13 best compressed air tanks

Product description

Fully assembled and ready to use 5-Gallon portable air carry tank. Unit has a high quality brass manifold and is equipped with an air pressure gauge, air line shut-off valve, pressure relief valve, easy access fill valve, 3-Feet by 1/4-Inch air hose and air chuck. With a durable, welded on carry handle this unit is perfect for emergency tire inflation, blow cleaning and recreational inflation.

• 135 Max PSI
• Fully assembled, ready to use
• High quality brass manifold
• Durable welded on handle
• Equipped with air pressure gauge, air line shut-off valve, pressure relief valve, easy access fill valve, 3-Feet by 1/4-Inch air hose and air chuck

User questions & answers

Question:	Can it add air to a class A motorhome
Answer:	What I did was, instead of pushing the straw into the cone attachment, I pushed the straw *out* of the cone attachment, then attached the merged units onto the duster. Hope that helps.
Question:	is this tank made in usa
Answer:	No, it is not ESD safe, but can be used if careful. The material is plastic which is an insulator that holds a charge. We are talking potentially thousands of volts! Keep the nozzles at least a few inches away from the motherboard or any electronics, spray from a distance, this is a powerful blower so it still works great. Never use the brushes on anything internal, only use them on case exterior, keyboard, etc.
Question:	can i use a black and decker max multi-purpose inflator to fill it up (or any other small portable compressors
Answer:	The amount of pressure is very close to canned air, just a bit less than a full can of air. There is no build up limit, the power reaches 100% upon flipping the "On" switch. There are 2 speeds.
Question:	Can the hose be removed and another one put on
Answer:	No idea

Product features

Ideal for Emergency Tire Inflation

The Pro-Force FT5 5-Gallon Portable Air Tank is a fully assembled and ready to use 5-Gallon portable air carry tank. This unit has a high quality brass manifold and is equipped with an air pressure gauge, an air line shut-off valve, pressure relief valve, easy access fill valve, 3 feet by ¼ inch air hose and air chuck to make inflating applications simple and easy. The Pro-Force FT5 5-Gallon Portable Air Tank comes with a durable and convenient welded on carry handle, making it easy to carry along.

Product description

A perfect tank for any paintball marker that operates on High Pressure Air. This Empire Paintball 48cu/3000 PSI tank is Made In The USA. Features: * Lightweight Aluminum DOT and TC certified cylinders "Made in the USA" * 3000 PSI fill capacity with an 800 PSI output pressure * User replaceable Bonnet

• Lightweight Aluminum DOT and TC certified cylinders "Made in the USA"
• 3000 PSI fill capacity with an 800 PSI output pressure
• User replaceable Bonnet

User questions & answers

Question:	Does the mad dog remote coil work with this because mine is not doing anything when I hook it up not even wen I press nipple on top
Answer:	What I did was, instead of pushing the straw into the cone attachment, I pushed the straw *out* of the cone attachment, then attached the merged units onto the duster. Hope that helps.
Question:	What connectors does this use? For refill and for output
Answer:	No, it is not ESD safe, but can be used if careful. The material is plastic which is an insulator that holds a charge. We are talking potentially thousands of volts! Keep the nozzles at least a few inches away from the motherboard or any electronics, spray from a distance, this is a powerful blower so it still works great. Never use the brushes on anything internal, only use them on case exterior, keyboard, etc.
Question:	Am I going to die if I put this on a mini gs
Answer:	The amount of pressure is very close to canned air, just a bit less than a full can of air. There is no build up limit, the power reaches 100% upon flipping the "On" switch. There are 2 speeds.
Question:	Does it use compressed air
Answer:	No you don’t need to remove the fans. They need to be blown out also. Just make sure you unplug the power before blowing it out.

Product description

The Craftsman 6 gallon air compressor features an oil-free pump for maintenance-free operation and a long life. It is lightweight and portable at 30lbs, and features a long runtime and quick recovery.

• 6 gallon pancake maximizes portability and stored air
• Durable, oil free pump for long life and no maintenance
• 150 max PSI to ensure adequate cut in pressure for a variety of applications
• 2.6 SCFM @ 90 PSI allows for quick compressor recovery time. Voltage - 120 volt
• Easily starts up in cold weather
• 13 piece accessory kit includes: 25' X 1/4inches Pvc air Hose with coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA safety nozzle, rubber tip, three inflator adaptors
• 1 year limited warranty, refer to "warranty & support" section below for full details

User questions & answers

Question:	Is this made by black and decker? what lind of gears does it have? are they vynil
Answer:	Three.but have adapter to use 2 holes.
Question:	Is this unit built in the U.S
Answer:	No it doesn’t come with it. You have to buy it separately. You can get it from Home Depot.
Question:	What is the noise rating on this? Is it louder than comparable brands
Answer:	Yes it connects to an air compressor.
Question:	How many amps? Need to know if it will trip my standard 15 outlets or if it needs to run on a 20 amp outlet
Answer:	I will use Amazon when I need them. Just purchased product so do not need one now.

Product description

This convenient air tank from Performance Tool provides a maximum psi of 125 to help in any on-site job or project in the shop. Light-weight and with a handle for easy transport, this portable air tank can go wherever you need it. The hi-viz color on this pressurized air tank offers added visibility.

• PRESSURE GAUGE: Displays air pressure in PSI and MPa; 125 maximum psi
• DURABLE AND PORTABLE CONSTRUCTION: Industrial grade air hose with standard tire air chuck; light weight and convenient handle for easy transportation
• EASY CONNECT: Connects to standard compressed air source
• SAFETY VALVE: Safety pressure bypass valve with manual override

User questions & answers

Question:	Can i remove the schraeder valve and thread in another npt valve, or is it pressed on
Answer:	Dear customer, Yes, it's safe to clean the vinyl albums. Please keep the vinyl albums in a stationary place to clean in case blowing it away. If you have any problem about the air duster, please contact us freely. Best regards, OPOLAR customer service,
Question:	What size NPT is the fitting
Answer:	Dear customer, Yes, the unit can work continuously for half an hour, after it's out of power, please charge it, usually it takes 3h to get on a full charge. If you have any problem using the unit, please contact [email protected]. Have a nice day. Sincerely. OPOLAR customer service.
Question:	Is there a port for a gauge and another for output? what is the thread of the other port/ports? Thanks
Answer:	Dear Customer, It is made in China. I hope it helps. Regards, OPOLAR Customer Service
Question:	Where's this tank made
Answer:	No you don’t need to remove the fans. They need to be blown out also. Just make sure you unplug the power before blowing it out.

Product features

Air Tank Repair Kit

Air shutoff valve: A knob that turns to prevent air from leaking out of the tank when it's not in use.

Air pressure gauge: Indicates the air pressure inside the tank as well as how full the tank is.

Flexible hose: The hose for delivering compressed air from the tank. Hoses may attach to the tank with a threaded fitting or a quick-connect fitting.

W10056 Air Tank Manifold

The tank end is 1/2" MNPT male. The gauge port is 1/8" FNPT. The outlet (hose) port is 1/4" FNPT female.

W10057 Air Hose

4 feet PVC air tank hose with both brass ends. The one end is equipped with a 1/4" (F) NPT tire chuck and the other end is 1/4 inch MNPT Thread.

W10055 Pressure Gauge

The pressure will be displayed in the 2-inch face gauge which has 2 units PSI and MPa (0 - 200 PSI, 0-1.4MPA).

Aluminum Knob

The red knob connected to this valve allows you to easily turn on/off the air flow to the air hose. And prevent air from leaking out of the tank when it's not in use. The material aluminum is much more durable than the plastic one knobs and will last a much longer time under normal use. You will find this Aluminum knob on the following part numbers W10011 11-Gallon Air Tank, W10005 5-Gallon Air Tank, W10056 Air Tank Manifold, and the W10058 3pc Air Tank Repair Kit.

Product description

Get use out of your heavy-duty tools and powerful equipment outside of the workshop. Stock up on air with Rolair AIRKEG2 Heavy-Duty 10 Gallon Portable Steel Auxiliary Air Storage Tank. With the intention to prevent your air compressor from short-cycling and cutting out, the steel air tank is an invaluable assistant on any high-volume job. This auxiliary tank holds up to 10 gallons of portable air operating at 225 psi to do the hard work for you. Featuring 4 3/8-inch outlet ports, the secondary air supply powers multiple tools simultaneously, produces more consistent airflow, minimizes frictional loss over distance, and results in fewer stairstepped nails. Intelligent functions include upward-facing gauge, 90 degree check valve inlet that allows 1 direction for air flow, and safety relief valve that shut off the tank to prevent upset build-up. Simplify labor efforts with Rolair 10 Gallon Portable Auxiliary Air Storage Tank.

• ADD AIR STORAGE: Increases current compressed air storage with 10 gallon storage capacity
• PORTABLE AIR SUPPLY: Offers portable air supply with lightweight design and ergonomic carry handle
• EASY TO READ GAUGE: Upward-facing gauge makes reading the gauge easy and convenient
• INTELLIGENT FEATURES: Includes 90 degree check valve inlet that allows air flow in only 1 direction, ball valve drain, and safety relief valve that shut off tank to prevent upset build-up
• USE MULTIPLE TOOLS AT ONCE: Features 4 3/8-inch NPT ports that connect to your compressor

User questions & answers

Question:	Does this include a regulator if not where can i buy one
Answer:	Yes
Question:	Do you plug your air compressor on the side of it and run your tools from the tank
Answer:	I use a Dewalt pancake compressor. Whatever the max is for your compressor, will get this tank to that pressure.
Question:	It come with air hose
Answer:	Yes I put a female coupler in its place.
Question:	What are the dimensions of the tank
Answer:	Dear customer, Thank you for your question, I'm more than happy to assist you, For your question, yes, the nozzle pipe is dedicated and integrated in the unit. Other pipes would be unfitted, if you have any issue, please contact support@opolar,com with your problem and order ID, they'll assist you and repond you asap. Looking forward to your fast reply, Have a nice day. Kind regards, OPOLAR customer service.

Product description

Torin Big Red 11 gallon portable air tank holds compressed air for months. Great for inflating car tires, bike tires, sporting, air mattresses and recreational equipment. Stores out of the way in your car, truck, SUV, garage or home. Portable air supply where and when you need it. Easy to read pressure gauge and a 50" high pressure air hose with ball chuck. Built-in pressure release valve for safety.

• 11 gallon portable gas air tank
• 50" high pressure air hose with ball chuck
• Easy to read pressure gauge
• Built-in pressure release valve for safety
• Holds compressed air for months
• Easy to read pressure gauge
• Built-in pressure release valve for safety

User questions & answers

Question:	Can a regulator be attached? I need about 5 psi but long lasting (11 gallon tank). Is it a 1/4" size
Answer:	For refills, there is a side nipple to fill it from a scuba tank or powerful air compressor, and on the top, there is the air output for a universal air hose.
Question:	Can you put nitrogen for tire inflation in this unit or can you recommend one that will
Answer:	One day you will but probably not from the mini gs
Question:	Can i hook this up to my current air compressor and increase its current capacity
Answer:	Yes, but you need a HPA compressor to fill it.
Question:	How much pressure will this tank safely hold
Answer:	It will safely hold about 100 psi. Not sure what your motorhome tires need. It might be enough to top off one tire but would not fill a flat.

Product description

- Standard 800 psi output pressure - Five year retest cycle - DOT and TC approved cylinder - Made in the USA - Tank must be filled prior to use

• Aluminum High Pressure Air system
• 48 cubic inch cylinder, 3000 psi
• Proven regulator providing stability and consistency
• Nickel plated bonnet for increased durability
• Aircraft grade aluminum regulator

User questions & answers

Question:	What year is the DOT stamp
Answer:	1/2 inmch
Question:	What year is the DOT stamp
Answer:	Yes. There should have been better photos, including the opposite side. The product description should have included the details you asked for. The current product description is incorrect - there is no gauge or hose included, just what you see in the photo. Look up the JEGS Performance Products W10056 manifold - it's the same part, but with more accurate description and 4 photos. The gauge port is threaded 1/8 NPT, and the output is 1/4 NPT. These are common sizes for a mini gauge and standard air fittings and/or hose ends.
Question:	How long do they last for? Some say only 5 years and nobody will fill it
Answer:	Made in China. And actually only has a two year destroy date stamped on the tank itself.
Question:	I bought a 2 pack of Tippmann 48ci high pressure aluminum cylinder tanks new. But they came empty. Are they supposed to come filled or empty
Answer:	Remember all tanks are shipped empty and would need to be filled before use but all remote lines should work with this style tank.

Product description

Refillable 48/3000 HK Army aluminum paintball tanks are a great alternative to carbon fiber systems. Industry Standard High Pressure compressed air regulator set to the standard output pressure of 800psi. The HK Army 48ci 3000psi HPA tank gives the look and performance of a high-end tank without the price tag. Regulators are individually hand assembled and tested on state of the art machines for outstanding quality and assurance.

Features:

* Durable Aluminum Tank Bottle

* Black HK Army 48ci / 3000psi HPA Compressed Air Tank

* Output Pressure 800psi

* Fill Level Gauge

* Includes rubber nipple cover for added protection/storage

* Compact pressure gauge

* Tri-Label UN ISO Certification - Universal Acceptance

* Dual Burst Discs for added Safety

* 5 Year Hydro stamp

* Flat bottom for storage upright or on tables

* Tank measures 3.5 inches diameter x 10 3/4 inches tall

• Black HK Army 48ci / 3000psi HPA Compressed Air Tank
• Durable Aluminum Tank Bottle
• 800 psi Output Pressure
• 5 Year Hydro stamp
• Flat bottom for storage upright or on tables

User questions & answers

Question:	Does anyone use this for hpa airsoft setups? hopefully polar star rifle
Answer:	It’s used to add storage to your smaller air compressor. Gives you a longer shot when using impact wrenches and items. You can get closer to work with a feeder line and have a reservoir near your work. I use one for a 1” impact gun on semis
Question:	Does this fit an tippmann a
Answer:	No. This comes with safety release valve and a 90 degree joint as per the picture, and a valve stem for draining water on the bottom. all other holes are user supplied plugs/connectors/etc...
Question:	What is the hydro test date
Answer:	https://www.rolair.com/products/accessories/airkeg2 DIMENSIONS 23" x 16" x 12"
Question:	can i use this to refill my pcp airgun
Answer:	The valve end is one piece crimped on... thanks

Product description

This Industrial Air ASME Certified 175 PSI air tank is fully assembled and ready to use. The carry tank is multi-functional and can be used vertically or horizontally (complete with ring base for a vertical air storage tank, four feet with solid vibration isolators on each). it comes with two Welded on carry handles and a quarter turn tank drain valve.

• 2-in-1 multi-function 175 PSI ASME certified air tank
• Fully assembled and ready to use
• Can be used in either a horizontal or vertical orientation
• Works as a horizontal or vertical auxiliary air storage tank with a compressor or as a portable air carry tank
• Two air access assemblies, an auxiliary air storage tank to use with your compressor, or a portable carry tank when you are on the go

User questions & answers

Question:	Can it be wall mounted? what is the distance between the foot pegs
Answer:	Absolutely. Nitrogen is an inert gas and not dangerous at all.
Question:	Can i pipe a compressor directly into this tank? In other words can this replace an old rusted tank
Answer:	Yes you can. I had to at a tee in order to put a valve fitting and a quick connect fitting on. On the valve I have the inlet connected to my compressor. I use the quick connect as my outlet to my air tool. Works great at hold pressure for months at 120psi.
Question:	does this have a regulator on it
Answer:	Label says maximum working pressure is 125 psi.
Question:	What is shipping cost for this tank
Answer:	No regulator but comes with a tank gauge

Product features

Industrial Air 20 Gallon Air Receiver Tank

Features and Benefits:

Multi-Functional

Use an air hose from your air compressor to connect to this line and easily fill the tank. You now have an auxiliary air storage tank to use with your compressor.

Use an air hose to connect to the quick coupler end and you now have a portable carry tank. Attach a tire chuck, a tire inflator, a blow gun, etc. to the opposite end of your air hose and you are ready to use your portable air.

Easy Operation

The unit comes fully assembled and ready to use.

Quarter turn tank drain valve allows for quick and thorough tank draining.

Maximum Portability

Two welded on carry handles offer easy transportation to various job sites.

The ring base allows for convenient storage.

Product description

California Air Tools AUX05 - 5 Gallon Steel Auxiliary Air Tank is designed for portability and easy to use. The lightweight and easy carry designs make transporting this air tank very easy. California Air Tools auxiliary air tanks are designed to provide an extra supply of air needed for short-term demands such as inflating tires. These auxiliary air tanks provide stable pressure and a constant air flow for purposes such as spray painting. Having the California Air Tools auxiliary air tanks will allow you to have an extra supply of air for more time before the air compressor motor/pump starts to run. The Easy to Use Quick Connect Fittings on the Air Hose and Air Valve allows you to quickly attach the Air Hose to an air compressor and fill the auxiliary air tank without needing extra air fittings. This Easy to Use Quick Connect System also allows you to connect a standard air hose to your air valve for use with air tools. More Air, Less Noise and Easy to Use, California Air Tools Auxiliary Air Tanks! L - 20.8'    H - 12.2"    W - 8.6" Wt. - 17 lbs.

• 5 Gallon Steel Air Tank
• Easy to use Quick Connect System
• Lightweight & Portable
• Hose and Air/Tire Chuck Included

User questions & answers

Question:	Steel or Aluminium which is better
Answer:	2019/10
Question:	What is the max psi on the *steel* tank
Answer:	You are correct the metal breaks down over the years
Question:	does this tank have a valve to let moisture out of the tank
Answer:	They are empty , you have to get them filled. OSHA rubles are such that they can’t come filled. We ended up taking them to a scuba shop and they filled them for a decent price.
Question:	What is max pressure? 100psi? 150psi
Answer:	The tank fitting appears to be 1/2" female thread.

Product description

Empire Basic Air Systems offer an affordable option to the player who wants to upgrade to a High Pressure Air system. These high quality air systems feature an aluminum regulator that provides steady performance and reliability. With a five-year retest cycle, these Empire Basic tanks will operate for many years of quality performance. Features: * Proven regulator performance using Pure Energy Technology * 68 Cubic inches at 4500 psi * Standard 800 psi output pressure * DOT approved cylinder * Limited 90 day warranty * Aircraft grade aluminum construction regulator * Fully serviceable regulator design * Five year retest cycle

• Lightweight DOT & TC certified carbon fiber cylinders Made in the USA
• Utilizing Pure Energy technology regulators that lead the industry in flow, stable pressure output and efficiency
• Both high and low pressure rupture disks installed for the highest level of safety
• All components meet or exceed all ASTM, DOT, TC or CGA standards or requirements
• Five year retest cycle

User questions & answers

Question:	What is the material or the tank
Answer:	Yes
Question:	Can these be filled with air from any air compressor, or do they have to be filled at a store
Answer:	The date is when your tank is due to be hydro tested for leaks an any defective parts
Question:	Can this be fitted to fill a pcp rifle
Answer:	No the output isn’t high enough for a PCP gun
Question:	Can this go on any gun
Answer:	2020

• Capacity: 5 Gallon (18 Liter)
• Pressure Rating: 200 PSI
• Ports: 6 x ¼ inch NPT, 2 x ½ inch NPT
• 240 PSI Air Pressure Gauge
• 170-200 PSI Pressure Switch

User questions & answers

Question:	Is this a dot rated tank? does it have a stamp or badge on it saying so
Answer:	Yes. You can attach an air line directly to the tank, by shopping for the size fittings and pipe supply that it will require, at a hardware store. However, if you want to mount the pump itself directly to the tank, you will need to weld two platforms onto the tank, to hold the pump and the electric motor. The tank can be pumped up to 175lbs of pressure.
Question:	Hi, odd question i know but can i use this tank to temporarily/momentarily store saturated steam at about 260 degrees f at a max of 20 psig
Answer:	Derick,It does not have a regulator.
Question:	can this be used as a slave tank for my pancake compressor I need more air capacity
Answer:	zero, if you are willing to wait through Amazon
Question:	What are the limitations of this tank? can i use pnumatic tools for auto work? auto painting? tire inflation? what are things i can't do? thanks
Answer:	Yes.... Works with any regulator besides SLP.

Product features

8 Ports

Tank has one 1/4" NPT port and one 1/2" NPT port in the front, one 1/4" NPT port on the left side, three 1/4" NPT ports, one 1/2" NPT port on the right side and one 1/4" NPT port at the bottom.

Pressure Switch

Preset to turn on the compressor when air tank's pressure is below 170 PSI, and turn off the compressor when the air tank pressure reach 200 PSI.

Pressure Gauge

Compact single needle 240 PSI air gauge with black color bezel, the perfect solution to accurately read pressure in the air tank.

Accessory Pack

• 250 PSI Safety Valve
• 1/4" NPT Wing Style Drain Valve
• 1/4" NPT Compression Fitting for 1/4" OD Air Line
• 1/4" NPT Hex Head Male Plug
• 1/2" NPT Hex Head Male Plug
• 1/4" OD Nylon Plastic Hose (6 Feet)
• Thread Sealant Tape
• Mounting Hardware

• Capacity: 4 Gallon (15 Liter)
• Pressure Rating: 200 PSI
• Ports: 4 x 3/8" NPT, 3 x ¼" NPT
• Anti-Corrosion Black Matte Powder Coating
• Mounting Hardware Included

User questions & answers

Question:	dose this tank include plugs for the holes
Answer:	No this tank does not have a valve to let out moisture.
Question:	Location of the 1/4 port
Answer:	125 is red line on gauge, and the blow-off is 140 PSI. Most things have at least an engineering safety factor of 2X.
Question:	Is the logo on the tank permanently
Answer:	You can but the drain plug won't work

Product features

7 Ports

Tank has two 3/8" NPT ports in the front, one 3/8" NPT port, two 1/4" NPT ports on the left side, one 3/8" NPT port on the right side and one 1/4" NPT port at the bottom.

Large Diameter Ports

Featuring large diameter ports which prevent the bottle necking that you may find on air tanks with smaller ports.

Mounting Hardware

Screws, washers and nuts are included with the tank.