucks, trailers, tractors, semi-trailer, Dump, bus, special vehicle etc. Also you can use these oval lights on heavy duty trucks like Peterbilt, freightliner, international ,Kenworth, mack, volvo etc.
• Warranty: We truly offer 1 year warranty! If have any questions or issues about our 6 inch oval led trailer lights, Please feel free to us and we will reply in 24 hours;

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Application

Dimension

Features

Black Wire is the Ground; Red Wire is the high brightness; White Wire is the low brightness.

• 7 1/4" L x 3 1/10" W Waterproof Oval Red Led trailer tail light serves 3 functions: turn signal lights, stop brake lights, or just tail lights; Flush mount with grommet and 3 prong wire pigtails;
• 10 Red LED Diodes in Red Lens; Work on 12v DC, 3 wires with 2 steps Brightness, Can Modify for Signal Light, Flash Light, Emergency Light ( Flasher relay or Controler not included ); Wiring Tips: Black Wire - Ground; Red Wire - high brightness; White Wire - low brightness;
• Super Brightness: Each tail light has 10PCS high-quality SMD LEDs to output super bright red light, high brightness for Turn/Brake light, low brightness for Tail light, improving visibility and ensuring you a safer night;
• Compatible with almost All automobiles and devices equipped with a 8-16 Volt DC power source such as Semi Truck, Semi Trailer, Service Truck, Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV Peterbilt, freightliner, international ,Kenworth, mack and lorries etc.;
• Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6.6" x2.5" x 1.75";

User questions & answers

Question:	Are they made in the USA
Answer:	The app on your phone has a color wheel and has a saturation and brightness bar. If you move the saturation bar all the way down, the lights will be white.
Question:	How many amps per light, low light, bright
Answer:	I have no idea ..

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi Channel Sales – We successfully advertise our products on multiple platforms and maintain healthy sellers, which keep customers drawn to our products.
• Qualified Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products.

Application

Dimension

Features

Black Wire is the Ground; Red Wire is the high brightness; White Wire is the low brightness.

• Package includes 2Pcs 8 1/4" LED Light flush mount Light Bars. These 8 1/4 inch light bars come with Two 10 LED 6 1/2" red led Light Bar, total 20 LED. Each 6 1/2 inch red led strip bar has 10 Red LED w/Red Lens; Mounting Holes are 7 1/2" Apart; LEDs are brighter and have lower amperage draw making it possible to add more lighting without upgrading your charging system;
• Wire Connection Tips: White Wire - Ground, Red Wire - Stop/Brake Light , Black Wire - Running/Tail Light
• The DUAL 10 LED 8 1/4" STOP TURN TAIL LIGHT BAR is DOT (Department of Transportation) compliant for street legal lighting making it a great choice for your light needs.
• The placement is versatile, it is compatible with almost All automobiles and devices equipped with a 10 Volts to 30 Volts DC power source such as Semi Truck, Semi Trailer, Service Truck, Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV, Peterbilt, freightliner, international ,Kenworth, mack and lorries etc.
• Warranty: We truly offer 1 year warranty! If have any questions or issues about our red tail light bars, Please feel free to us and we will reply in 24 hours;

User questions & answers

Question:	Can I order this item with amber led lights. I love the ones I ordered with red need now with amber
Answer:	No, Brilliant does not integrate with Control4
Question:	Do you need led drivers for these? Wanting to use to replace existing tail lights on a RV
Answer:	1.Download ""Gosund"" App, Register a new account 2.Login your account and Add device>Lighting>strip lights 3.Long press the controller button for 5s 4.Enter 2.4Ghz wifi password 5.Make sure the light strip flashes quickly 6. wait for configure successfully
Question:	theres two set of wires ,do u hook up color to color on each to work correctly,whats wireing diagram
Answer:	Yes, but the cut-off part cannot be used
Question:	is it really a 10-30 vdc light, or only 12v ? the site shows both specification for the same product. thanks
Answer:	Yes. They can be used with smart life。

Product features

About Partsam

It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.

Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.

Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.

Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Applications:

The placement is versatile, it is compatible with almost All automobiles and devices equipped with a 12-30 Volt DC power source such as Semi Truck, Semi Trailer, Service Truck, Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV, Peterbilt, freightliner, international ,Kenworth, mack and lorries etc.

Dimensions

8 1/4" LED Light with Two 10 LED 6 1/2" Flush Mount Light Bar

Total 20 LED: Each Light Bar has 10 Red LED w/Red Lens

Mounting Holes are 7 1/2" Apart

High impact polycarbonate lens and housing are sonically sealed to prevent damage from moisture and corrosion

DOT compliant for street legal lighting

Premium quality pearl LED (light emitting diodes) lights are a great choice to dress up your ride with bright LEDs.

LEDs are brighter and have lower amperage draw making it possible to add more lighting without upgrading your charging system.

The placement is versatile.

• Warning: This light could only be working Either as Tail light or as Turn light , but not for both at the same time.
• Partsam (2 x Red) Sealed Waterproof 12 LEDs light Stop Turn Tail Brake Lamps for Trucks, Trailer, RVs, and Boats.
• Acrylic lens is sonic welded to the housing, waterproof lens and housing in a single unit. All-weather molded plastic housing and durable lens protect against corrosion.
• Outer Diameter: 140mm (5.5''); Inner Diameter: 105mm (4''); Height: 24mm (1''); Hole Distance: 105mm (4'')
• Hardwired with 3 wires: White Wire is the Ground; Red Wire is the high brightness; Black Wire is the low brightness

User questions & answers

Question:	Can this fit a mitsubishi pajero
Answer:	You need to make sure you buy the smart outlets for it!
Question:	I bought these for backup lights so I wired to truck backup lights white to white and high power red to black on truck back up what do I do with light
Answer:	You can change the colors via voice but only certain colors are available via voice. 15 colors to choose from via Alexa and can be seen in the Alexa app.
Question:	Do you have it for rail/ send goal light in red
Answer:	Yes you can. You have to do it at certain spots only though. You'll see where the soldering points are. That's where you can cut it.
Question:	How many lights are there
Answer:	To turn on or off, simply open the gosund phone app and click on the light bulb to turn on or off. If there is a particular time of day that you watch tv regularly, you can schedule the lights to turn on and/or off in the app as well. Just click schedule, then at the bottom "add schedule" , put in turn on time, toggle setting on, then repeat the step for turn off time. That way you never have to think about it and you can always override the schedule by manually turning the light strip off or on.
Question:	Will the work on my 2001Ford E450 rv
Answer:	Use a USB extension cord and a USB charger. I've done that. But you lose the music function.
Question:	Are these DOT approved
Answer:	Apple Home Pod cannot be controlled from the screen on Brilliant. Brilliant allows Apple HomeKit to control the lights or devices (like on/off switches) that are connected directly to the Brilliant Controls in your home. After setup, you can say, "Hey Siri..." to your Siri-enabled devices to automate and control your smart home. For more information, please refer to the following FAQ: https://support.brilliant.tech/hc/en-us/articles/360020449431-How-to-set-up-HomeKit-with-your-Brilliant-Control
Question:	Can you got plate holder with tail lights
Answer:	For the Fan and Light, if they are wired separately, then yes, you can control the fan and light independently with a 2 gang Control. The fan will only be on/off, you cannot control the fan speed via the Brilliant Control.
Question:	what are the wiring leads to have 6 leads where to they connect to
Answer:	Brilliant does not come in a 5 gang size.

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Specifications

Features

Functions

Wiring Tips is as above in the picture. These right here are your taillights, each one of these serve as a stop light, a turn signal light, and taillight, and in here in the center, you have your backup light, this is white LEDs.

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Specifications

Features

Functions

Wiring Tips:



White Wire is the Ground; Red Wire is the high brightness; Black Wire is the low brightness

• This Thin-design, low-profile 17" Identification Light Bar or S/T/T Bar Can be mounted horizontal, vertical or at an angle, Slim design for use where space is a premium; Powered by 40 high power NICHIA Super FLUX LED's emitters with 460 lumen lighting output; This is a MUCH Brighter bar and improves both style and safety
• Functions: This Low-profile trailer tail light serves 3 functions on trailers over 80" wide: Stop light, Tail light, Turn signal light, Also you can use it as Center Mount Third 3RD Brake Light, Led Clearance Lights bar, Led Marker Light Bar, Led Identification light Bar, id light bar etc.
• Wiring: White Wire is the Ground; Red Wire is the high brightness; Gray Wire is the low brightness.
• Waterproof: The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
• Compatibility: Universal For Any 12V Vehicles, such as heavy duty trucks, semi trucks, service trucks, utility trucks, horse trailers, utility trailers, Pickup trucks, semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting.

User questions & answers

Question:	Does anybody know if the wires are 18 or 16 awg
Answer:	There are on the smaller nightstand, so I would assume this is constructed the same.
Question:	Can these lights be contoured
Answer:	i don't do that,but,i suggest you can ask the seller
Question:	does this light come in a size of 10" or 12" long
Answer:	i think it's warm light
Question:	Son 2 barras o 1 en el paquete
Answer:	for me,this table light was bright enough.also it's diammable,i can choose the bright which i need

Product features

About Partsam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Applications

for use on heavy duty trucks, semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting.

Dimensions

• COMPLETELY SEALED AND WATERPROOF
• Super bright Red LED Surface Mount, Sealed 17" light
• Each light has 40 Super Bright Diodes for a Bright Performance.
• Functions as clearance, side marker or identification light, stop, turn, tail and brake light
• These light bars have 3 wires for ground, brake, turn and tail light.
• They have 2 screw holes for mounting
• Comes with a Polycarbonate Lens with All Weather Housing for durability
• Convert your old incandescent lights to more modern LEDs.

• Package includes 2pcs 40 LED Trailer Tail Light Bar. It is ideal for most towing vehicles equipped with 10V to 30V DC power supply, such as RV, campers, trailers, trucks, UTEs, UTVs, engineering vehicles, loader, boats, flatbed, vans, caravans, Excavator,Reaping machine and so on,can improve safety give your car a new look;
• Trailer tail light bar adopts 40 pcs advanced LED with high brightness, long lasting, bright LED technology. Over 100% brighter than Stock units. Life span of over 50,000 hours. Our replacement trailer tail lights may very well outlast your truck! We do build a 2" X 4" reflector into the red portion of the lens, which will make them legal to use;
• There is Iron bracket on the backseat and the iron net in front of the lampshade, which is stronger than others such as just pure plastic and protect the whole LED light bar effectively and prolong its service life;
• 5-WIRE connection system for Negative, Turn Signal, Brake Light, Running Light and Reverse Light: Black Wire - Negative; Red Wire - Brake Light; Green Wire - Tail/Running Light; Yellow Wire - Turn Signal Light; White Wire - Reverse Light; There are two mounting studs on the back with nuts to lock them in place. just cut your current tail lights wire harness one by one and match them to the new trailer lights color guide; NOTE: Two holes may need to be drilled to install;
• Waterproof & Warranty: IP67 waterproof trailer tail light, capable to withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather, provides long-term durability for your vehicles; 1 Year Warranty;

User questions & answers

Question:	We have an RV that is currently wired for two bulbs, one for back-up and one for brake/running lights...are these lights a good fit
Answer:	I am not sure if mine is faulty. I connected as it said in the description. When the park light is off and you apply the brake there is light. When the park light is on and you apply the brake it doesn’t get bright to show that you apply brake.
Question:	How do these mount? What are the brackets like on the back
Answer:	No. Just universal 3 bolt pattern for this style of lights. Bolts and nuts included.
Question:	are direct plug in connections available for these lights
Answer:	They have studs sticking out the back if you got something flat to put the studs through with a nut on the back they'll fit anything
Question:	Are they DOT approved
Answer:	5 3/4 L 6 3/4 H 3 1/2 W

Product features

About Partsam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Applications

Universal for Vehicle Equipped with 10-30V Power Supply Such as Pickup, RV, Trailers, Trucks, Camper,UTEs, UTVs, ATV, Boat, Caravans,Vans, Flatbed,Engineering Vehicle,Loader, Excavator,Reaping machine and so on

Dimensions

Long Lasting, Shock Resistant, High Brightness, Rust resistant.

Low power consumption, Energy saving.

Material: ABS Iron Housing + PC Lens

Size: 13.38" * 6.06" *1.96" (L*W*H)

Voltage: 10-30V

Number of LED: 40pcs

Color: Red/Amber/White

With the nice appearance, this tail with make your truck more good-looking!

It is attached with the Iron Net in front of the lampshade, can protect the lampshade and expand its life-time. Professionals install is strongly recommended to avoid trouble caused by inexperienced installer! (Drilling holes may required for some models).

• Partsam ( 2 x Red in smoke lens ) Super bright LED Surface Mount 15" light bar, completely sealed & waterproof.
• Each light has 11 Super Diodes for a Bright Performance; Polycarbonate lens is sonic welded to the housing.
• For use on heavy duty trucks, semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting.
• Functions as marker, clearance light, side marker, identification light, stop light, turn light, tail light and brake light.
• EASY TO INSTALL: White Wire is the Ground; Red Wire is the high brightness; Black Wire is the low brightness.

User questions & answers

Question:	I plan to use them as a brake light for my truck's bed rack which is blocking the 3rd brake light. Are these visible during the day
Answer:	You can actually burn yourself if left too long on one area. Definitely don't start of at 30 or 40 like someone else mentioned. Start off at 10 or 15
Question:	Can I use these instead of conventional tail lights? Will they work one on left one on right as running lights/ brake lights/ turn signals
Answer:	I think so. Sure looks like it to me. Bought two and I’m happy with them.
Question:	How do i hook them up. i have 2 wires coming out of the trailer and 3 wires on these new lights
Answer:	The base comes assembled as one piece, you need only to screw in the legs and slide in the drawers (super easy).
Question:	Do you know the diameter of the housing where the wires come out thru the back is? Need this for the right grommet size. Thank you
Answer:	This piece is very poorly constructed. I would not recommend that you buy it at all. I bought two different items from the same manufacturer and they were both junk.

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.
  
  
  
  
  
  
  
   

Specifications

Features

Functions

Can be used as clearance light, side marker, identification light bar, stop light, brake light, turn light, tail light, running light.

• Partsam ( 2xRed ) Super bright LED Surface Mount 15" Inch Led Trailer Tail light bar, completely sealed & waterproof;
• Size: 15.5" x 1.3" x 0.47" and hole distance: 14.5"; Note: This 15 inch led stop turn tail light bar is about really maybe a half inch thick, but with this little knob where the wires all come out, it's about an inch. So you'll probably need to cut out a hole to allow that to go in. And that little spot is about 9/16 inch. So you might need to have a hole saw or punch out a hole there to allow that to go and not cause any issues with that;
• Each Red light bar has 11 Diodes for a Bright Performance; Polycarbonate lens is sonic welded to the housing. Applications: This led brake light strip can be perfectly used on semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting. Also you can use on heavy duty trucks like Peterbilt Freightliner Kenworth Mack Western Star Volvo etc.;
• Wiring Tips: White Wire is Ground, Red Wire is high brightness as stop light, turn signal light or brake light and Black Wire is low brightness as tail light or running light; This red led strip bar have 2 existing screw holes to go through the back wire, Just fix two ends with two screws. It can be mounted horizontal, vertical or at an angle;
• Warranty: We truly offer 1 year warranty for this 15 inch led brake tail light bar! If you have any questions or issues about our partsam led lights, Please feel free to us and we will reply in 24 hours;

User questions & answers

Question:	Is there a fix to improve the difference between the running and brake/signal light? They look awful
Answer:	Thank you for your inquiry. The globe shade dimension is 16 X 16 X 10.
Question:	Won't work on my 6-pin connector. the car supplies +12v for tail lights or turn lights (and works fine), but supplies -12v for brake (to l&r). ideas
Answer:	Yes, it is easy. Just place the four tabs on the lamp comb into the grooves of the lamp housing and gently move comb to right until it snaps into position.
Question:	cannot tell the brake light from the tail light
Answer:	Be sure to wear the goggles to protect your eyes. Be careful to not leave it to long in one place or too close to skin. You can get burns from it
Question:	Will these lighs flex at all? I want to mount two vertically on the back of my van but the body is not perfectly flat there
Answer:	This uvb lamp can be used on your body.

Product features

About PARTSam

• It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts - a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry.
• Inventory Management/Warehouse & Fulfillment – With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache.
• Automated Multi-Channel Sales – We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels.
• Professional Seller - Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.

Specifications

Features

Functions

Can be used as stop brake light, turn signal light, identification light bar, stop light, brake light, turn light, tail light, running light;