10 best grill guards for ford f150

• 【Perfect Fit】 This glossy bull bar Compatible for 2004-2020 Ford F150(Excludes Raptor/Ecoboost/Heritage Edition)/2003-2017 Expedition/2007-2017 Lincoln MK-LT.
• 【Surface Finish】The push guard is made up of a 3" heavy duty tubing frame that offers the best in durability and strength. A special e-coating and black powder coating finish are applied to make it rust-resistant. Seamlessly welded with a smooth appearance.
• 【Outstanding Design】Features pre-drilled holes to easily add additional lighting. The anti-rust skid plate can be removed. This Ford F150 guard bar not only gives your vehicle a new look, but also adds more protection.
• 【Easy to Install】100% bolt-on installation, no drilling required. Installation can be done easily in a home garage using common tools. (All mounting hardware and installation instructions are included.)
• If you receive a product with dents and scratches on the surface, or have any hardware and brackets missing; or have any questions about the installation. Please feel free to contact us.

User questions & answers

Question:	Le quedará esta parte a mi camioneta Toyota Tacoma
Answer:	One piece, think of it like a book cover sleeve that protect front and back using magnetic suction.
Question:	do you have the mounting brackets for a 2018 toyota tundra
Answer:	Yes, you can use an screen protector tempered glass.
Question:	Will this interfere with my collision assist? 2019 F150 4X4 Sport
Answer:	I think it’s one year and Amazon offers extended warranty for 4 yrs for $9.99
Question:	If this bar will not fit 2018 ford f150, then why in the title advertised as a "bull bar 04-18 ford f
Answer:	You can use a length of PV extension wire that has a male MC4 connector on one end and a female MC4 connector on the other end. You could buy for example a 50ft length of wire and cut it in half to get 2x25ft lengths with MC4 connectors to go into the panel and bare wire to then go into the MPPT charge controller.

Product description

Westin's HDX Grille Guard is made for heavy duty use with its 2 inch diameter tube frame. The HDX Grille Guard is made of a 1-piece welded construction. The wing's interior and bottom support tubes are 1.25 inch in diameter. Uprights are fully lined with 1/8 inch thick and 2 inch wide rubber strips to protect the grille guard from bumps and scrapes. The HDX Grille Guard also features a full punch plate center grille to intercept impact from flying debris. Optional Light Clamps are available, 57-0000 in stainless and 57-0005 in black, which allow lights to be mounted to the cross tube and punch plate. HDX Grille Guards are available in stainless steel and black powder coat.

• 2in tube, full wrap-around wings
• Full "Punch Plate" grille
• 1-Piece welded uprights
• HD rubber upright strips
• 1.25in tube for support wings

User questions & answers

Question:	Will this mount on a truck with a raptor grille
Answer:	I don't think it is compatible with a raptor. But it shouldn't matter what grill your F150 has. The upper brackets mount just below the grill behind the top of the bumper.
Question:	can a winch be mounted to this
Answer:	No, you cannot mount a winch directly to HDX Grille Guard #57-3835.
Question:	Does this fit a 2006 chevy silverado 1500 series 4x4? I would love to get this if so
Answer:	The one I did the review on is for a 2015 f150. You will want to go to Westin’s website and double check part numbers
Question:	Does this fit a VW golf
Answer:	i dont think it would even fit inside a VW golf...

Product description

> Hunter Grille Guards provide customized front end protection for the headlight and grill areas of the vehicle

> Each grill guard is designed specifically for its vehicle model, contouring to the lines of the front end while providing an easy, hassle free installation with no drilling required

> Polished 304 stainless steel on all tubing and uprights

> Each box includes all the necessary mounting hardware, 2 headlight guards, and a center piece

> For some vehicles the center piece may require assembly



THIS MODEL IS DESIGNED FOR VEHICLES LISTED BELOW



> 2009 - 2014 Ford F-150 (4WD or 2WD w/ tow hooks)



NOTE:

Amazon fitment table may not display correctly. Title description 100% correct.

• Hunter Grille Guards provide customized front end protection for the headlight and grill areas of the
• Thick rubber protectors on uprights, Removable headlight guards
• All mounting bracket kit included
• No Drill installation
• Limited 5-year Warranty, Factory Direct Price

Product description

Package Included:

Modular bull bar 1 set

License plate bracket

20" LED light bar

Mounting Brackets

Mounting Hardware

Installation Instruction

About us

BETTER AUTOMOTIVE we specialize in high quality aftermarket truck & SUV accessories for the Truck, SUV and CUV enthusiasts. With more than 20 years’ experience in the auto accessories manufacturing and have been one of America top online suppliers. With professional auto applications research and fitment testing, BA has been the leader on understanding what the community demands and what it thrives on. BETTER AUTOMOTIVE has been providing the customers years of insurmountable service. Trust and satisfaction is our commitment on custom manufacturing and continuously investing in our product development to create the best innovation product in the industry. With top notch customer service & fully understanding of market are the goal and foundation of our company.

• FITS PERFECTLY - Custom fit for 2004-2021 F150 (Exclude Heritage edition & 10-14 F150 Raptor models & 2020 Diesel models) (Please check with dealer to confirm the right model of your vehicle before ordering.)
• OUTSTANDING DESIGN - BETTER AUTOMOTIVE Predator Bull Bar with 20" LED light bar delivers 4050 lumens in a bright flood beam. The LED bar power comes complete with factory style wiring harness. (LED Lights included in the kit).
• SURFACE FINISH - BETTER AUTOMOTIVE Predator Bull Bar made of heavy-duty all-steel frame, solid and durable. It is consisted of five parts mainly, increase your DIY fun and equip your truck. BETTER AUTOMOTIVE dual stage fine textured black finish for rust resistance and customized look!
• EASY TO INSTALL - Easy bolt-on installation. No drilling required ("No tow hook" model should be cut on the bumper according to the instruction). Installation may interfere with front bumper mounted sensors. All mounting hardware and Installation instruction included.
• NO-HASSLE WARRANTY - BETTER AUTOMOTIVE 5-Year warranty against manufacturing defects!

User questions & answers

Question:	Does this interfere with any sensors or cameras on a 2017 F150 Platinum with 360 degree cameras and parking sensors
Answer:	It may interfere with front sensors.
Question:	Compatible with adaptive cruise control
Answer:	Yes, no effect.

Product description

Hunter Grille Guards provide customized front end protection for the headlight and grille areas of the vehicle.

Each grille guard is designed specifically for that vehicle model, contouring to the lines of the front end while providing an easy, hassle free installation with no drilling required.

Black: Durable Five-Stage powder-coated finish resists chipping and fading.



DESIGNED FOR VEHICLES BELOW

06-08 F-150 (2X4) 2-Wheel drive

No need to cut out tow hook access hole on bumper

Main bracket goes under bumper with MINOR trimming of air dam



NOTE:

Amazon fitment table may not display correctly. Title description 100% correct.

• 2-Wheel Drive Only; Main bracket goes under bumper with MINOR trimming of air dam
• Durable Five-Stage black powder coated finish
• Removable headlight guards, All mounting bracket kit included
• No Drill installation
• Limited 5-year Warranty

User questions & answers

Question:	What is it that makes this not compatible with 4wd models? I just bought this grill guard used for my 4wd F150. Will it not work
Answer:	Not sure why they state it's not compatible, I installed it on my 2006 f150 4x4, fits great.
Question:	Does this brush guard fit 2006 f150 4x
Answer:	Yes it does!!
Question:	How much does it weigh
Answer:	When the box’s showed up it was like 240lbs.

Product description

• 100% Brand New In Stock
• Custom Designed To Fit Your Specific Application
• Provide Front Bumper & Grille Protection / Brush Guarding For Off-Road Use
• Dramatically Improve Accessibility & Appearance Of Your Vehicle
• Include Installation Instruction for Bull Bar ONLY
• Professional Installation Is Always Highly Recommended
• Water Resistant LED Designed To Increase Visibility During Off Road, Heavy Rain, Snow, Dense Fog & Night Time Driving


* Technical Tips: Drive Over Curbs, Trees And Rocks Without Worries - The Heavy-Duty Rugged Frame Means Your Front End Is Covered Against Damage From A Lack Of Ground Clearance.

** Installation Notes: Our Bull Bars Are Designed For Easy Bolt-On Installation That doesn't Require Drilling

• Application: For 2004-2020 Ford F150 Models, 2003-2017 Ford Expedition All Models, 2003-2014 Lincoln Navigator All Models, 2006-2008 Lincoln Mark LT All Models ( Attention Note: Will Not Fit 2004 Ford F150 Heritage Models, Will Not Fit 2010-2014 Ford F150 SVT Raptor Models, Cutting & Modifications May Require For Models Without Tow Hook )
• Front Bumper Bull Bar Guard & Universal Cree LED Light Bar ( Wires, Switch & Mounting Brackets Are Included )
• Bull Guard: Classic Series Skid Plate Bull Bar, Heavy Duty Steel With Black Color Powder Coating Plus Warranty Against Rust And Corrosion, 3" Diameter Tube & 1.35mm Thickness
• LED Light Bar: 20 PCS x 3W High Intensity LEDs Super Bright Offroad Style. Straight Light Bar With 1 Row Of LEDs. Beam Type: Spot Beam 30 Degree - Long Range Light. Dimension: Long: 20" / Height: 2" / Width: 3". Power: 100W. Operation Lumens Output: 7000LM. Waterproof Rate: IP 67. Color Temperature: 6500K. Operation Temperature: -40C to 75C
• Color: Black

Product description

> Hunter Grille Guards provide customized front end protection for the headlight and grill areas of the vehicle

> Each grill guard is designed specifically for its vehicle model, contouring to the lines of the front end while providing an easy, hassle free installation with no drilling required

> The 5-stage black powder coated tubes, measure 1.5" in diameter

> Each box includes all the necessary mounting hardware, 2 headlight guards, and a center piece

> For some vehicles the center piece may require assembly



THIS MODEL IS DESIGNED FOR VEHICLES LISTED BELOW



> 2006 - 2008 Ford F-150 (4X4)

> No need to cut out tow hook access holes on bumper

> Main bracket goes under bumper with MINOR trimming of air dam



NOTE:

Amazon fitment table may not display correctly. Title description 100% correct.

• (4X4) Only; Tow hooks need to be removed; Trimming of air dam required for models w/o tow hooks
• Durable Five-Stage black powder coated finish
• Removable headlight guards, All mounting bracket kit included
• No Drill installation
• Limited 5-year Warranty

User questions & answers

Question:	Will this clear my Curt front receiver hitch
Answer:	I would need to see a pic but I think it will.
Question:	I have a class 2wd but the gap in the bumper cause I replaced it. It’s 2wd 2007 will it still work
Answer:	If your truck has tow hooks that are mounted to the fram it should fit. You might have to modify the upper brackets a little but that's pretty easy.
Question:	what is the pulling force and pushing force this is rated for
Answer:	This isn't a load bearing bumper. This is just brush guard designed to block small branches from damaging your front end and lights. If you are looking for push force a bull bar is what I would recommend. This is mostly for style and light protection. Once again light brush and branches
Question:	Does it seem like this would take a deer strike and protect the vehicle a little more
Answer:	There are a lot of different things in play with a deer strike like the weight distribution and how it hits the truck. I do think that it is sturdy enough to take a great deal of the force away from the more fragile parts of the truck's front end. I've already used it once to push a tree out of the road and it looked completely untouched.

Product description

• 100% Brand New In Stock
• Custom Designed To Fit Your Specific Application
• Provide Front Bumper & Grille Protection / Brush Guarding For Off-Road Use
• Dramatically Improve Accessibility & Appearance Of Your Vehicle
• Include Installation Instruction
• Professional Installation Is Always Highly Recommended


* Technical Tips: Drive Over Curbs, Trees And Rocks Without Worries - The Heavy-Duty Rugged Frame Means Your Front End Is Covered Against Damage From A Lack Of Ground Clearance.

** Installation Notes: Our Bull Bars Are Designed For Easy Bolt-On Installation That doesn't Require Drilling

• Application: For 2004-2020 Ford F150 Models, 2003-2017 Ford Expedition All Models, 2003-2014 Lincoln Navigator All Models, 2006-2008 Lincoln Mark LT All Models ( Attention Note: Will Not Fit 2004 Ford F150 Heritage Models, Will Not Fit 2010-2014 Ford F150 SVT Raptor Models, Cutting & Modifications May Require For Models Without Tow Hook )
• Front Bumper Bull Bar Guard
• Studded Mesh Series Skid Plate Bull Bar, Aluminum Mesh, 3" Diameter Tube & 1.35mm Thickness
• Heavy Duty Steel With Flat Black Fine Shimmering Finish Plus Warranty on Craftsmanship Only
• Color: Matte ( Satin Black )

User questions & answers

Question:	License plate bracket
Answer:	No, it does not come with a bracket to attach the license plate.

Product description

Basic. Standard. Stock. Some words were never intended to describe your truck, and it takes a certain type of hardworking truck accessory to meet your expectations. The LUVERNE Prowler Max grille guard equips your truck to tackle the toughest of jobs with its uncommon construction, comprehensive protection and arsenal of extra features. It begins with a bold, punched steel screen center section. This heavy-gauge mesh not only adds style to the Prowler Max but also increases protection for your grille, shielding it from rocks, debris and other threats. The center section features our signature logo reveal with contoured horizontal tubes to add even more protection and increase structural stability. Below the center section is a built-in 4" wide step with non-skid, diamond treads. The step blends perfectly with the grille guard and provides easier access when working under the hood, particularly on large, full-size pickup trucks. The Prowler Max grille guard also distinguishes itself with its vehicle-specific wraparound ring assembly. The double-stacked side brush guards uniquely contour to the front end of each truck application and feature 3/8" wires for increased headlight protection. This particular custom truck grille guard fits specific years of the Ford F150 (see fitment info to verify). To give it the muscle to stand behind its attitude, we construct the Prowler Max from one-piece, 2" diameter tubular steel. Its heavy-duty uprights bolt directly to the frame of the truck, using high-strength steel brackets and a no-drill installation (NOTE: Brackets for attaching this grille guard are included but shipped separately). To finish things off, the Prowler Max truck grille guard is available in two finish options. The E-coat and black powder coat finish offers maximum durability, while the high-polish stainless steel provides a bright, no-rust shine.

• MAX PROTECTION. This grille guard features a punched steel center section, vehicle-specific headlight brush guards and a one-piece construction for dependable front end protection. It also features 2-inch diameter tubing welded into a solid design
• INTEGRATED STEP. This truck grill guard is equipped with an integrated 4-inch bottom step that provides a useful step up when working under the hood. This is particularly helpful for maintenance on larger, lifted pickup trucks
• LOGO REVEAL. To proudly show off your truck logo, this grille guard features uniquely contoured tubes that wrap the center logo for a signature accent. The tubes also help protect the truck grille
• CORROSION-RESISTANT. For reliable weather resistance over the road and down the trails, this truck brush guard is constructed from steel and covered in a dual finish of E-coat and tough black powder coat
• NO-DRILL INSTALL. This grille guard installs with no drilling needed and fits select model years of the Ford F150 (NOTE: Components ship separately)

Product features

LUVERNE Prowler Max Grille Guards

Whether you’re headed to the jobsite or the off-road trails, the Prowler Max offers comprehensive front-end protection. It features heavy-duty 2” tubing, a punched steel center section and a vehicle-specific design for each truck.

To make the Prowler Max grille guard even more effective for your hardworking truck, it features a built-in bottom step that provides convenient access under the hood, especially on larger, full-size pickups. The Prowler Max grill guard also comes in two durable finish options.

Full front-end protection

The maximum protection offered by the Prowler Max grille guard begins with its vehicle-specific wraparound assembly. Featuring a double-stacked brush guard design and heavy-duty vertical uprights, it adds front-end protection to the center grille, lower bumper area, headlights, as well as the sides of the bumper.

Punched steel center

The grille of your truck is highly protected with the Prowler Max grille guard against all manner of on-road and off-road debris. The center section is a shield of heavy-gauge punched steel that allows proper airflow for your engine, while keeping rocks, sticks and other threats out.

Diamond tread step

When it comes time to maintenance your full-size workhorse, the Prowler Max truck grille guard provides easy access under the hood. The center cross-member is a 4” wide, diamond-treaded step that not only offers a non-skid surface, but also blends in with the design of the grille guard to maintain a professional look.

Signature logo reveal

While the Prowler Max is available in two finish options, both feature the same high-strength one-piece construction. Each is built from welded 2” tubular steel. For additional strength and style, the Prowler Max grill guard features the LUVERNE signature logo reveal, showing off your vehicle’s badge with pride.

For function and style

To perfectly match the functionality and style of your truck and to give it that professional finishing touch, the Prowler Max truck brush guard is available in two different finish options.

High-polish stainless steel

The stainless steel truck grill guard option is a 201 stainless steel for enhanced rust resistance. It comes with a high-polish finish for a bright shine no matter where the road takes you.

Black powder-coated steel

As a high-strength option, this carbon steel grille guard receives a double finish of E-coat and black powder coat to help maintain solid rust, scratch and chip resistance.

Product description

• 100% Brand New In Stock
• Custom Designed To Fit Your Specific Application
• Provide Front Bumper & Grille Protection / Brush Guarding For Off-Road Use
• Dramatically Improve Accessibility & Appearance Of Your Vehicle
• Include Installation Instruction
• Professional Installation Is Always Highly Recommended


* Technical Tips: Drive Over Curbs, Trees And Rocks Without Worries - The Heavy-Duty Rugged Frame Means Your Front End Is Covered Against Damage From A Lack Of Ground Clearance.

** Installation Notes: Our Bull Bars Are Designed For Easy Bolt-On Installation That doesn?t Require Drilling

• Application: For 2004-2020 Ford F150 Models, 2003-2017 Ford Expedition All Models, 2003-2014 Lincoln Navigator All Models, 2006-2008 Lincoln Mark LT All Models ( Attention Note: Will Not Fit 2004 Ford F150 Heritage Models, Will Not Fit 2010-2014 Ford F150 SVT Raptor Models, Cutting & Modifications May Require For Models Without Tow Hook )
• Front Bumper Bull Bar Guard
• Classic Series Skid Plate Bull Bar, 3" Diameter Tube & 1.35mm Thickness
• Heavy Duty Steel With Black Color Powder Coating Plus Warranty on Craftsmanship Only
• Color: Black