14 best curt bike trailers

Product description

Whether you are an avid mountain biker or a casual rider, you will want CURT along for the ride. CURT bike racks offer both versatility and quality and are available in several different styles to fit your needs. CURT standard hitch-mounted bike racks are anything but average. They feature an adjustable shank to fit either a 1-1/4" or 2" receiver and allow use on most trailer hitch classes. Our standard bike racks also come with several useful features, including an anti-wobble shank to reduce noise and keep bikes more secure, and a compact design for easy storage. They feature adjustable arms to accommodate various bike heights and styles, and the arms can be folded down, when not in use, to remain out of the way. The tilt-down design built into our standard bike racks allows you easier access to the rear of your vehicle whenever necessary. This particular CURT standard bike rack is able to hold up to two bikes and features a maximum load limit of 90 lbs. To protect it against the elements and the trail ahead, this bike rack comes with a durable black powder coat finish.

• EASY TO USE. This hitch bike rack is designed to be fast and easy to use whenever needed. It conveniently mounts onto your trailer hitch, fitting into virtually any 1-1/4-inch or 2-inch receiver (do not install on a trailer or towed vehicle)
• SECURE TRAVEL. This hitch mount bike rack holds up to 2 bikes (90 lbs. max), keeping them secure for travel using adjustable rubber cradles. The rubber cradles fit multiple bike sizes and will not scratch the bike frames
• ANTI-RATTLE. This trailer hitch bike rack comes with a threaded hitch pin to install tight against the receiver and help prevent vibration during travel
• INTEGRATED SAFETY. This bike carrier hitch features integrated reflectors to enhance safety on your vehicle. It also comes with a support strap for improved stability (use of support strap is required on 1-1/4-inch receiver)
• CORROSION-RESISTANT. To help protect this hitch bike rack from rain, dirt and other corrosive threats, it comes with a durable black powder coat finish

User questions & answers

Question:	have a curt bike what diameter hole for mounting to hitch
Answer:	Not safely. 3 month olds tend to still fall over to the side or fall forward. And if it's not a heavy baby this stroller wouldn't hold them in place.
Question:	Do you need an adapter for a woman's bike
Answer:	No it does not recline. I think it is meant for children 14-18 months and older. I loved it for my children, and used it until they would no longer sit in it and wanted to walk everywhere. It folds down so easily and is so light to carry,
Question:	What diameter is the threaded hitch pin, i would like to purchase a threaded hitch pin with a lock
Answer:	The description says 42.5 folded and 38.25 fully assembled.
Question:	Will this bike rack fit a 2010 Toyota Rav
Answer:	All PANDORA Jewelry purchased through iServe on Amazon is new and genuine and delivered in authentic PANDORA branded jewelry boxes.

Product features

CURT Hitch-Mounted Bike Racks

For families, couples and solo riders alike, CURT hitch-mounted bike racks provide a convenient and secure way to bring your bikes along for that next big adventure. They feature a hitch-mounted design, utilizing your vehicle’s trailer hitch receiver tube and allowing space for other cargo inside and on top of the vehicle.

CURT hitch-mounted bike racks are packed with features, including a tilt-away frame, adjustable rubber cradles, an anti-wobble shank and fold-down arms. They are also available in a variety of sizes and capacities to accommodate any crew.

Tilt-away frame

A built-in pivoting point on the shank allows the bike rack to tilt back and away from the vehicle for easy access to the trunk or rear cargo area.

Anti-wobble shank

The shank fastens to the hitch receiver tube using a threaded pin, helping to prevent the bikes from dangerously swaying during travel.

Adjustable rubber cradles

The arms are fitted with rubber cradles and adjustable straps that secure virtually any size bike without scratching the frame.

Fold-down arms

The support arms can also be folded down when the bike rack is not in use, allowing for compact storage during the off-season.

Product description

Whether you are an avid mountain biker or a casual rider, you will want CURT along for the ride. CURT bike racks offer both versatility and quality and are available in several different styles to fit your needs. CURT premium bike racks come with an anti-wobble shank for better bike security, foldable arms for a compact design and a tilt-away feature for easy rear vehicle access. One feature that sets the premium bike rack apart from others is its tapered arm design. CURT premium bike racks are very accommodating to different types of bikes, having tapered arms to fit a range of bike sizes. This makes them an especially attractive option for families with younger children. All CURT premium bike rack comes with a durable powder coat finish, built-in reflectors and non-scratch rubber cradles. This model features a maximum load limit of 225 lbs. and is able to hold up to five bikes at a time.

• VERSATILE FIT. For versatile use, this trailer hitch bike rack features tapered arms, allowing you to mount bikes with large or small frames. It's great for families with adult bikes and kids' bikes
• EASY TO USE. This premium hitch bike rack is designed to be fast and easy to use whenever needed. It conveniently mounts onto virtually any industry-standard 2-inch x 2-inch trailer hitch receiver. It also comes with an anti-rattle hitch pin
• SECURE TRAVEL. This hitch mount bike rack holds up to 5 bikes (225 lbs. max), keeping them secure for travel using adjustable rubber cradles. The rubber cradles fit multiple bike sizes and will not scratch the bike frames
• INTEGRATED SAFETY. This bike carrier hitch features integrated reflectors to enhance safety on your vehicle. It also comes with a support strap for improved stability (use of support strap is required)
• CORROSION-RESISTANT. To help protect this hitch bike rack from rain, dirt and other corrosive threats, it comes with a durable black powder coat finish

User questions & answers

Question:	will this fit with spare tire mounted on back of jeep
Answer:	Yes! With room to spare. We fit the pack n play plus the pack n play organic mattress in this one bag. We took it to England and back and no issues.
Question:	How long are the arms
Answer:	Yes. it will. Thank you.
Question:	If I have a 1 1/4 inch receiver, will I need to buy an adapter? And how can you 'adapt' a 2-inch tube to fit into a 1 1/4 inch tube
Answer:	I don't have that stroller , but I think someone posted something the Maclaren
Question:	What is the max weight limit of bikes it can carry
Answer:	Yes, my tall 2 year old is already too big for it. He's 35 in tall And 30lbs. t's a very narrow seat. The wheels are pretty narrow too. If you're in the shorter side, it's not that big of a deal, I'm 5'2 and I can push it ok, my man is 6'1 and he can't. He has to hunch over and his feet always kick the wheels. I kick them too unless I push with my arms straight out in front of me.

Product features

CURT Hitch Bike Racks

CURT hitch-mount bike racks are easy to use and keep your bikes fully secure for the road ahead. They are designed to install, as-needed, using your trailer hitch receiver.

CURT hitch bike racks are available in multiple sizes and styles to accommodate any biking adventure, whether you’re embarking on your own or taking along the whole family.

Tray-style cradles

Two horizontal cradles and a vertical arm provide three points of contact for each bike, cradling the wheels and keeping the bike fully secure.

Padded arms

Each of the vertical arms is covered with a rubber padding to firmly lock down onto the bike frame without scratching or marring the paint.

Anti-wobble shank

To prevent the bikes from swaying during travel, the tray-style bike rack mounts onto the trailer hitch receiver tube with a threaded pin and shank.

Fold-up sides

During the off-season, the tray-style bike rack is easy to store, featuring sides that fold up and allow the bike rack to fit into a shed or other compact storage space.

Clamp-on bike rack

The clamp-on hitch bike rack quickly and securely mounts onto virtually any standard 2-inch ball mount shank. It holds up to three bikes and offers maximum convenience, folding up and storing easily when not in use.

Standard hitch-mounted bike rack

These hitch bike racks are available to mount onto 1-1/4-inch or 2-inch trailer hitch receivers. They use adjustable rubber straps to accommodate a variety of bikes, and they are available to hold up to 5 bikes.

Premium hitch-mounted bike rack

The premium hitch bike rack is the perfect family bike rack, featuring tapered arms to accommodate multiple bike sizes, including adult bikes and kids bikes. These bike racks also feature adjustable rubber straps for secure travel.

Product description

Camping on the lake shore, hunting in the Northwoods, biking down a mountain trail -- wherever you are headed this weekend and whichever toys you want to bring along for the ride, you can Bring It with CURT cargo management products. From our expanding line of bike racks to our new and improved cargo straps, we offer cargo management solutions to fit your unique lifestyle. The CURT clamp-on bike rack mounts onto a 2" x 2" ball mount shank by clamping over the top of it. This makes installation quick and simple and allows for full use of the hitch for towing a trailer. The clamp-on bike rack can hold up to three bikes at a time and features adjustable rubber cradles to prevent scratching the bike frames.

• EASY TO USE. This clamp-on hitch bike rack is designed to be fast and easy to use whenever needed. It conveniently mounts onto a trailer hitch ball mount and has an easily accessible release handle for quick removal
• SECURE TRAVEL. This hitch mount bike rack holds up to 3 bikes (135 lbs. max), keeping them secure for travel using adjustable rubber cradles. The rubber cradles fit multiple bike sizes and will not scratch the bike frames
• STANDARD FIT. For versatile use, this trailer hitch bike rack clamps onto virtually any 2-inch x 2-inch ball mount shank in a trailer hitch receiver (ball mount not included; do not install on a trailer or towed vehicle)
• INTEGRATED SAFETY. This bike carrier hitch features integrated reflectors to enhance safety on your vehicle. It also comes with a support strap for improved stability (use of support strap is required)
• CORROSION-RESISTANT. To help protect this hitch bike rack from rain, dirt and other corrosive threats, it comes with a durable black powder coat finish

User questions & answers

Question:	Can the rack be locked to the receiver hitch for security? Thanks
Answer:	Hello there, thank you for reaching out with your question! Our products are made using 100% cotton with the Öko-Tex Standard 100 certificate and we appreciate you taking the time to check. We are parents first and foremost and are very careful about the materials we use and have always used in our Tulas. If you would like to email us at [email protected] our Customer Care team will be happy to help answer any additional questions you may have. :) Best, Team Tula
Question:	Will this work on a girls style bike frame
Answer:	Hi Benjamin! Many of our customers use our carriers for hiking, traveling, etc.! Our Free-to-Grow carrier is perfect to take with you on a hike with your walking one-year-old!
Question:	What is the size of the upright square tubing? And, what is the weight limit for bikes
Answer:	Hello Stephanie, thanks for reaching out with your question!Our fully adjustable, ergonomic Free-to-Grow Baby Carrier has variable width and height settings to customize its fit to your growing baby. This innovative, no fuss design does not require an infant insert and can be used beginning at 7 lbs. The Free-to-Grow Baby Carrier has a weight range of 7- 45 lbs. and can be used for the front and back carry position. The Free-to-Grow Carrier has an adaptable panel that adjusts in width and height to fit your baby at any stage, and fully adjustable shoulder straps and waistband for optimal comfort for you. We hope this helps and wish you Happy Babywearing! :)
Question:	Will this work on a toyota fj cruiser with the exterior spare tire
Answer:	I'm not sure about the g-light, but it does NOT fit the g-luxe.

Product features

CURT Hitch Bike Racks

CURT hitch-mount bike racks are easy to use and keep your bikes fully secure for the road ahead. They are designed to install, as-needed, using your trailer hitch receiver.

CURT hitch bike racks are available in multiple sizes and styles to accommodate any biking adventure, whether you’re embarking on your own or taking along the whole family.

Tray-style cradles

Two horizontal cradles and a vertical arm provide three points of contact for each bike, cradling the wheels and keeping the bike fully secure.

Padded arms

Each of the vertical arms is covered with a rubber padding to firmly lock down onto the bike frame without scratching or marring the paint.

Anti-wobble shank

To prevent the bikes from swaying during travel, the tray-style bike rack mounts onto the trailer hitch receiver tube with a threaded pin and shank.

Fold-up sides

During the off-season, the tray-style bike rack is easy to store, featuring sides that fold up and allow the bike rack to fit into a shed or other compact storage space.

Clamp-on bike rack

The clamp-on hitch bike rack quickly and securely mounts onto virtually any standard 2-inch ball mount shank. It holds up to three bikes and offers maximum convenience, folding up and storing easily when not in use.

Standard hitch-mounted bike rack

These hitch bike racks are available to mount onto 1-1/4-inch or 2-inch trailer hitch receivers. They use adjustable rubber straps to accommodate a variety of bikes, and they are available to hold up to 5 bikes.

Premium hitch-mounted bike rack

The premium hitch bike rack is the perfect family bike rack, featuring tapered arms to accommodate multiple bike sizes, including adult bikes and kids bikes. These bike racks also feature adjustable rubber straps for secure travel.

Product description

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Honda Odyssey (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

• DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight, 350 lbs. tongue weight, 5,000 lbs. weight distribution capacity and 500 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
• VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
• FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
• RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
• EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda Odyssey

User questions & answers

Question:	If I install this hitch to 2005 Honda Odyssey, do I need to a adaptor for bike racks such as Thule and Yakima
Answer:	Max trailer - 5000 lbsMax tongue - 500 lbs
Question:	I bought this rack but I feel it's too heavy and overkill for transporting the bikes. Why did you pick this instead of class2 version
Answer:	Yes it is
Question:	Does this come with the required mounting hardware (washers & bolts) or do I have to purchase that separately
Answer:	The 21542 has an interlock...a nut built onto the ball...allowing the ball to be removed with one wrench...don't really see the advantage...unless you are going to constantly remove ball.... the 21536 is fine! Call Reese for further clarification.
Question:	Can I install this on 2014 Honda Odyssey? If yes, do I get instructions to install
Answer:	I received a 9" one. Sounds like they shipped you the wrong part.

Product features

CURT Trailer Hitches

At CURT, we think every hitch should offer a vehicle-specific design, meaning seamless integration and a reliable connection for your next adventure.

But our standards don't stop at vehicle-specific

To truly let you Bring It, our custom receiver hitches are made in the USA and have a co-cured finish of liquid Bonderite, inside and out, and durable powder coat.

We make over 1,000 different hitch models

Our hitches come in five classes, offering a range of weight capacities and receiver tube sizes. For nearly any vehicle and any adventure, you can Bring It with CURT.

Expertly engineered

We use actual vehicles and cutting-edge software to develop hitch designs that are strong, functional and tailor-made to fit your unique make and model.

Precisely welded

A combination of robotic welding and skilled manual welding ensures production efficiency, optimal strength, clean weld lines and a precise fit for each hitch.

Co-cured finish

For maximum protection, our hitches are mechanically descaled and co-cured in a liquid Bonderite undercoating, inside and out, and durable black powder coat finish.

Thoroughly tested

Our custom-fit trailer hitches are not only made in America, but every design is rigorously tested for safety and performance at our Detroit testing facility according to SAE J684 specifications.*

*J684 Surface Vehicle Standard issued 2014 from SAE International association for Trailer Couplings, Hitches and Safety Chains - Automotive Type

Discover the outdoors

Towing your camper or RV with a CURT hitch will leave you stress-free on your next outdoor adventure. Camping trips with family and friends build memories that last a lifetime. CURT offers the equipment needed to tow everything from teardrop trailers and popup campers to full-length travel trailers. Add even more adventure by utilizing the receiver tube of your hitch for a CURT hitch-mounted bike rack or cargo carrier.

Relax on the water

Do you find the bubbling sound of a boat motor therapeutic? Do you love lounging on the water with a fishing rod in one hand and a cold drink in the other? No matter where your next aquatic adventure lies, we offer the weight capacity to tow everything from a simple fishing boat to a small yacht. And with our co-cured finish applied to each custom hitch, moisture and rust will be the least of your worries.

Conquer new terrain

Is speed the adrenaline rush you need to get through your week? Do you live on the edge and constantly push yourself to new limits? Whatever your off-road vehicle of choice -- whether it's an ATV, dirt bike, snowmobile or dune buggy -- CURT has a hitch to tow your RV hauler or flatbed trailer. For added safety and security on the road, we also offer a variety of cargo straps to keep your toys locked down tight.

Master the job

Tough jobs require serious tools. From the farm to the construction site to the industrial park, CURT class 5 hitches are designed and tested to keep up with the hardworking lifestyle. We offer 2 and 2 1/2 inch receiver options with weight capacities up to 20,000 pounds, allowing you to tow anything from a heavy-duty livestock trailer to a tri-axle flatbed. No matter what the job demands, Bring It with a CURT hitch.

Product description

Whether you are an avid mountain biker or a casual rider, you will want CURT along for the ride. CURT bike racks offer both versatility and quality and are available in several different styles to fit your needs. CURT premium bike racks come with an anti-wobble shank for better bike security, foldable arms for a compact design and a tilt-away feature for easy rear vehicle access. One feature that sets the premium bike rack apart from others is its tapered arm design. CURT premium bike racks are very accommodating to different types of bikes, having tapered arms to fit a range of bike sizes. This makes them an especially attractive option for families with younger children. All CURT premium bike rack comes with a durable powder coat finish, built-in reflectors and non-scratch rubber cradles. This model features a maximum load limit of 180 lbs. and is able to hold up to four bikes at a time.

• VERSATILE FIT. For versatile use, this trailer hitch bike rack features tapered arms, allowing you to mount bikes with large or small frames. It's great for families with adult bikes and kids' bikes
• EASY TO USE. This premium hitch bike rack is designed to be fast and easy to use whenever needed. It conveniently mounts onto virtually any industry-standard 2-inch x 2-inch trailer hitch receiver. It also comes with an anti-rattle hitch pin
• SECURE TRAVEL. This hitch mount bike rack holds up to 4 bikes (180 lbs. max), keeping them secure for travel using adjustable rubber cradles. The rubber cradles fit multiple bike sizes and will not scratch the bike frames
• INTEGRATED SAFETY. This bike carrier hitch features integrated reflectors to enhance safety on your vehicle. It also comes with a support strap for improved stability (use of support strap is required)
• CORROSION-RESISTANT. To help protect this hitch bike rack from rain, dirt and other corrosive threats, it comes with a durable black powder coat finish

User questions & answers

Question:	What is the max weight per bike? I have an electric bike that weighs 55 lbs
Answer:	IT DEPENDS- SOME WILL FIT ,SOME WILL NOT
Question:	What is the size of the hitch pin
Answer:	The head of the blot takes a 3/4 inch socket wrench. The threaded part measures 1/2 inch. The smooth shaft of the bolt that receives the carter pin measures 3/8 inch. The length is 41/4 inches.
Question:	How much does this rack obstruct your view through the back window? Obviously I know it'll depend on how many bikes and their size, so in general
Answer:	This bike rack will fit any vehicle with a hitch that has an 1 1/4" or 2" receiver tube. The rack is very sturdy. I used to work for Curt MFG and I bought this rack after I was no longer with the company which shows how much I believe in there products even to this day. Curt makes a wonderful, quality product you will not be disappointed
Question:	Does this bike rack come with the pin and clip to mount on the receiver
Answer:	No its the same as the Tula Baby. Which can be used for years, my very tall son could fit it until almost three and at the point didn't want to be warn anymore.

Product features

CURT Hitch Bike Racks

CURT hitch-mount bike racks are easy to use and keep your bikes fully secure for the road ahead. They are designed to install, as-needed, using your trailer hitch receiver.

CURT hitch bike racks are available in multiple sizes and styles to accommodate any biking adventure, whether you’re embarking on your own or taking along the whole family.

Tray-style cradles

Two horizontal cradles and a vertical arm provide three points of contact for each bike, cradling the wheels and keeping the bike fully secure.

Padded arms

Each of the vertical arms is covered with a rubber padding to firmly lock down onto the bike frame without scratching or marring the paint.

Anti-wobble shank

To prevent the bikes from swaying during travel, the tray-style bike rack mounts onto the trailer hitch receiver tube with a threaded pin and shank.

Fold-up sides

During the off-season, the tray-style bike rack is easy to store, featuring sides that fold up and allow the bike rack to fit into a shed or other compact storage space.

Clamp-on bike rack

The clamp-on hitch bike rack quickly and securely mounts onto virtually any standard 2-inch ball mount shank. It holds up to three bikes and offers maximum convenience, folding up and storing easily when not in use.

Standard hitch-mounted bike rack

These hitch bike racks are available to mount onto 1-1/4-inch or 2-inch trailer hitch receivers. They use adjustable rubber straps to accommodate a variety of bikes, and they are available to hold up to 5 bikes.

Premium hitch-mounted bike rack

The premium hitch bike rack is the perfect family bike rack, featuring tapered arms to accommodate multiple bike sizes, including adult bikes and kids bikes. These bike racks also feature adjustable rubber straps for secure travel.

Product description

Your bicycle is more than just a frame, tires, handlebars and pedals. You live for what might be around that next turn, that burn in your legs as you climb a rocky trail and that freefall feeling you get as you descend a long hill. Your bike is not just a hobby; it is a gateway to the outdoors and your faithful companion in the wild. It was with this idea in mind that the CURT tray-style bike rack was built. The CURT hitch-mounted tray-style bike rack promotes your biking experience unlike any other because of its unique, three-point support system. It is made to be easier to use and keep bikes more secure, holding them at three points of contact. Instead of hanging the bike by its crossbar, the loop-like tray-style cradles hole the bike's wheels, keeping it secure on each end. The third point is an adjustable, ratcheting arm that moves up and down and locks over the crossbar, keeping the entire bike firmly held in place. Both the tray-style cradles and the vertical ratcheting arm are highly adjustable and can fit virtually any size bike, from a giant adult mountain bike to a single-gear kids' bike. CURT tray-style bike racks are not your average ten-speed. In fact, they are packed with features to truly make it all about the ride. They feature a hitch-mounted design to work with your vehicle's trailer hitch, and they come with a tilt-away feature to allow the entire rack to tilt away from the vehicle. This makes it easy to open a hatchback door or trunk and access the rear cargo area. Tray-style bike racks also feature a foldable, adjustable frame and an anti-wobble shank. Whether the road ahead is the winding course of your own personal Tour de France or the twists and turns of the forest trail, the CURT tray-style bike rack is coated in a durable powder coat finish to prevent rust and ensure a long life. This model fits 2" receiver tubes and holds two or four bikes with the extension.

• EASY TO LOAD. This tray-style hitch bike rack is designed for ergonomic loading and unloading of the bikes. The arms fold down as needed, and the cradles are set low for less effort when lifting bikes into place
• ENHANCED SECURITY. This hitch mount bike rack keeps your bikes fully secure during travel, featuring lockable, ratcheting arms. The bike carrier holds the bikes at 3 points of contact, and the integrated locks help deter theft when left unattended
• HIGHLY ADJUSTALE. This trailer hitch bike rack is accommodating to most bike sizes and styles. The cradles and arms are both fully adjustable to fit virtually any bike frame
• STANDARD FIT. This bike carrier hitch is made for convenient transportation of your bikes, featuring a shank to fit virtually any 2-inch x 2-inch trailer hitch receiver. It holds up to 4 bikes and 180 lbs. (do not install on a trailer or towed vehicle)
• CORROSION-RESISTANT. To resist the outdoor elements and keep rust away, this hitch bike rack is shielded in a durable black powder coat finish

User questions & answers

Question:	Can I convert this in to a two bike rack for times we are only taking our kids bikes
Answer:	33in long and 14in outside at the widest point / 8in outside wide at the shortest width.
Question:	Does this bike carrier tilt away from the car in order to access items in the back of the car while loaded with 4 bikes
Answer:	I know they make adaptors to go from 1 1/4 into a 2 but not sure about the other way for safety reasons. A 1 1/4 hitch receiver less of a weight rating. Remember you'll have nearly five hundred pounds of bikes on the rack plus the weight of the rack. Adaptors are just adding another point for failure. Hope this helped.
Question:	Does this fold up to back of vehicle when not in use
Answer:	According to Curt's website the max load is 225 lbs. http://www.curtmfg.com/Category/181/Premium%20Bike%20Rack
Question:	It shows that the hitch pin screws in and then you use a cotter pin is there any hitch lock that will fit through this bike rack
Answer:	This Curt bike rake will fit either the 2” receiver or the 1 1/4”. It has an adapter for the 2” receiver that comes with it when you purchase it.

Product description

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota RAV4 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

• DEPENDABLE STRENGTH. This trailer hitch is rated for 4,000 lbs. gross trailer weight, 600 lbs. tongue weight, 4,000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
• VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
• FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
• RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
• EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota RAV4

Product features

CURT Trailer Hitches

At CURT, we think every hitch should offer a vehicle-specific design, meaning seamless integration and a reliable connection for your next adventure.

But our standards don't stop at vehicle-specific

To truly let you Bring It, our custom receiver hitches are made in the USA and have a co-cured finish of liquid Bonderite, inside and out, and durable powder coat.

We make over 1,000 different hitch models

Our hitches come in five classes, offering a range of weight capacities and receiver tube sizes. For nearly any vehicle and any adventure, you can Bring It with CURT.

Expertly engineered

We use actual vehicles and cutting-edge software to develop hitch designs that are strong, functional and tailor-made to fit your unique make and model.

Precisely welded

A combination of robotic welding and skilled manual welding ensures production efficiency, optimal strength, clean weld lines and a precise fit for each hitch.

Co-cured finish

For maximum protection, our hitches are mechanically descaled and co-cured in a liquid Bonderite undercoating, inside and out, and durable black powder coat finish.

Thoroughly tested

Our custom-fit trailer hitches are not only made in America, but every design is rigorously tested for safety and performance at our Detroit testing facility according to SAE J684 specifications.*

*J684 Surface Vehicle Standard issued 2014 from SAE International association for Trailer Couplings, Hitches and Safety Chains - Automotive Type

Discover the outdoors

Towing your camper or RV with a CURT hitch will leave you stress-free on your next outdoor adventure. Camping trips with family and friends build memories that last a lifetime. CURT offers the equipment needed to tow everything from teardrop trailers and popup campers to full-length travel trailers. Add even more adventure by utilizing the receiver tube of your hitch for a CURT hitch-mounted bike rack or cargo carrier.

Relax on the water

Do you find the bubbling sound of a boat motor therapeutic? Do you love lounging on the water with a fishing rod in one hand and a cold drink in the other? No matter where your next aquatic adventure lies, we offer the weight capacity to tow everything from a simple fishing boat to a small yacht. And with our co-cured finish applied to each custom hitch, moisture and rust will be the least of your worries.

Conquer new terrain

Is speed the adrenaline rush you need to get through your week? Do you live on the edge and constantly push yourself to new limits? Whatever your off-road vehicle of choice -- whether it's an ATV, dirt bike, snowmobile or dune buggy -- CURT has a hitch to tow your RV hauler or flatbed trailer. For added safety and security on the road, we also offer a variety of cargo straps to keep your toys locked down tight.

Master the job

Tough jobs require serious tools. From the farm to the construction site to the industrial park, CURT class 5 hitches are designed and tested to keep up with the hardworking lifestyle. We offer 2 and 2 1/2 inch receiver options with weight capacities up to 20,000 pounds, allowing you to tow anything from a heavy-duty livestock trailer to a tri-axle flatbed. No matter what the job demands, Bring It with a CURT hitch.

Product description

However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Kia Soul (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

• DEPENDABLE STRENGTH. With a strong, welded steel build, this class 1 hitch is rated for 2,000 lbs. gross trailer weight and 200 lbs. tongue weight (limited to lowest-rated towing component)
• HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack
• DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this aftermarket tow hitch kit is submersed in a liquid A-coat and co-cured with a durable black powder coat finish
• EASY INSTALLATION. This class 1 hitch is designed to factory fit select model years of the Kia Soul
• TESTED FOR SAFETY. Each CURT class 1 trailer hitch design is thoroughly tested, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specifications for safety on the road ahead

User questions & answers

Question:	Is hardware included
Answer:	Not without a cross bar adapter attachment. Mine would not work, bought the bike 2 yrs ago, it does not have enough room between tubing to fit, had to buy the cross bar attachment.
Question:	Does this fit a 2021 kia soul EX
Answer:	The clamp end must clamp onto a 2" hitch draw bar and make sure it's a long one. The upright tubing is 1" square tubing and I'm not sure of the weight capacity but I haul three 26" mountain bikes on mine while pulling a pop-up camper been on two 400+ mile trips with mine with no problems just have to watch my turning radius so I don't smash a bike into the camper. And if you plan on pulling a trailer I DO NOT recommend using the stabilizing straps or else you will do damage to your vehicle I only recommend using them when you don't have a trailer behind you. Hope this helps
Question:	Will this hitch fit my 2021 kia soul X line without modifications
Answer:	You might need an extension piece for your hitch. It clamps onto a 2" bar. It didn't work for us because I use a sway hitch for our camper.
Question:	Will Fit in a 2020 Kia Soul gt line turbo? wondering since its exhaust is located in the center and not to the side like the other models
Answer:	It should but may rub on the tire causing wear on the tire or cover. You can buy an extension piece

Product features

CURT Custom Trailer Hitches

At CURT, we think every hitch should offer a vehicle-specific design, meaning seamless integration and a reliable connection for your next adventure.

But our standards don't stop at vehicle-specific

To truly let you Bring It, our custom receiver hitches are made in the USA and have a co-cured finish of liquid Bonderite, inside and out, and durable powder coat.

We make over 1,000 different hitch models

Our hitches come in five classes, offering a range of weight capacities and receiver tube sizes. For nearly any vehicle and any adventure, you can Bring It with CURT.

Expertly engineered

We use actual cars, vans and crossovers and cutting-edge software to develop hitch designs that are strong, functional and tailor-made to fit your unique make and model.

Precisely welded

A combination of robotic welding and skilled manual welding ensures production efficiency, optimal strength, clean weld lines and a precise fit for each class 1 hitch

Co-cured finish

For maximum protection, our custom hitches are mechanically descaled and co-cured in a liquid Bonderite undercoating, inside and out, and durable black powder coat finish.

Thoroughly tested

Our custom-fit trailer hitches are not only made in America, but every design is rigorously tested for safety and performance at our Detroit testing facility according to SAE J684 specifications.*

*J684 Surface Vehicle Standard issued 2014 from SAE International association for Trailer Couplings, Hitches and Safety Chains - Automotive Type

Open-back receiver

CURT class 1 hitches feature an open-back hitch receiver. This allows for easy cleaning of the receiver as needed and helps prevent buildup of dirt and debris (some class 1 hitches come with a fixed tongue instead of a receiver).

Available with included ball mount

Each CURT class 1 hitch with a receiver is also available as a trailer hitch kit with a ball mount included. The ball mount has a standard 1-1/4-inch shank and readily accepts the trailer ball of your choice.

Concealed main body

Many class 1 tow hitches are engineered with a concealed main body. The main portion of the hitch is hidden up underneath the car, providing a more seamless look and original equipment feel.

Integrated safety chain loops

All CURT class 1 trailer hitches comes with safety chain loops integrated into the design of the hitch, allowing for immediate connection of your trailer safety chains.

Product description

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Audi Q7, Porsche Cayenne and Volkswagen Touareg (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

• DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight and 600 lbs. tongue weight (limited to lowest-rated towing component)
• VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
• FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
• RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
• EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Audi Q7, Porsche Cayenne and Volkswagen Touareg

User questions & answers

Question:	does your product fit 2014 audi q
Answer:	Installation instructions online at Curt Manufacturing say, "Insert the bike rack shank into the vehicle receiver tube. Secure with 1/2" hex head bolt, flat washer, star washer and clip (#5)." The bolt is threaded.
Question:	Will this fit 2010 Audi Q7 Quattro
Answer:	Same as any other rack which is minimal and when the bikes are off you can set the arm in down position and you can't see much at all. I got this a few months back and can tell you it is very well built. Much better than the $200-$250 Allen units. Took on 1200 mile trip with no issues. My last one bent on the same trip.
Question:	does this come with harness? if so, is it plug in style
Answer:	Yes, it comes with the pin and clip.
Question:	How do you get bolts for hitch
Answer:	There is no lock mechanism for the rack it self, however you could take a high quality cable lock and go threw the bike rack around shank!

Product features

CURT Trailer Hitches

At CURT, we think every hitch should offer a vehicle-specific design, meaning seamless integration and a reliable connection for your next adventure.

But our standards don't stop at vehicle-specific

To truly let you Bring It, our custom receiver hitches are made in the USA and have a co-cured finish of liquid Bonderite, inside and out, and durable powder coat.

We make over 1,000 different hitch models

Our hitches come in five classes, offering a range of weight capacities and receiver tube sizes. For nearly any vehicle and any adventure, you can Bring It with CURT.

Expertly engineered

We use actual vehicles and cutting-edge software to develop hitch designs that are strong, functional and tailor-made to fit your unique make and model.

Precisely welded

A combination of robotic welding and skilled manual welding ensures production efficiency, optimal strength, clean weld lines and a precise fit for each hitch.

Co-cured finish

For maximum protection, our hitches are mechanically descaled and co-cured in a liquid Bonderite undercoating, inside and out, and durable black powder coat finish.

Thoroughly tested

Our custom-fit trailer hitches are not only made in America, but every design is rigorously tested for safety and performance at our Detroit testing facility according to SAE J684 specifications.*

*J684 Surface Vehicle Standard issued 2014 from SAE International association for Trailer Couplings, Hitches and Safety Chains - Automotive Type

Discover the outdoors

Towing your camper or RV with a CURT hitch will leave you stress-free on your next outdoor adventure. Camping trips with family and friends build memories that last a lifetime. CURT offers the equipment needed to tow everything from teardrop trailers and popup campers to full-length travel trailers. Add even more adventure by utilizing the receiver tube of your hitch for a CURT hitch-mounted bike rack or cargo carrier.

Relax on the water

Do you find the bubbling sound of a boat motor therapeutic? Do you love lounging on the water with a fishing rod in one hand and a cold drink in the other? No matter where your next aquatic adventure lies, we offer the weight capacity to tow everything from a simple fishing boat to a small yacht. And with our co-cured finish applied to each custom hitch, moisture and rust will be the least of your worries.

Conquer new terrain

Is speed the adrenaline rush you need to get through your week? Do you live on the edge and constantly push yourself to new limits? Whatever your off-road vehicle of choice -- whether it's an ATV, dirt bike, snowmobile or dune buggy -- CURT has a hitch to tow your RV hauler or flatbed trailer. For added safety and security on the road, we also offer a variety of cargo straps to keep your toys locked down tight.

Master the job

Tough jobs require serious tools. From the farm to the construction site to the industrial park, CURT class 5 hitches are designed and tested to keep up with the hardworking lifestyle. We offer 2 and 2 1/2 inch receiver options with weight capacities up to 20,000 pounds, allowing you to tow anything from a heavy-duty livestock trailer to a tri-axle flatbed. No matter what the job demands, Bring It with a CURT hitch.

Product description

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Honda Pilot and Acura MDX (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 900 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 900 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

• DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 900 lbs. tongue weight, 8,000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
• VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
• FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
• RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
• EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda Pilot and Acura MDX

User questions & answers

Question:	Where is slot to put trailer plug
Answer:	Once loaded with bikes, the carrier cannot tilt away from the car. The center support can be tilted without the bikes loaded.
Question:	What electrical wires are needed with this
Answer:	No, the stand doesn’t fold up toward the vehicle. The wheels support for the bikes do fold up though.
Question:	Will this fit my 2017 Kia sportage
Answer:	No, the only way to secure the hitch is through the hitch pin screw
Question:	I received two of these (returned the first one) both had a lot of cosmetic damage from shipping. Did anyone else have this issue
Answer:	I have had three bikes on the rack with no problem.I am sure it totaled more then 55 lbs.Like the rack and very well made.Also heavy duty.

Product features

CURT Trailer Hitches

At CURT, we think every hitch should offer a vehicle-specific design, meaning seamless integration and a reliable connection for your next adventure.

But our standards don't stop at vehicle-specific

To truly let you Bring It, our custom receiver hitches are made in the USA and have a co-cured finish of liquid Bonderite, inside and out, and durable powder coat.

We make over 1,000 different hitch models

Our hitches come in five classes, offering a range of weight capacities and receiver tube sizes. For nearly any vehicle and any adventure, you can Bring It with CURT.

Expertly engineered

We use actual vehicles and cutting-edge software to develop hitch designs that are strong, functional and tailor-made to fit your unique make and model.

Precisely welded

A combination of robotic welding and skilled manual welding ensures production efficiency, optimal strength, clean weld lines and a precise fit for each hitch.

Co-cured finish

For maximum protection, our hitches are mechanically descaled and co-cured in a liquid Bonderite undercoating, inside and out, and durable black powder coat finish.

Thoroughly tested

Our custom-fit trailer hitches are not only made in America, but every design is rigorously tested for safety and performance at our Detroit testing facility according to SAE J684 specifications.*

*J684 Surface Vehicle Standard issued 2014 from SAE International association for Trailer Couplings, Hitches and Safety Chains - Automotive Type

Discover the outdoors

Towing your camper or RV with a CURT hitch will leave you stress-free on your next outdoor adventure. Camping trips with family and friends build memories that last a lifetime. CURT offers the equipment needed to tow everything from teardrop trailers and popup campers to full-length travel trailers. Add even more adventure by utilizing the receiver tube of your hitch for a CURT hitch-mounted bike rack or cargo carrier.

Relax on the water

Do you find the bubbling sound of a boat motor therapeutic? Do you love lounging on the water with a fishing rod in one hand and a cold drink in the other? No matter where your next aquatic adventure lies, we offer the weight capacity to tow everything from a simple fishing boat to a small yacht. And with our co-cured finish applied to each custom hitch, moisture and rust will be the least of your worries.

Conquer new terrain

Is speed the adrenaline rush you need to get through your week? Do you live on the edge and constantly push yourself to new limits? Whatever your off-road vehicle of choice -- whether it's an ATV, dirt bike, snowmobile or dune buggy -- CURT has a hitch to tow your RV hauler or flatbed trailer. For added safety and security on the road, we also offer a variety of cargo straps to keep your toys locked down tight.

Master the job

Tough jobs require serious tools. From the farm to the construction site to the industrial park, CURT class 5 hitches are designed and tested to keep up with the hardworking lifestyle. We offer 2 and 2 1/2 inch receiver options with weight capacities up to 20,000 pounds, allowing you to tow anything from a heavy-duty livestock trailer to a tri-axle flatbed. No matter what the job demands, Bring It with a CURT hitch.

Product description

CURT hitch adapters can be used for many different purposes when hitching up a trailer. Whether a ball mount shank is too small or too large to fit into a receiver tube, a CURT adapter can make up the difference. Our adapters are built with exceptional strength and designed to be precisely fitted for their application. We carry trailer hitch adapters to accommodate both receiver tube openings and shanks of 1-1/4", 2" and 2-1/2" dimensions. CURT adapters also come in various lengths to allow more clearance for a cargo carrier, bike rake or spare tire. This CURT receiver adapter/extender converts a 2" x 2" receiver tube opening to a 1-1/4" x 1-1/4" opening. It installs easily and provides 4" of extra clearance for a bumper or spare tire. It has a gross trailer weight capacity of 3,500 lbs. and a tongue weight capacity of 350 lbs. This CURT adapter has a durable black powder coat finish to ensure excellent rust, chip and UV resistance.

• VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-inch receiver and accepts a 1-1/4-inch shank
• ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 4 inches of extra length to your hitch receiver. This provides additional clearance between your bumper and hitch accessory or trailer
• STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver. It also accepts any industry-standard 1-1/4-inch x 1-1/4-inch shank
• SOLID STRENGTH. This hitch receiver adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
• CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats

User questions & answers

Question:	Can this reducer be used for towing trailers or is it only for hitch accessories like bike carriers
Answer:	I believe mine came with the hardware. my mechanic installed it and didn't mention not having the appropriate bolts.
Question:	The description states the origin is usa. why do the reviews, etc., reference it being made in china. is the description purposely misleading
Answer:	No cutting was needed. I jacked up the rear of my Rav4 a few inches, put the hitch in place, tightened the 4 bolts and done. Took less that 30 minutes.
Question:	What is the length from the pin hole in 2 inch section to the end of hitch (1.25 inch end)? Thank you
Answer:	YES IT DOES! I have a 2019 Toyota rav4 Adventure series and it fits perfectly! Since the adventure series has a standard additional 4inch lift from the ground, it makes installing easy! NOTHING NEEDS TO BE TAKEN OFF(cept 4 peices of tape)! HITCH SLIDES RIGHT INTO PLACE AND PUT BOLTS ON. Just make sure you have a friend help out if this is your first time.
Question:	What are the hole sizes? I need 5/8" for the hitch and 1/2" for the bike rack
Answer:	Yes, fairly easily.

Product features

CURT Trailer Hitch Ball Mounts

CURT offers a wide range of trailer hitch ball mounts in different sizes and weight capacities to meet your needs. Our standard ball mounts are available with or without a pre-torqued trailer ball.

We also offer various specialized ball hitch mount options to provide reliable towing for any application, including multi-ball mounts, 3-inch shank ball mounts, deep drop ball mounts for lifted trucks and much more to let you Bring It no matter what you're towing!

Standard ball mounts

CURT offers a range of trailer hitch ball mounts with multiple shank sizes, capacities and degrees of drop and rise.

Heavy-duty ball mounts

We carry trailer hitch ball mounts with an extra-durable carbide powder coat finish and as much GTW capacity as 21,000 pounds.

Multi-use ball mounts

Our multi-use hitch ball mounts feature various ball sizes welded to the same shank to accommodate different trailers.

Adjustable hitch ball mounts

Our adjustable trailer hitch ball mount line allows for level towing of your vehicle and trailer and is perfect for multiple vehicle owners.

Three factors to consider

There are three main things to consider when selecting a trailer hitch ball mount: how much weight you are going to be towing, what size receiver tube your trailer hitch has and how much drop or rise your ball mount will need (below).

Trailer weight vs capacity

First, be sure to select a ball mount with enough gross trailer weight capacity to fit your trailer. Trailer weight is one of the most important aspects of towing, and you should never exceed the weight capacity of any component of your vehicle, trailer or trailer hitch setup.

Hitch receiver size

Next, determine what size shank you will need. Receiver tubes come in a handful of standard sizes, including 1-1/4, 2, 2-1/2 and sometimes 3 inches, so finding a ball mount to match is relatively easy.

How to determine drop or rise

After you know how much weight you will be towing and the size of your receiver tube, you will need to determine the drop or rise necessary for your trailer.

Drop or rise is the amount of height difference between the trailer and your tow vehicle, whether that difference is positive (rise) or negative (drop).

The diagram offers a quick explanation for how to determine your needed drop or rise. Take the distance from the ground to the top of the inside of your receiver tube opening (A), and subtract it from the distance from the ground to the bottom of the trailer coupler (B).

B minus A equals C, the drop or rise.

Product description

Whether you are an avid mountain biker or a casual rider, you will want CURT along for the ride. CURT bike racks offer both versatility and quality and are available in several different styles to fit your needs. The CURT bike rack support strap is a 1" x 61" strap designed to help stabilize a hitch-mounted bike rack. One end attaches to the bike rack and the other to the tow vehicle. The strap can then be tightened to the appropriate tension to ensure that the load is properly supported for travel. Though the bike rack support strap is required for any bike rack with a 1-1/4" shank, it is recommended for all CURT bike racks.

• Provides added stability and support for a hitch-mounted bike rack
• Vinyl-coated hook prevents scratches on painted surfaces (WARNING: Remove hook before opening or closing hatch or trunk)
• Features a generous 61-inch length
• Recommended for all hitch-mounted bike racks (failure to use a support strap with a 1-1/4-inch bike rack will void the warranty of the trailer hitch and bike rack)
• Required for all 1-1/4-inch hitch-mounted bike racks

User questions & answers

Question:	What about using this on a vehicle with a rear spoiler - I have a Honda Fit w/rear spoiler that the strap would go over
Answer:	We have a 2008 Prius with a small factory spoiler and use this strap. What matters is the bike rack and whether you can attach the strap high enough on the vertical post that the strap doesn't contact the spoiler or at least doesn't put much pressure on it. You could run a piece of string from top edge of rear hatch to the bike rack post and see if the string clears the spoiler and can be tied securely around rack post. Hope this helps.
Question:	How many pieces does this curt 18050 bike rack support strap have? one strap to attach to the trunk and another to attach to the rack? length of each
Answer:	one attachment to the trunk the other side wraps around the rack - Works Great, a must have, keeps the rack and bikes from bouncing around
Question:	That sucks about the warranty! does anyone know if it will fit an '01 honda cr-v
Answer:	Not using it voids the warranty? What a load of marketing ka ka.
Question:	So I've read that it's 62" or 72" long, but how wide is the strap
Answer:	It's about 1 - 1.5 inches wide

Product features

CURT Hitch Bike Racks

CURT hitch-mount bike racks are easy to use and keep your bikes fully secure for the road ahead. They are designed to install, as-needed, using your trailer hitch receiver.

CURT hitch bike racks are available in multiple sizes and styles to accommodate any biking adventure, whether you’re embarking on your own or taking along the whole family.

Tray-style cradles

Two horizontal cradles and a vertical arm provide three points of contact for each bike, cradling the wheels and keeping the bike fully secure.

Padded arms

Each of the vertical arms is covered with a rubber padding to firmly lock down onto the bike frame without scratching or marring the paint.

Anti-wobble shank

To prevent the bikes from swaying during travel, the tray-style bike rack mounts onto the trailer hitch receiver tube with a threaded pin and shank.

Fold-up sides

During the off-season, the tray-style bike rack is easy to store, featuring sides that fold up and allow the bike rack to fit into a shed or other compact storage space.

Clamp-on bike rack

The clamp-on hitch bike rack quickly and securely mounts onto virtually any standard 2-inch ball mount shank. It holds up to three bikes and offers maximum convenience, folding up and storing easily when not in use.

Standard hitch-mounted bike rack

These hitch bike racks are available to mount onto 1-1/4-inch or 2-inch trailer hitch receivers. They use adjustable rubber straps to accommodate a variety of bikes, and they are available to hold up to 5 bikes.

Premium hitch-mounted bike rack

The premium hitch bike rack is the perfect family bike rack, featuring tapered arms to accommodate multiple bike sizes, including adult bikes and kids bikes. These bike racks also feature adjustable rubber straps for secure travel.

Product description

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

• DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight, 350 lbs. tongue weight, 5,000 lbs. weight distribution capacity and 500 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
• VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
• FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
• RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
• EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota Sienna

User questions & answers

Question:	Does it really weight 62 pounds? Similar products weight 35 - 45 pounds. Thanks
Answer:	I know it fit my 2020 very well. I would assume it should fit a 2021. Best to call the manufacturer to be sure
Question:	does this come with trailor wire harness
Answer:	It should. It fit onto my 2020 Base Kia Soul with no modifications at all.
Question:	How high above the ground does it sit after installation? Is being too low an issue
Answer:	No you will have to costume your exhaust
Question:	Does it come with mount bolt? What size are they
Answer:	Worked great, easy to put on, easier with 2 people. Did not have to remove exhaust system, as YouTube videos said.

Product features

CURT Trailer Hitches

At CURT, we think every hitch should offer a vehicle-specific design, meaning seamless integration and a reliable connection for your next adventure.

But our standards don't stop at vehicle-specific

To truly let you Bring It, our custom receiver hitches are made in the USA and have a co-cured finish of liquid Bonderite, inside and out, and durable powder coat.

We make over 1,000 different hitch models

Our hitches come in five classes, offering a range of weight capacities and receiver tube sizes. For nearly any vehicle and any adventure, you can Bring It with CURT.

Expertly engineered

We use actual vehicles and cutting-edge software to develop hitch designs that are strong, functional and tailor-made to fit your unique make and model.

Precisely welded

A combination of robotic welding and skilled manual welding ensures production efficiency, optimal strength, clean weld lines and a precise fit for each hitch.

Co-cured finish

For maximum protection, our hitches are mechanically descaled and co-cured in a liquid Bonderite undercoating, inside and out, and durable black powder coat finish.

Thoroughly tested

Our custom-fit trailer hitches are not only made in America, but every design is rigorously tested for safety and performance at our Detroit testing facility according to SAE J684 specifications.*

*J684 Surface Vehicle Standard issued 2014 from SAE International association for Trailer Couplings, Hitches and Safety Chains - Automotive Type

Discover the outdoors

Towing your camper or RV with a CURT hitch will leave you stress-free on your next outdoor adventure. Camping trips with family and friends build memories that last a lifetime. CURT offers the equipment needed to tow everything from teardrop trailers and popup campers to full-length travel trailers. Add even more adventure by utilizing the receiver tube of your hitch for a CURT hitch-mounted bike rack or cargo carrier.

Relax on the water

Do you find the bubbling sound of a boat motor therapeutic? Do you love lounging on the water with a fishing rod in one hand and a cold drink in the other? No matter where your next aquatic adventure lies, we offer the weight capacity to tow everything from a simple fishing boat to a small yacht. And with our co-cured finish applied to each custom hitch, moisture and rust will be the least of your worries.

Conquer new terrain

Is speed the adrenaline rush you need to get through your week? Do you live on the edge and constantly push yourself to new limits? Whatever your off-road vehicle of choice -- whether it's an ATV, dirt bike, snowmobile or dune buggy -- CURT has a hitch to tow your RV hauler or flatbed trailer. For added safety and security on the road, we also offer a variety of cargo straps to keep your toys locked down tight.

Master the job

Tough jobs require serious tools. From the farm to the construction site to the industrial park, CURT class 5 hitches are designed and tested to keep up with the hardworking lifestyle. We offer 2 and 2 1/2 inch receiver options with weight capacities up to 20,000 pounds, allowing you to tow anything from a heavy-duty livestock trailer to a tri-axle flatbed. No matter what the job demands, Bring It with a CURT hitch.

Product description

Make your tow vehicle and trailer more secure by keeping them locked up tight with a CURT hitch lock. Like a hitch pin and clip, a hitch lock is designed to insert into the fastener hole in the side of a receiver tube in order to hold a ball mount or hitch-mounted accessory in place. While a CURT hitch pin does offer sufficient strength for keeping your ball mount firmly attached, a CURT hitch lock goes one step further. CURT hitch locks allow you to lock your ball mount into your trailer hitch, deterring theft and preventing anyone from detaching your trailer at the ball mount and towing away your property without your permission. This CURT hitch lock features a barbell design and comes with a 5/8" pin diameter to fit a 2" receiver tube size (usable pin length is 2.850"; will not work with double-walled receiver tubes). CURT barbell hitch locks are comprised of a pin with two end caps and a round locking mechanism. They are key-operated and activate with a simple 1/4-turn. They also come with a watertight dust cap to keep out the elements and prevent corrosion. For the ultimate in towing security, a hitch lock and coupler lock used together will provide security at both the vehicle-side and trailer-side of your towing setup. For your boat, ATV or camper, keep your toys more secure with CURT hitch locks.

• DEPENDABLE SECURITY. To protect your trailer and trailer hitch ball mount from theft, this locking hitch pin is made with high-strength steel construction
• EASY TO OPERATE. The barbell-style locking hitch pin promotes an impenetrable appearance to deter theft, and uses a simple 1/4-turn lock activation for convenient locking and unlocking as needed
• VERSATILE. With a 5/8-inch diameter pin and 2.85 inches of usable pin length, this receiver hitch lock fits virtually any 2-inch x 2-inch hitch receiver with a 5/8-inch hole (not compatible with double-walled receiver tubes)
• WATERTIGHT. The internal components of this hitch lock can easily be protected from the elements with the included watertight dust cap, while the entire hitch lock is shielded against corrosion with a durable powder coat finish
• TWO KEYS INCLUDED. For your convenience, two keys are included with this trailer hitch lock. You can keep the spare key in a discrete location for emergencies or give it to a friend for helpful access

User questions & answers

Question:	Is this hitch locked threaded? i have a curt 18086 hitch-mounted tray-style bike rack and would like to match the threading on the rack
Answer:	Unfortunately it is plastic :( However my uncle said he had one that lasted a really long time. And it looks really good on the truck. But is made of a lightweight plastic. It also does not come with the pin to hold it on the trailer hitch. But I found one on Amazon for about $3.
Question:	How does the paint hold up, any rush issues
Answer:	It really depends on the size of hitch receiver that you have. Great product. Easy step up.
Question:	Tried to install on my 2015 tundra and its to short anyone have this problem
Answer:	No
Question:	What is the tow capacity of this
Answer:	Yes it will fit. It will protect your truck from the texting and driving people. By the way, I had a puppy named Sugar Baby, I wasn't as lucky as Dorothy, I lost her to the witch and she was euthanized.

Product features

Find a Trailer Hitch Lock from CURT

CURT provides you with the best trailer hitch locks for your towing setup, so you and your crew can make the most of your adventure.

A trailer hitch lock quickly and easily installs into your trailer hitch receiver and acts as a locking trailer hitch pin for increased security and peace of mind.

Choose from several different sizes, styles and material options to find the best trailer hitch lock for your lifestyle!

Fast, easy operation

Nearly all CURT trailer hitch lock styles come with quarter-turn lock activation, meaning the key only needs to be turned 90 degrees to open. This makes unlocking the hitch lock fast, easy and convenient whenever hitching up your vehicle and trailer.

Watertight dust cap

CURT hitch locks are equipped to face the outdoor elements, featuring an included dust cap that protects the internal locking mechanism. The components of the locking hitch pin are sealed off from rain water, dirt, road salt and other corrosive elements.

Enhanced corrosion resistance

To protect the locking hitch pin from the harshness of changing weather and the outdoors, CURT hitch locks come in a variety of durable finish options, including stainless steel options for maximum corrosion resistance.

Two keys included

To make your life and your towing adventure as convenient as possible, each CURT locking trailer hitch pin comes with two keys. This allows you to carry one and store the other in a safe location or give a friend equal access to your trailer hitch setup.

Right-angle hitch lock

The CURT right-angle trailer hitch lock is extremely easy to handle and operate, featuring key access on the receiver tube side of the hitch. No straining or struggling to reach the key hole from the side!

Barbell hitch lock

This classic trailer hitch lock style is sleek, subtle and highly reliable, featuring an impenetrable look and key access on the side of the receiver. This hitch lock makes a great replacement for a standard hitch pin.

Deadbolt hitch lock

The deadbolt-style trailer hitch lock mimics the design of a hitch pin but replaces the hitch clip with a heavy-duty lock. This locking hitch pin is easy to install, lock, unlock and store as needed.