13 best subcompact tractor

User questions & answers

Question:	What is the bolt diameter/ size and tread on the clamping bolts
Answer:	Bolt diameter 1 inch coarse thread 4 inches of thread you have 1/2 by 2 pad and a handle of sorts
Question:	I have a narrow bucket, what is the total width of the assembly
Answer:	The stabilizer bar is removable. It just slides over the forks, and has the ability to adjust to whatever width you set your forks up to. So you can set your individual forks to each side of your bucket, without the center brace, if you wanted to.
Question:	will these fit a 1710 massey fergason
Answer:	I don't think you have a replaceable cutting edge on your MF 1710 loader, so you should be able to slip these forks on without a problem. Double check the depth of your bucket and compare it to the fork specifications. Total length is 43". Working length is 30". So your bucket depth should be a minimum of 13". Use the stabilizer bar to keep forks from twisting under an uneven load and don't lift too much at once. Better to make two lifts than to have a mishap. M.J.P.
Question:	would these attach to bucket with a toothbar already on bucket
Answer:	It will work fine, but you may not be cable to use the stabilizer bar. The tooth may interfere if you curl the bucket to slide the maerterial closer to the bucket. I believe you’ll still get good use out of them.

Product features

Titan Attachments 30 in. Clamp on Pallet Fork With Stabilizer Bar

When you have a hefty load to transport, use Pallet Forks by Titan Attachments. Our pallet forks are designed with high-quality, heavy-duty material that can withstand large weight capacities. These clamp-on pallet forks are no exception. They can carry loads of up to 1,500-pounds. No longer do you need to strain yourself or your equipment. These pallet forks will do the job for you! Use them to help you landscape your property or clamp them on for your farming and agricultural needs. We recommend using them to pick up logs, lumber, timber, and firewood. These pallet forks are also fantastic for moving and installing fence posts. You can use these forks to clear brush and debris to prepare for the perfect bonfire. Perhaps you have several mounds or bales of hay that need to be rearranged. With our pallet forks, the job becomes a piece of cake. Farmers aren’t the only ones who benefit from pallet forks; hunters use them too, especially for properly transporting game.

TRANSPORT GOODS WITH EASE

Skip the heavy lifting and let your tractor do the work! Our pallet forks make it easier to move and transport hefty items. These pallet forks allow you to haul logs, lumber, and firewood. You can also move fence posts. Use these pallet forks to clear debris and brush as well as move hay bales. The versatility of our pallet forks is endless. Order today.

ADJUSTABLE SPREADER BAR

It can be irritating when your forks spread too far apart because it makes picking up bales or logs more difficult. With our adjustable stabilizer bar, this issue won’t be a problem. The bar conveniently prevents your forks from spreading apart. Our stabilizer bar can be adjusted from 23.5 to 40.5-inches. Just use the width adjustment knob to determine your desired distance.

COMPATIBLE WITH MOST MOWERS

These pallet forks feature a universal design that is compatible with most lawn tractors, loaders, and mowers. Whether you own a New Holland, Kubota, Ford, or another make, these pallet forks will easily clamp on. Just attach the forks to the bucket and you’ll be set to start moving supplies. These pallet forks are an essential piece of farm equipment.

SECURE LIFTING

These lightweight pallet forks use chain holes to ensure you’ll get a secure lift, even when dealing with heavy objects. These forks are designed with thick rectangular tube walls. Each fork weighs about 35-pounds. Rollback protection slots will keep you and your machinery safe from harm. These forks have a combined weight capacity of 1,500-pounds, so you can carry a wide variety of goods.

Product description

The Tool-Tuff Pole-Star 400 3-Point Tractor Post Hole Digger for Compact/Sub-Compact/Cat 0 Tractors



From Tool-Tuff Direct! Your Source for Tough, Affordable Implements & Accessories Since 2012!



This is a new, high-quality post-hole digger that is OEM quality and has been in production for decades, serving farmers, landscaping professionals and property owners proudly and reliably.



Ships free to a commercial address or address with a method of unloading a crate from the back gate of a semi truck (fork lift, bucket tractor). Additional charges may apply for extremely remote areas but we will check with you before shipping the order if that is the case. Lift-gate Service to get the crate off of the semi is an extra fee that you will be charged by the freight company if you need this service.



Compatible with 6", 9", 12"," Earth Auger Bits that bolt to a 2" gearbox shaft (36" recommended length - you can use 48" ones but they can drag when you're driving around)



Contains everything you need (besides the tractor!) to get digging!



1. Boom with high strength 2-7/8" tubing with 4 adjustment hole sets and manual canister



2. PTO driveline, robust 1 series with safety shields (1 3/8" x 6 Quick release x 1 1/4" Round w/ Shear Bolt)



3. Heavy duty right angle gear box



4. High strength A-Frame - 21" lift arm spacing



5. Hardware kit with necessary pins and bolts



6. Can be purchased without augers, or with them via the dropdown menu. If there is a combo you don't see and would like to purchase, please contact us. All augers are 36" length



7. Augers 6-12" diameter are Standard-Duty w/Replaceable Edges.



Backed by our exceptional customer service.

• Ships Freight: shipping times may vary depending on location
• Rugged Steel Construction For Compact, Sub-Compact, Cat 0 Tractors
• Comes with Your Choice of Auger Combinations, Choose from 6", 9" & 12" Augers
• Includes Everything needed to get digging! (Except the tractor)
• Backed by Exceptional Customer Service & 1 Year Warranty

User questions & answers

Question:	will this fit a John Deere 1023e
Answer:	Yes
Question:	Will this fit a Ford new holland 445 model
Answer:	I am not sure but this company Tool Tuff should be able to tell you they are really cool.
Question:	Does it fit a john deere 1026r
Answer:	Yes, this will fit tractors of that size including the 1026r
Question:	Will this fit a Kubota L
Answer:	I think this is category 1 tractor. You may want to try our model 650 digger

Product description

With the new Tractor Drawbar with Suitcase Weight Brackets you never have to choose between which implements you need to get the job done. Simply add your suitcase weights to the drawbar for counterweight and still be able to use the 2" receiver for any compatible attachment. This drawbar is designed for tractors with a Category 1 3-Point Hitch and includes 7/8" lower pins and a 3/4" top pin.



Features:

- 21" Of space for suitcase weights! 

- 2" Receiver hitch. 

- Zinc Plated top and lower pins included. 

- High quality steel and a durable powder coat. 

- Fits Category 1 3-Point Hitches.

- Quick Hitch Compatible



Specifications: 

- Overall Dimensions: 31" W x 18" H x 10" D

- Suitcase Bracket Length: 10.5" per side.

- Weight: 42 LB

- Weight Bar Thickness: 3/8"

• 21" Of space for suitcase weights!
• 2" Receiver hitch.
• Zinc Plated top and lower pins included.
• High quality steel and a durable powder coat.
• Fits Category 1 3Point Hitches.

User questions & answers

Question:	What John Deere weight will fit and how many
Answer:	8 42 pound weights
Question:	Will this work on the Kubota
Answer:	I don't see why it wouldn't. I use it on a 2019 John Deere 1025r. I use it all the time. Works great. It will hold 8 suitcase weights, 4 on each side.
Question:	What size/brand suitcase weights will work on this hitch
Answer:	42 pound John Deere weights
Question:	Will it accomodate JD 70# suitcase weights
Answer:	I got my suitcase weights on Amazon, fit good and adds about 250 pounds total

Product description

The mechanical thumb for a backhoe attaches to the boom and has 5 possible positions to help you stabilize materials which are hard to control. Simply fold it back or slide out of the way when not in use. Hands down the easiest way to upgrade your backhoe. Please measure your bucket before ordering to ensure a proper match. A mismatched thumb will result in damage to your backhoe, as larger backhoes have more bucket force. For example: if you mount a 25” thumb on a hoe that requires a 31” one, you will probably bend or break your equipment. Make sure that this thumb is at least the length of your bucket when measured from boom to the teeth or the warranty may voided if damage occurs.



Features: 

- Bolt-on design 

- Folds out of the way when not in use. 

- Please measure your bucket before ordering 

- 5 possible positions 

- Fits backhoes with up to 3 3/16" boom width 

- Kubota BX25, BX24, BX23, BX22, BT601, BT751, Woods BH6000 Groundbreaker Backhoe, Titan Fronthoe, Mahindra 1710 Backhoe 

  

Specifications 

- Material: .4" steel body, and 1" steel support 

- Jaw length: 16.5" 

- Opening width: 3 3/16" 

- Finish: Powder Coated 

- Weight: 42 lbs

• bolton design Folds out of the way when not in use.
• Please measure your bucket before ordering 5 possible positions Fits backhoes with up to 3.25" boom width
• Kubota BX25, BX24, BX23, BX22, BT601, BT751, Woods BH6000 Groundbreaker Backhoe, Titan Fronthoe, Mahindra 1710 Backhoe
• Material: .4" steel body, and 1" steel support Opening width: 3.25"
• Jaw length: 16.5" Finish: Powder Coated Weight: 42 lbs

User questions & answers

Question:	Will this fit a kubota bh77? if not do you have a bolt on thumb that will fit the bh
Answer:	I'm not a dealer. I bought one for my LS backhoe attachment and had to cut it in half to get it on it
Question:	Will this fit the massey ferguson cb05 backhoe
Answer:	This "thumb" will fit on a 3" wide by 4" deep dipper stick. I use it on a BX23 backhoe.
Question:	I am a welder. What modifications are necessary to have this unit fit a Mahindra 1626B backhoe
Answer:	It fits a 3 in wide by 4 in deep dipper stick. A larger stick will require cutting the metal and welding on additional metal to widen it. A smaller stick will require shims to fit tightly.
Question:	my boom is 3-3/8" wide. if 3-1/4 is max then it will not fit. "is the 3-1/4" the max boom it will fit. i have a l-35 kibota loader/backhoe. backhoe
Answer:	My thumb is 3 1/8" wide, which was 3/16" wider than the dipper stick. I had to cut a 3/16" shim so that it would fit snug to the dipper stick and I tighten it up but it still slid down the dipper stick and ruptured a 90 degree hydraulic fitting. After that I just took it off and left it off! A thumb welded on would be better but a thumb greatly reduces the amount of dirt that the bucket will hold. This is for a Kubota BX 24D.

Product features

Titan Attachments 24" Weld On Backhoe Thumb Attachment

The mechanical thumb for a backhoe attaches to the boom and has 5 possible positions to help you stabilize materials which are hard to control.

Simply fold it back or slide out of the way when not in use. Hands down the easiest way to upgrade your backhoe. Please measure your bucket before ordering to ensure a proper match. A mismatched thumb will result in damage to your backhoe, as larger backhoes have more bucket force. For example: if you mount a 25” thumb on a hoe that requires a 31” one, you will probably bend or break your equipment.

Please measure your bucket before ordering

BOLT-ON DESIGN

FOLDS OUT OF THE WAY WHEN NOT IN USE

5 POSSIBLE POSITIONS

FITS BACKHOES WITH UP TO 3 3/16" BOOM WIDTH

Product description

1-piece 3-point hitch cross draw bars to fit Category 0 thru 2 tractors. Made with high quality materials and highly durable. Manufactured in China.

• 1-piece 3-point hitch cross draw bars to fit Category 0 thru 2 tractors
• Made with high quality materials and highly durable
• Manufactured in China

User questions & answers

Question:	Is this weldable steel or iron
Answer:	Yes. It was too thin to go into the drawbar slot on my tractor. I welded some metal plates onto it so it would fit better. The plates are still on.
Question:	What is the diameter of the end pins on this drawbar
Answer:	5/8 "
Question:	How can it fit 3 different hole sizes
Answer:	the bar I have is 7 hole 3/4 in each hole, Bar is 5/8 in thick, bar ends are 5/8 in .

Product description

1-piece 3-point hitch cross draw bars to fit Category 0 thru 2 tractors. Made with high quality materials and highly durable. Manufactured in China.

• 1-piece 3-point hitch cross draw bars to fit Category 0 thru 2 tractors
• Made with high quality materials and highly durable
• Manufactured in China

User questions & answers

Question:	What size tow ball shank fits the holes
Answer:	3/4ths inch
Question:	will this fit a 1957 Ford 601 Tractor
Answer:	We believe it will. It’s made to fit a category 1 tractor.
Question:	Will this fit a John Deere 1025R
Answer:	It will fit any 3 point hitch.
Question:	What is the diameter of the pins
Answer:	7/8

Product description

When you’re trying to get a job done around your lawn or garden, on a farm field, or at an industrial site, having the proper equipment saves you both time and energy. This 3-Point 2-inch Receiver Trailer Hitch Category 1 Tractor Tow Hitch Drawbar Adapter is designed to be compatible with many standard 2-inch trailer hitches.



Features:

- Category 1 lift pins (7/8" diameter)

- Standard 2" trailer receiver

- Heavy duty steel construction

- Bottom pins included

- Strong powder coated finish



Specifications:

- Width: 26" (from end of pin)

- Hight: 19" (bottom pin to top pin)

Note: will not fit John Deere IMatch.

• HEAVY DUTY CONSTRUCTION - The hitch adapter is crafted of stainless steel, enhanced strenth and durability; Fully finished with black powder coating to resist rust and corrode, which affords to be left outside in the elements for long periods of time
• PREMIUM DETAILS - Overall Width 28" (from end of pin) and height 19" (bottom pin to top pin); Triangle design is for long-lasting using and relatively light weight, which is easy to hook up and lock to the tractor or trailer, saving your time and energy
• EXCELLENT PERFORMANCE - The tractor tow bar implement helps change device at the rear of the tractor for easy and quick assembly and disassembly and move trailers around on the property, widely used in heavy duty work of industrial and construction business
• COMPLETE KITS - Equipped with lifting pins that are 7/8 inches in diameter to fit all Category 1 tractors Standard 2" trailer receiver; Unique bottom pin makes it easy to use with smaller model tractors as well as larger tractors
• WIDE COMPATIBILITIES - The hitch drawbar adapter acts as a stabilizer, perfect for moving around Compact Sub-Compact Tractors BX Kubota, John Deere, LM25H WLM Tractor, NorTrac, Kioti, Yanmar, Cat and other cargo carriers

User questions & answers

Question:	Does this work on John Deere 1023e ? And how many pounds
Answer:	I got them at Tractor Suppy
Question:	Will this hitch work with a quick hitch
Answer:	Yes
Question:	Will this fit a gc1725m massey ferguson sub compact tractor
Answer:	It is fitted with receivers for bale spears. The spears will have to be purchased elsewear.
Question:	Quick hitch compatible
Answer:	You need to consider several factors: 1.) What is the "tongue" weight of the trailer compared to the weight rating at your 3-point? The weight of the hitch and the downward force the trailer is placing at the hitch should not exceed your 3-point's rating. Commonly, gooseneck trailers divide 20% (25% max) weight to the hitch (because it is over the towed vehicle's axle) with the rest of the weight on the trailer's wheels ("bumper pull" trailers should be 10% to 15% max). Something to keep in mind when you load stuff into a trailer. 2.) What is the actual total weight of the trailer compared to how much the tractor is rated to pull (which is different than how much it can lift at the 3-point)? Also, pulling the trailer through mud or on soft ground can increase the horizontal pull force to the tractor. 3.) Depending on the downward force placed at the hitch attached to the 3-point, you may need some counter-balance at the front of the tractor to keep enough weight on the front wheels, especially to ensure you can control and steer the entire rig, worse yet if you are traveling over anything besides smooth level hard ground. As for the capacity ratings for a tractor, of you cannot find them in the manual or on the manufacturer's site, you can always try websites like TractorData. And it is always good to know your trailer's typical loaded and empty weights at the axles and the hitch (if you exceed your tow vehicle's and tires' ratings, you are risking an accident and big liability, or a big fine from a veteran highway patrol). You can find this out by taking your trailer to a scale (at the co-op or almost any truck stop on the interstate -most advertise on their signs). Many scales have several adjacent weight pads to weigh each group of axles separately. Get your trailer's axle weight with tow vehicle attached, while simultaneously getting the tow vehicle's rear axle weight (on the other weigh pad, or pulling through if only have one weigh pad -the key is not having more than one group of axles on the same pad at the same time). Pull the trailer off, detach, and then get the tow vehicle's rear axle weight without the trailer attached. Subtract the tow vehicle's axle weight with and without the trailer attached and that should be close to the trailer's "tongue" weight (assuming the hitch is directly above the rear axle).

• Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors.
• Thick plate sits flush on your bucket or mounting material.
• Heavy duty installation hardware included for mounting.
• Quantity: 3
• Fits: 3/8" chains

User questions & answers

Question:	How long are the bolts that are provided? I have a flat center piece that's twice as thick (or more) than rest of bucket
Answer:	The bolts I got when I ordered this set were 1 1/4" long. Hope it helps.
Question:	Do these have a backing plate
Answer:	No backing plate.
Question:	Where can I order the backing plates
Answer:	Try contacting titanattachments on Ebay. Their store has a lot of Titan accessories, they may have just the back plates.
Question:	Use the bolts or have them welded on
Answer:	These are meant to be bolted on. You can weld around the base plates of the hooks but it isnt necessary. I have picked up wood bins that weigh well over 1k # with the hooks and have had no issues.

Product features

Titan Attachments Set of (3) 3/8" Bolt-On Grab Hooks

Add some functionality to your bucket with these Titan 3/8" Bolt-On Grab Hooks.

GRAB HOOKS WORK WELL WITH CHAINS AND RATCHET BINDERS FOR SECURING YOUR LOAD OR FOR TOW ANCHORS

THICK PLATE SITS FLUSH ON YOUR BUCKET OR MOUNTING MATERIAL

HEAVY DUTY INSTALLATION HARDWARE INCLUDED FOR MOUNTING

Product description

Choosing the right LED Light Bar can greatly improve safety and enjoyment of driving at night.

DJI 4X4 LED light bar feature bright and efficient Osram LEDs, provides high density intense and smooth beam.



SPECIFICATIONS

-Wattage: 120W/pair

-LED Source: OSRAM LED

-Color Temperature: 6000K – 6500K

-Working Voltage: 9 - 30V DC

-IP Rating: IP68

-Material: Die-cast aluminum housing;PC Lens

-Working Temperature: -40~ 85 degrees

-Lumens / Luminous flux: 12,000 Lumens

-Working Lifespan: over 50,000 hours



Application

1.Off-road vehicle:Truck, SUV, UTE, 4X4 ,4WD, ATV, UTV , Golf, Tacoma, Chevy, Silverado, Pathfinder, Hummer H2 H3, Yamaha Viking, Dodge Ram, Ford F150 F250 F350.

2.Indoor uses are Garden and Backyard Lighting Even warehouse lighting.

3.Special vehicle(fire engine, rescue vehicle, communication vehicle, military command vehicle) forklift, trains, boat, bus, and tanks etc.



What is in the box:

2 x 4 inch LED Light Bar

1 x necessary mounting kits.

Once you have completed the installation, enjoy your pride and joy as soon as possible. Have fun and be safe.

• TURN NIGHT INTO DAY -- With advanced Triple Row top rated OSRAM combo beam LED design, these 4'' led pods light feature 40pcs LED chips that emit 6,000k cool white light, delivering 120w (40pcs*3w) & 12,000 lumens can effectively lights up your entire dark road.
• PERFECT BEAM PATTERN -- Adopting the most innovative technology, the led driving lights surrounded design breaks with precedent. Middle 120° wide flood light surrounded by dual row 15° concentrated spot light for outstanding visibility can dramatically improve the night lighting.
• SAFE & ENJOYABLE DRIVING -- Manufactured from high-grade IP68 rated Die-Cast aluminum, the 4'' led light bar has excellent waterproof, dustproof, quake proof performance. Combined durability and affordability performance, it was built for the harshest environments.
• UPGRADED PERFORMANCE -- A black-painted 6063 Aluminum and poly-carbonate lens protect internal components, and integral heat sink allows all LED to run cool, which leads to incredibly long lifespan over 50,000 working hours!
• WIDE APPLICATION -- With working voltage of 9-30V DC, the LED cubes light can be widely used to most of vehicle styles(Off-Road, SUV, ATV, Trucks, Marine, Motorcycle, Boat, Heavy Duty Vehicles etc.)

User questions & answers

Question:	Can the spots and floods be wired to two seperate switches on the triple row 120w
Answer:	With the bar I purchase there was only one power lead. That doesn’t mean the light couldn’t be reworked inside. I also bought the light pods for lighting up the sides a little more. One spot one flood each side. That might be a better route to go that would give you connections on each pod.
Question:	Is it 45w each or 90w each? will these led lights work on touring motorcyle
Answer:	I have these on my KTM 990 adventure. They are brighter than anything you will ever need.
Question:	Can the mounting screw be set to parralel position to the light? Im planning on putting them in my fog light holes
Answer:	Sorry, it may can not. As the position of mouting srew has been fixed. You just can adjustable it show as the picture 4. But our quad row cubes can be set to parralel position. You can search the ASIN: B01MT7OLT4.
Question:	How many amp fuse would I need for the triple row 120w
Answer:	First of all, the 120 watt rating is for 2 units in parallel. So, for each 4" - 60 watt light bar, the measured amperage should be 5 amps. Watts = Volts X Amps Or, Amps = Watts/Volts. A safe fuse rating would be 7.5 amp. For both light bars in parallel, a safe fuse rating would be 15 amp. I recommend using 16 gauge wire and a switch rated for 15 or 20 amps. Note: This light bar can be connected to a 9V to 30V DC supply. Calculations were based on a 12V supply.

Product description

Taking out the trash just got fun! Introducing Heavy Hitch’s new Hitch’N Can Garbage can hauler. If you’re looking for an adapter that allows you to use to Hitch’N Cans, check out our Dual Adapter!

• WORKS WITH 2 INCH RECEIVER ON THREE POINT HITCH: Designed to slide into the Heavy Hitch 2 inch receiver or any other 2 inch receiver tube device. Please ensure that you are utilizing this device on a sub-compact tractor that has a 3 point hitch as this setup will give you the proper clearance for your trash cans.
• TRANSPORT TRASH CANS WITH EASE: The Hitch’N Can is the perfect solution for people with long or steep driveways and makes getting the trash and recycling carts to the curb easy.
• REDUCES DAMAGE TO TRASH CARTS: By using your tractor’s hydraulic three point lift to raise up the cart it prevents damage to the wheels and less chances to get injured by a slip or fall from handling a heavy cart.
• MADE AND SOURCED IN USA: Like other Heavy Hitch products, the Hitch’N Can is built to last using only American made steel.
• Order two Hitch’N Cans and the Dual Adapter to haul twice the load in the same amount of time.

User questions & answers

Question:	When used on a UTV, will the can be high enough off the ground as to not drag
Answer:	I tried this out on a car, and the can absolutely dragged on the ground. It will need to be pretty elevated not to. If your UTV hitch isn’t more than a couple of feet off the ground, it’ll definitely drag.
Question:	What size is the holder itself? My handle is 1 1/2" wide
Answer:	The channel at the top is about 1 5/8", this will hook up to the bar that is on the front side of the trash can, not the handle.
Question:	What it the height to the bottom of the holder from the top of the receiver
Answer:	Thank you for your interest in our products, the measurement is 4.5".
Question:	Even though you only show it on tractors i assume that this will work on the back of a suv with 2" hitch (and wm garbage can
Answer:	It will work in any 2" automotive style receiver, but you will have to manually lift the can up into the holder

Product description

Yard Tuff’s DH-045 Drag Harrow, 4’ x 5’ is the ideal way to take care of your leveling needs. This quality drag harrow measures 4’ x 5’ and is constructed of a chain-link style galvanized mesh for a durable drag harrow that you can rely on. Attach this drag harrow to almost any ATV, UTV, or utility tractor with the universal chain-style hitch for easy towing. Making this drag harrow even more versatile is the front tray; use the front tray to hold cement blocks for extra weight, which gives you extra depth and force when needed. The powder-coat finish and durable construction ensures that this product will resist rust and be long-lasting. Yard Tuff’s drag harrow is ideal for covering seed after planting or seeding. It is also the perfect harrow for leveling playing fields and baseball diamonds. The drag harrow will also help you drag fertilizer into the ground for enriched soil. Yard Tuff’s safe and effective drag harrow can help you with a wide variety of tasks.

From the Manufacturer

1 year Manufacturer limited warranty.

• Measures 4’ x 5’ – perfect for a wide variety of jobs. Constructed of a chain-link style galvanized mesh for a durable drag harrow that you can rely on to meet your needs
• The universal chain-style hitch allows you to attach this harrow to almost any ATV, UTV, or utility tractor for easy towing
• A front tray holds 8” cement blocks for extra weight, making this drag harrow even more versatile
• The powder-coat finish and durable construction ensures that this product will resist rust and be long-lasting
• Weighs only 41 lbs.; 1 year limited Manufacturer’s warranty

User questions & answers

Question:	does it work on gravel driveways
Answer:	I would assume that it would but honestly, this is nothing more than but a piece of chain link fence attached to a clamp style bracket. I destroyed this thing in less than a day on my deer lease. If I were you, I would invest in something a lot more robust.
Question:	has ANYone used this successfully? Seems if you had a limited use for it & put some cinder blocks or other weight on it it would work to SOME extent right
Answer:	I'm sure it would work to some extent but read the reviews.... This thing is garbage. Honestly, if you can find a piece of chain link fence, it would be better. Strap on a couple of cinder blocks and get after it. I actually think a piece of chain link fence would be better. All of the material on this harrow is very thin and weak. An actual piece of chain link fence is made of thicker material. I bought a legitimate harrow from Basspro shops. It was almost $400 but that thing is as tough as a tank track. Don't waste your money here, find a piece of fence and cut it to size or buy another, more rugged harrow.
Question:	Are the blocks included
Answer:	No blocks included and they were a must for anything more than simple dirt/garden or dragging (I was using for dragging my food plots). I don't recommend this at all because the chain setup made it so it wouldn't center well and track behind the 4-wheeler, then after I set up following the pics online, the clips bent and I had to cut off of the ball on my 4-wheeler. Luckily, they took it in return no questions asked. It's probably ok for very simple drag harrow projects, though.
Question:	Will it work to spread manure behind a riding mower
Answer:	I bought it for this purpose and found it inadequate. It is too light to do much. I was trying to spread out horse manure in pastures, but the screen just rode over the top and on the grass. It might work if you put some weight on the screen itself, not just on the front. I didn't try that.

Product description

The Heavy Hitch Rear Receiver Hitch Plate for John Deere sub-compact Tractors adds hitch capabilities to the rear of your tractor without welding. Just bolt on using your tractor’s existing holes. Perfect for pulling and towing purposes when you need access to the rear of the tractor. Also allows you to add a variety of implements to the rear. Plus it won’t interfere with the PTO. Comes standard with a super durable environmentally friendly powdercoat in your choice of Green or Black.

• Compatible with John Deere 1023E, 1025R, 1026R and the new 2018 2025R sub compact tractors.
• Direct bolt-on replacement of the existing hitch plate.
• Includes 2 tie-down holes for securing tractor when trailering.
• Does not interfere with PTO shaft or John Deere backhoe.
• Will work in conjunction with Heavy Hitch.

User questions & answers

Question:	Is this for a 2 inch receiver
Answer:	It is a 2" receiver that would attached to the back of a sub-compact tractor. You will want to confirm your tractor with the compatible models.

Product description

This Cat-1 Three point hitch makes it easy to haul trailers and just about any other implements around the farm. This durable drawbar will withstand just about anything thrown at it.

• Fit standard 2" truck receiver - 1/4" thick 2"x 2" steel tubing
• Fits Cat-1 Tractors - 7/8" Draw Pins
• 29.5" wide x 19" tall (Pin to Pin)
• 7/8 Inch Cat 1 Lift Pins included
• Powdercoated Finish

User questions & answers

Question:	Is this imatch quick hitch compatible
Answer:	You may have to sleeve or replace the pins depending on the brand and cat. of the quick hitch. It is a standard three point configuration.
Question:	does this fit jd imatch hitch
Answer:	No I don't think so!
Question:	What size is the hitch receiver
Answer:	2" receiver
Question:	Will this for a Massey GC
Answer:	If your tractor has a 3 point impliment system this will work. I would suggest you use braces or cross chains to reduce sway. Works great bought a triple ball hitch and can move even the largest trailers.