10 best canoe carrier

Product description

FEATURES of the Thule Portage Canor Carrier Durable gunwales with cushioned base pads secure canoe for transport Gunwales with ramped sides for easy loading Soft, weather resistant base padding protects canoe during transit Includes all center straps with buckle bumpers and bow/stern tie-downs to transport one canoe Fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket (no loose parts)

• Durable gunwales with cushioned base pads secure canoe for transport
• Gunwales with ramped sides for easy loading
• Soft, weather resistant base padding protects canoe during transit. Length of straps: 2x15 Feet
• Includes all center straps with buckle bumpers and bow/stern tie-downs to transport one canoe
• FlipFit bracket fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket. Fits flush to Thule AeroBlade with Xadapt12 T-track hardware kit (sold separately)

User questions & answers

Question:	Will this fit on the crossbars of my 2004 Toyota Highlander
Answer:	Thank you for contacting Thule! Yes, this will fit.
Question:	We have a ford escape suv, we want to carry a 16 foot canoe that is 65 lbs. will this carrier work for that
Answer:	Yes it should. Our canoe is over 90lbs and its a four person so plenty long. Will just hang past the front and back of the car. Just make sure the width of your boat isn't wider than your racks.
Question:	Will this fit a 2013 Nissan Xterra factory rack
Answer:	The dimensions of the Thule factory bar are much smaller than the xterra but I think you'll be OK. The clips are actually too big for the factory unit.
Question:	I have a 2014 ford flex with no roof rack. does this fit my car or do i need a roof rack to mount this to
Answer:	Jessica:Thanks for checking with Thule. If you do not have a FI Rack from Ford, you can use the Thule 480 Traverse Foot Pack, Thule Fit Kit 1518 which is specific to the 2014 Ford Flex, and LB 58 load bars. That would create a platform to put the 819 Portage onto.

Product description

Carry your canoe on your car thanks to this high-quality CANOE CAR TOP CARRIER kit. This car top carrier includes heavy-duty adjustable straps and non-skid foam blocks to safely and easily carry your canoe on most vehicles. You can also get carry CART to easily carry your canoe from your car to the water.

• Fits any car models and sizes and any canoe
• Fits bare roof, any factory racks system, or non factory rack system such as Thule, Sport Rack, Yakima, Rhino-rack, etc.
• Includes: 4 soft foam pads, 2 straps with metal hooks, 2 small straps with buckle and metal hooks, 1 strap with buckle, 1 storage mesh bag
• Includes safety non-skid foam blocks to protect car and canoe
• Quick and easy to set up and adjust

Product features

Cartop Carrier Kit Canoe

The choice of materials used is meticulously examined and evaluated in order to meet or surpass the highest quality standards in the industry.

COMPATIBILITY

Extremely practical, this carrying kit works with any canoe up to 32in. wide and 14ft. long. Keep in mind, that it's important to check the maximum load recommended by your vehicle manufacturer before installing your boat.

EASY TO USE

It's an all included kit. Quick and easy to use. It fits most vehicles due to the adjustable straps and four piece foam blocks. It will allow you to transport your boat without any trouble.

LIGHTWEIGHT

Due to the quality materials used, this kit is really light and easy to store. It also comes with one storage mesh bag.

FOAM

This carrying kit includes 4 soft foam pads of 6.5 x 4 x 3.3 inches. (17 x 10 x 8 cm). The pads are made of EVA. EVA is a very flexible and elastic component that offers better shock resistance when you travel with your canoe. It also has adhesive properties that ensure that the pads stay in place on your car while driving. Simply place them on the roof of your car and install your boat on them.

• Practical: Use the ABN Universal Boat Carrier to cart your kayak, canoe, paddleboard, float mat, or jon boat
• Durable: Has a 200-pound weight limit; Constructed from high-strength anodized steel to ensure longevity while also keeping the carrying weight at a minimum (8lbs)
• Tire Design: 9.5” knobby tires that are easy to inflate; Allows for smooth movement across rough surfaces such as sand, gravel, and through wooded areas
• Features: Oversized foam bumper pads protect your vessel from scratches or dents; Designed with a 12-foot tie down strap to secure your vessel; Includes a spring-loaded kickstand for quick and easy loading
• Compact: Folds for easy storage and transport; Tires can be easily removed with the lynch pin; Entire carrier can be stored in a large backpack or in your vessel while on the water

User questions & answers

Question:	how does this work for paddleboards
Answer:	I would say very similar to how it works on a kayak. It is strapped toward one end of the vessel and should roll easily
Question:	I will be using this on a six day 165 mi canoe trip. How small does this fold up and how much does it weigh? Size and weight matters
Answer:	It folds up to a pretty compact size but it will take up space in your canoe for the trip while you're in the water. It depends on how big the canoe is and how much space you have for cargo during your canoe trip.
Question:	Can I hook this to the back of my golf cart
Answer:	No, the carrier is place to the rear of the Kayak. You might be able to attach the front of the Kayak to the rear of the golf cart although it is doubtful the Kayak will stay on the carrier if you reach hit bumps, holes or rocks or increase speed. This carrier is made so you place the wheels under the Kayak toward the rear and pull the Kayak from its front strap.
Question:	Would this work for a Hobie 14' Pro Angler
Answer:	My one person kayak is 50lbs and I transport about 100 meters from my house to the water's edge. Your hobie 14 is 122lbs empty. I do not think this is the correct carrier for you. You need a wider/stronger carrier.

Product features

About Universal Boat Carrier – Trolley for Carrying Kayaks, Canoes, Paddleboards, Float Mats, and Jon Boats

Stop dragging your kayaks and canoes on damaging surfaces! With ABN's Universal Boat Carrier, you can focus on getting onto the water hassle-free.



 

Universal Carrier

Every outdoor enthusiast needs the ABN Universal Boat Carrier. It takes the hassle out of transporting items and works great with a variety of watercrafts. 

Simple and Convenient

The cart's 9-½” knobby tires are easy to inflate (bike pump not included) and allow for streamlined movement over a variety of terrain.

Portable

The carrier folds down for simple storage and transport.



The tires can be quickly removed with the removal of lynch pin and can be conveniently stored in a large backpack or right in the kayak with you while out exploring on the water.

 

Practical

The ABN Universal Boat Carrier includes a 12-foot tie down strap to secure your kayak, paddle board, boat, or floating mat and a spring-loaded kickstand provides for for quick and easy loading.



It also includes oversized foam pads to protect your kayak from getting scratches or dents while in use.

 

Durable

Constructed from high-strength anodized steel to ensure longevity while also keeping the carrying weight at a minimum (8lbs). 



The ABN Universal Boat Carrier has a 200-pound weight limit.

Who We Are

Auto Body Now is a family owned company based out of South Dakota. We provide the Midwest with the highest quality auto body supplies and car care products on the market. We have an exceptionally strong Internet presence, sending over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.

Product description

The Malone MPG156 Standard Canoe Kit is a great way to keep the budget down and transport a canoe. The 6" gunnel style non-skid blocks feature a universal cut-out profile that fits round, square and oval load bars. Includes two 15' load straps and two safety tie-downs. Made in the USA with EVA closed cell foam.

An ideal budget option for canoeists, the Malone standard canoe kit includes everything you need to haul a single canoe on short trips. The canoe kit comes with four 6-inch non-skid universal foam blocks to hold the canoe in place, along with two 15-foot tie-down cords, a 15-foot heavy-duty strap, a set of bow and stern safety tie-downs, and four S-hooks. The blocks are made of high-quality EVA closed-cell foam, ensuring a soft ride for your canoe. The tie-downs, meanwhile, fit to the front, rear, and sides of your vehicle for maximum safety. (The kit also fits round, square, or factory oval cross rails.) Finally, the kit comes with a re-usable storage container and carrying case.

About Malone Auto Racks

Malone is the fastest-growing rack accessory company in North America, with a track record of more than 10 years of industry leadership and innovation. The company's products are sold in more than 1,500 outdoor online and retail stores throughout the U.S., Canada, Australia, and Europe. Malone operates from the coast of Maine, helping the company stay true to its mission and values. Everything Malone sells must be "simple to sell, simple to install, and simple to use." The company is built to enhance its customers' enjoyment of rivers, lakes, and oceans while minimizing their carbon footprint through aerodynamic transport design and complete material recycling.

• 6" long non-skid EVA foam universal fit blocks
• 15' cam buckle load straps to secure the canoe
• Safety tie-downs to fully ensure a safe installation
• Travel tote that holds the kit when not in use
• One Year Limited Warranty

User questions & answers

Question:	will this work for an 11' single kayak
Answer:	No. The blocks are designed to attach to the gunwales of a canoe. Kayaks don't have a true gunwale to attach the blocks to.
Question:	Will these blocks fit 3" wide roof rack cross-bars
Answer:	I would guess that they do; I just use them on the bare roof. If you have a roof rack and are just looking for some padding, try cutting up a piece of "pool noodle".
Question:	Is this product safe to use in speeds up to 75mph? Or would the canoe be likely to catch wind and fall off
Answer:	We have not had any issues with this product. The foam blocks really just protect the car. Wind can go straight through from front to back, so the canoe doesn't catch wind as you mention.
Question:	Does this kit require a roof rack already installed on the vehicle
Answer:	No, but you will be running the tie down straps through the vehicle. Do not tie only the bow and stern to go on the road, this would be extremely dangerous. Even if you drive slow when you meet a truck it will rip the boat off the vehicle or at the least knock it off the top of the vehicle. I have never used these but here maybe your solution of no rack in combination with the foam blocks. Rightline Gear 100605 Saddlebag Car Clips

Product description

Transport a single canoe or kayak from the parking lot to the lake easily and hassle free with our Canoe and Kayak Dolly. It is designed to hold a canoe/kayak by the hull in a V-shaped cradle with 3-1/2 "L foam bumpers on each arm. Cradle arms are connected together with a 13" nylon strap to prevent the cradle from opening too far.

• Capacity : 150-Pound 12 Ft long tie-down strap. Solid Metal frame; foam bumpers on each arm to protect your Canoe / Kayak hull
• Large(9-1/2"D) flat-free tires (3-1/2" wide) roll smoothly across sand and gravel. Stainless steel fasteners and chrome lynch pin. Quick assembly
• Material : Aluminum pipe (20 x2mm) anodized Stainless steel. Works great as a kayak or canoe dolly. Dolly breaks down for easy storage or transport
• Part of the support stand features a 9-1/4"H spring-loaded stand which keeps the dolly cart propped up onshore for quick loading out of water
• Large 9-1/2" diameter flat-free tires provide stable support on uneven terrain which is especially useful in sandy areas

User questions & answers

Question:	Has anyone attempted to fit this inside the cargo hatch of their kayak? I have a 16 ft Perception Captiva
Answer:	I just measured inside to inside of bed of 2002 Toyota Tacoma from left side to right side and it measures 57 1/2" and I have 1 1/2" to spare on the connecting tube before top tubes touch each other leading me to say the minimum bed width from left to right is 56". Hope that helps!
Question:	how do you strap on a kyack
Answer:	It should fit as the width is easily adjustable. I did not bolt mine down. I used these clamps. http://www.amazon.com/API-Mounting-Clamps-Camper-Shells/dp/B002S4GS48/ref=pd_cp_hi_1 Worked great for hauling my 15' canoe.
Question:	Has anyone tried to use this for SUP (Stand Up Paddle)? I am wondering about this since it has a "V" shape that might not fit with the SUP
Answer:	There's an interior bar that connects the two pillars that attach to the bed rail. This bar allows you to expand the width, however there are horizontal bars coming from those pillars that measure about 2.5' each thus you 5' minimum width. I had the same issue with my ranger, 4.7 width. You can cut back the 3" from those bars and still be able to fasten the interior bar. For the price difference that's what I'd recommend.
Question:	I want to be able to walk about one mile using this with a ten foot sit on top kayak. Would this work
Answer:	no they not. you will have to remove the c-channel track. so if you have to do that, remove the bed rail top cap, then you will see that there is already holes (for post)made in bed that will allow you to just drop in easy home made or bought ladder rack. so safe your money and don't damage your bed.

Product features

Canoe and Kayak Transport Cart Dolly

Transport a single canoe or kayak from the parking lot to the lake easily and hassle free with our Canoe and Kayak Dolly. It is designed to hold a canoe/kayak by the hull in a V-shaped cradle with 3-1/2 inches L foam bumpers on each arm. Cradle arms are connected together with a 13 inches nylon strap to prevent the cradle from opening too far. Part of the support stand features a 9-1/4 inches H spring-loaded stand which keeps the dolly cart propped up onshore for quick loading out of water. Large 9-1/2 inches diameter flat free tires provide stable support on uneven terrain which is especially useful in sandy areas. Easily rest a kayak or canoe on the dolly cart platform, strap it down and it's ready to go. It is foldable, easy for storage.

Storage and Installation

Dolly breaks down for easy and convenient storage or transport.Quick assembly, only wheels need to be attached.

Frame

Solid Metal frame; foam bumpers on each arm to protect your Canoe / Kayak hull.Sturdy double-leg kickstand allows easy loading.Stainless steel fasteners and chrome lynch pin.

Tires

Comes with two Large(9-1/2 inches D) flat free tires (3-1/2 inches wide) roll smoothly across sand and gravel.Tires are not for highway use. Weight capacity: 150 pounds.

Strap

12 Feet long tie-down strap with buckle, easy to install.

Product description

Packaged with foam blocks in reusable mesh dunk bag with cord lock. Includes 4- wide mouth foam blocks, 3-20" straps with cam buckle and S-hook, 3-9' straps with sewn loop, 2-18' strap with cam buckle and instructions. Regular has 4- standard mouth foam blocks. Made in USA.

• Packaged with foam blocks in reusable mesh dunk bag with cord lock
• Includes 4- wide mouth foam blocks
• 3-20" straps with cam buckle and S-hook
• 3-9' straps with sewn loop
• 2-18' strap with cam buckle

User questions & answers

Question:	Will this work without roof racks installed meaning “can I just sit the foam blocks on the car and ratchet the straps down
Answer:	I bought a similar setup and the foam blocks preclude the need for roof racks BUT do you have somewhere to apply the hooks on the tie-down straps? I have a roof rack so the tie-downs were not an issue.

• Universal fitment - fits most popular brands of roof rack crossbars
• Front/rear pads engineered to fit a variety of hull shapes
• 180 degree rotation to allow loading from the side
• Large 2.95" x 7.87" contact surface area per cradle
• 5 Year Warranty

User questions & answers

Question:	Would this be compaible on a TracRac One system
Answer:	this will NOT fit your Trac Rack system.
Question:	Will this work on a 2017 Subaru Forester with the large rear spoiler
Answer:	I don’t know what you’re asking. If you can mount the cross bars, I don’t see why not.
Question:	I need to mount a 15 foot canoe right side up (gunwale up) on top of a truck camper shell. Will this work
Answer:	It could work, but it is NOT intended to carry a canoe in that manner. The shape of the hull, depending on how steep it is, could make it impossible if the canoe touches the crossbars before the cradles make contact.
Question:	I have a bed mounted tracrac and the cross bars are 4" wide, will these mount to a 4" wide cross bar
Answer:	Dear Sirs,Thanks for the question, not this will not fit your tracrac.Thank youautopartstoys

Product features

Rhino-Rack Nautic Series 570 Side Loading Canoe/Kayak Carrier

Experience the very latest in kayak carrying technology with the Nautic 570 Side Loading Kayak Carrier. Rhino-Rack's Nautic 570 is locally built by engineers with first-hand kayaking experience and features the next generation in design and technology.

The Nautic 570 comes complete with 4 santoprene rubber pads designed to cushion your kayak and the unique 180 degree rotation makes it easy for side mounting.

About Rhino-Rack

Rhino-Rack has been creating world-class roof racks since 1992. Today we’re the the proud owner of Australia’s most diverse and innovative range of roof rack products, supplying high-quality gear to all industry segments.

We’re there for the tradies.

When you need reliable gear that works as hard as you do, look no further than our massive range of Heavy Duty roof racks, ladder racks, trays, conduits and more.

We’re there for the sportsmen.

Loading your bikes, kayaks, canoes, skis and snowboards has never been easier - meaning we help you get out on the track, water or slopes quicker than ever before.

We’re there for the sun-seekers and nature lovers.

Indulge your taste for adventure with a Rhino-Rack Batwing awning, boat loader, luggage basket or fishing-rod holders. Everything the Aussie camper needs for the ultimate getaway.

Our Story

It all began in 1992 when the very first Rhino Rack was born. Like all births, it was wonderful, inspiring, and a little bit messy. But pretty soon we realised we were onto something solid, and the next 20 years saw Rhino-Rack grow steadily, developing an extensive range of high-quality roof rack systems and accessories.

Today we have over 120 employees across our manufacturing and warehousing departments in Australia, USA and New Zealand. Thanks to our hardworking staff and loyal customer base, we’re able to export to 25 other countries, making Rhino-Rack an international brand as well as a locally grown product.

What we believe in

Our customers are our priority. We’re not happy unless you guys are, and we promise to deliver on the Rhino-Rack promise of quality design and affordable pricing every time.

Offering a premium product is also important to us. Everything we sell is made and tested to strict Australian standards. We also work with car manufacturers to make sure we’re completely on the ball with the latest vehicle trends, and tailoring Rhino-Rack products to make sure they’re the very best on the current market.

Rhino-Rack is strongly committed to the protection of the environment, and we work hard to minimise our environmental impact right across the board - from design, right through to manufacture and distribution. Our environmental protection goals include preventing pollution, ensuring our site operations don’t endanger health or safety, and constantly looking for ways to reduce our environmental impact even further.

Product description

Material: stainless steel

Size: 26.5"L x 19.3"W x 16.3"H

Size(folded): 17.2"L x 13.2"W

Tire: 10"D x 3"W

• Sturdy Kayak Trolley - With solid aluminium frame and sturdy double-leg kickstand, MorTime Kayak Trolley can withstand up to 165 lb. MorTime Kayak Trolley is made from high-strength anodized steel. And the sturdy construction ensures durability and longevity.
• Solid Tires - Large solid knobby tires (10"D x 3"W) is made from high quality PU with no chemical smell. The tires are easy to inflate and roll can smoothly across rough surfaces such as sand gravel and wooded areas.
• Best Design - You can load or fold MorTime Universal Kayak Trolley quickly without any tool thanks to the spring-loaded kickstand. Multiple fulcrums ensure better load-bearing capability. Besides, there are foam bumper pads on each arm to protect your canoe / kayak from dents or scratches and bumpers on the feet to protect Kayak Trolley from wearing.
• Easy Assembly - MorTime Kayak Carrier can be assembled firmly with stainless steel fasteners. With the chrome lynch pin, you can attach or remove the tires easily. Featured with a 12 ft tie down strap, you can secure your vessel firmly. It is universal for most canoes and kayaks.
• Easy Storage - MorTime Kayak Carrier is compact and convenient for storage and carrying. MorTime Universal Kayak Trolley makes it hassle free to transport your canoe / kayak from the parking lot to the lake or seaside. Enjoy your time!

User questions & answers

Question:	What are the extra two straps with metal ends for
Answer:	Extra's
Question:	Does this fold flat - for when not in use
Answer:	Yes. But to get really flat, you need to take wheels off, which is really easy. No tool of any kind required. For those who have kayak with cargo strap areas. it is possible to secure to your kayak.
Question:	Will this work with the intex mariner 4 dingy boat
Answer:	not familiar with this boat.
Question:	will this work with a 5 seat pedal boat
Answer:	Not sure sorry

Product description

There may be divas on your road trip, but this boat carrier is very low maintenance. With multiple settings, the JayLow allows you to carry one boat in J-Cradle position, 2 boats in vertical position plus folds down when not in use. Weight: 11.00 lbs. Dimensions: L 6.69 in x W 6.00 in x H 20.00 in.

• CARRY UP TO 2 KAYAKS: Fits 1 kayak in J-cradle position (up to 80 lbs.) or 2 kayaks in a vertical, stacked position (up to 110 lbs. combined)
• Fits most crossbars: Compatible with Yakima SteamLine and round, square, factory and aerodynamic crossbars; Minimum crossbar spread of 24"
• Includes straps: Includes all the necessary hardware and straps (Heavy-Duty Straps and Bow/Stern Tie-Downs) to secure your gear; SKS (Same Key System) locks sold separately
• Versatile design: Integrated cam lever allows you to adjust the upright position with ease; Rack also folds flat when you're not using it for better clearance and reduced drag
• Easy install: Comes fully assembled out of the box; Tool-free installation in about 10 minutes; Refer to Yakima Fit My Car Tool to ensure compatibility

User questions & answers

Question:	How many SKS locks do I need to buy for the rack
Answer:	You will need a 2 pack of the Yakima SKS lock cores to lock the JayLow's to the crossbar.
Question:	Any ideas on how to get a 52 lb. kayak up on the Jaylows by yourself
Answer:	My 16' kayak weighs 56 lbs. I line it up on the side of my car so that the cockpit is between the front and back bars, more or less. I lift the front and "walk" it with my hands until my hands are up over my head, then I lean the front 1/3-1/2 of the kayak against the front jay hook (cockpit out). It helps if the rear end of the boat is in grass or something that doesn't slide. Next I step a couple of steps to the rear of the cockpit and, with one hand grasping the cockpit and the other cradling under the back of the boat, I heave it up onto the rear jayhook. I'm 5'7" (female) and can do this in about 1 minute. I can barely lift the kayak by myself, but doing it 1/2 a boat at a time is super easy.
Question:	Can i please get a detailed answer on how to stop the whistling that these jaylow carriers make? i have a faring already
Answer:	Duct tape over holes on bottom will stop the whistling.
Question:	Will this rack really carry two kayak's? To carry two kayak's do you need additional hardware or straps
Answer:	We have not used these racks for 2 kayaks, we just bought 2 racks. BUT..... We have 4 kayaks and will try it someday. I can see how this rack will work for two, it just needs to be positioned perfectly vertically, instead of leaning back slightly. You will need another set of straps, preferablly two for around the main body and a bow and stern strap. We really like our Jaylow carriers, they are very easy to install and adjust, and very easy to load one kayak onto. You will need two people to put on the second kayak though, because the second kayak won't have the cradle bracket to hold it in place on the back of the bracket.

Product features

There may be divas on your road trip, but this boat carrier is very low maintenance

With multiple settings, the JayLow allows you to carry one boat in J-Cradle position, two boats in vertical position plus folds down when not in use.

Carries any type of kayak

Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position.

Extra Padded Contact Points

Durable padded contact points provide protection and grip while traveling.

SKS Lockable

Locks to base rack with SKS Lock Cores for added security (sold separately).

Includes Straps and Tie-Down

Includes Heavy-Duty Straps and Bow/Stern Tie-Downs.

• Suitable for all Vhehicle Models- Universal soft roof rack pads are suitable for all models. Use straps to fix Marine/kayak/canoe/SUP board/surfboard/ladder/snowboard, etc., so you can transport goods easily and safely.
• Transport Safety and Provide Protection - When operating the vehicle at high speed, you should regularly check the safety of the kayak and ropes; the aerodynamic design can protect your cargo when it is fixed to the luggage rack. It is light and compact and easy to store.
• How to Use? - Secure the roof rack pads to the roof of the vehicle with a nylon rope, and fix your kayak to the roof of the car with another nylon rope. Two ropes are wound inside the vehicle (the door opens instead of the window), connecting the bow and stern of the kayak to the front and rear of the vehicle. Tighten the adjustable nylon cord with a padded cam lock to provide a firm grip for your load.
• Package Include - The package contains suction anchor with fixed piece. The suction anchor is made of sturdy materials (ABS and PVC) with high strength and durability. The maximum load-bearing capacity is 176lbs / 80kg. Please keep the handle upward when not in use. It also comes with high-quality braided nylon ropes and steel hooks. Use this quick release pulley to fix and tie the bow and stern of the kayak/canoe/boat.
• Easy to Clean - The soft roof rack pads come with all necessary accessories and straps to fix the pad to the roof of the car and secure the load in place. Foldable design, just unfasten the belt and clean it when not in use, and then put it in the provided bag.

User questions & answers

Question:	Are these safe for the highway or road
Answer:	The roof rack pads are firm, reliable, and easy to install, with thick built-in padding, highly recommended
Question:	We have a Toyota with side rails on the roof (not crossbars), would these fit
Answer:	This roof rack pads will fit perfectly. I am also a Toyota. It is easy to transport and equipped with belts, which is very suitable for long-distance travel! ! !
Question:	Will this fit a Jeep 1997 sport
Answer:	Yes, it will fit perfectly. A rope and anchor are also included in the package to help fix it.

Product features

Car Carrier Racks Rooftop Mount Accessories

for Kayak

for Surfboard

for SUP

for Canoe

for Paddle Boards

for Vehicles Without Crossbars

for SKIS

for Ladder

Tie-Down Straps

Fixed rope

Fixed anchor

Storage Bag

Waterproof characteristics:

1. In severe weather, keep it fixed

2. Convenient for transportation and equipped with belt

3. The rope is tighter and safer

Easy to install and clean:

1. No tools required, folding design

2. Just unfasten the belt and clean it when not in use

3. Put it in the bag provided

Anti-seismic & reduce wind noise:

1. The built-in non-slip mat plays a protective role

2. High-grade EVA foam padding can provide a soft landing effect for your cargo

3. Effectively reduce vibration during transportation