10 best plastic bonder

Product description

Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

• J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces. J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more! J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!
• CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure. J-B Weld PlasticBonder set and cure color is tan
• STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI.
• SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Work on battery
Answer:	Might work on the plastic case - but I would not use in contact with battery acid
Question:	Can this be used to fix a small crack in a dashboard
Answer:	Yes! I used it to repair the vacuum
Question:	Will this work on hdpe
Answer:	I used this on a PVC job and it worked well for that, but I mixed it on a plastic lid that was HDPE (#2 recyclable) before applying it. There was some left on the lid, and after it dried, it pealed right off the lid, so I'm not too sure about using this on HDPE.
Question:	I want to bond glass to polypropylene. Does this work? If not any good epoxy that works for this
Answer:	I did not know if the plastic bonder would stick to glass, so I tried it on some empty glass jars and old prescription pill bottles which were made of Polypropylene, (type 5 plastic). I cleaned and sanded both the plastic bottles and the glass jars. I applied the JB Weld Plastic Bonder to one sample and also tried PC-11 Marine Power Epoxy Paste on another, (the jars and bottles were put together bottom to bottom). After they had cured I tried to pull them apart. Both the Plastic Bonder and the Epoxy Paste held with light pulls and twists. Both came apart with a medium/heavy pull. Both the Plastic Bonder and the Epoxy Paste stuck tenaciously to the glass jar, and came off cleanly from the plastic bottle. So it does stick to glass rather well, while holding, but not bonding to the Polypropylene bottle. I would try some on your particular application, (a sample), and see if the medium holding power to the Polypropylene will work for you. The Plastic Bonder was much easier to mix and apply than the Epoxy Paste. The Plastic Bonder cured in about two hours while it took 24 hours for the Epoxy Paste to cure. Both had about the same results as far as the holding power, but the Plastic Bonder when mixed is like a gel, while the Epoxy is a much thicker paste, which means you could use it to fill gaps and holes. It was easy to file/sand the Plastic Bonder after it had cured, the Epoxy Paste could be worked after it had cured, but it was much harder to do so.

Product features

Quick Setting Adhesive

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets to a tan color and cures to a hard, permanent bond.

Additional Benefits

All J-B Weld Syringes have a unique dispensing system allowing customers to re-seal the product, which prevents air from curing the epoxy or adhesive, so they can use it multiple times. J-B Weld also provides a mixing tray and stick in the package so you can get to work right away!

Product description

1363118 Features: -Bonder. -Bonds nylon, polycarbonate, Mylar, PVC, acrylic, ABS, stainless steel and many other plastics. -Resistant to solvents, gasoline, diesel fuel and motor oil. -Extremely resistant to high humidity, moisture and impact. Product Type: -Plastic Adhesives. Dimensions: Overall Height - Top to Bottom: -3.88 Inches. Overall Width - Side to Side: -8 Inches. Overall Depth - Front to Back: -1.5 Inches. Overall Product Weight: -0.2 Pounds.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Epoxy Plastic Bonder is an acrylic formula that is specially formulated to bond and repair plastic surfaces. The convenient double syringe dispenses equal amounts of each component every time. When mixed in equal volumes, the components react to produce a tough, rigid, high strength bond in 20 to 25 minutes. This 2-part acrylic is formulated to give structural strength to plastic projects and repairs, making it great for hard-to-bond plastics. Loctite Epoxy Plastic Bonder does not shrink and is resistant to water, most common solvents and shop fluids. It has high impact resistance and can be sanded and drilled. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results". This item in non-returnable

• Bonder
• Bonds nylon, polycarbonate, Mylar, PVC, Acrylic, ABS, stainless steel and many other plastics
• Resistant to solvents, gasoline, diesel fuel and motor Oil
• Extremely resistant to high humidity, moisture and impact
• 0.85 oz

User questions & answers

Question:	Will this work on a small engine plastic gas tank
Answer:	Actually, the Data Sheet from Loctite states: Chemical and Solvent Resistance: Resistant to water, salt water, unleaded gasoline, diesel fuel and motor oilhttp://www.loctiteproducts.com/tds/EPXY_PLSTC_S_tds.pdfI'd be certain to follow all of the preparation instructions listed in that document though... cleaning, roughing-up. etc.
Question:	Depicted on the package is a white polypropylene lawn chair. Will this product do a repair of that item
Answer:	I haven't found many plastics to which it will bond, so I'd say no...it would not work. Especially something you expect to hold a person off the ground.
Question:	Will this bond hdpe to hdpe
Answer:	I disagree. HDPE is a slick nylon-like plastic and this stuff fails miserably on any of those compounds.
Question:	What color is it when it dries? Clear
Answer:	Hello, I would say it's more grey but one the clear side though. I am not sure if the percentages of the mix makes a difference. I mixed it 50/50. Hops this helps.

Product description

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml (Pack of 2)

• Plastic Bonder is a quick-setting, two-part, urethane adhesive system
• Provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more
• Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes
• With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond
• Use on automotive, brick, ceramic, concrete, epoxy & adhesives, fiberglass, plastic/composite/PVC, wood and more

User questions & answers

Question:	Will in work on ldpe tank crack
Answer:	Don't recommend it. Polyethylene's are difficult to adhesive bond. Would think thermal welding would be a better choice.
Question:	Will this work on kayak cracks
Answer:	Possibly. I'm assuming your kayak is molded ABS (Acrylo-Nitrile-Styrene - Royalite, etc.) Clean well with 91% Isopropyl (Rubbing) alcohol and abrade with sandpaper where accessible before bonding. If it's Kevlar, carbon fiber or fiberglass-reinforced epoxy, polyester or other thermoset resin, there are probably better choices to avoid compromising the structure.
Question:	Will this bond hdpe to pvc
Answer:	Haven't tested it, but suspect not too good. Polyethylene and High Density Polyethylene are both almost as bad as Teflon for bondability. PVC is fine. If you have to do it, rough up the HDPE bind area as much as possible and use 93% isopropyl alcohol to make surfaces grease- free. I believe J-B-Weld Plastic Bonder is a urethane resin (Not Crappy like Gorilla Glue) that I've found works well fur most materials. - pab
Question:	Anyone use this on a urethane bumper cover? I have a small hole in an urethane front air dam that I want to fill and repaint. Thanks
Answer:	It may work i used it to repair cracks on a plastic golf cart body but you do need to prime it a couple times and resand for it to look good.

Product description

J-B Weld Plastic Bonder High Strength Automotive Adhesive Paste 0.85 oz. PLASTIC BONDER .85OZ PlasticBonderis a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonderhas a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBondersets black in color and cures to a hard, permanent bond.

• 2 pack - 85 oz.
• UV Resistant: Yes
• Dries Clear: No
• Curing Time: 30 min
• No waste, no mess cap Works on thermoset and carbon fiber composites, thermoplastics, coated metals, concrete and more

User questions & answers

Question:	whats the working time
Answer:	You have about 5 mins to apply before it cures too much to apply - so get everything ready before you mix the epoxy
Question:	could i use this to make a bond on aluminium alloy to hard polymer like nylon 60 for a 2 in square area without much force
Answer:	Yes.. just make sure you allow it to dry
Question:	Can it be used for plastic to wood
Answer:	I tried a similar product, wood expends and contracts with the weather, I ended up replacing the wood. Live and learn right! Good luck on your project. Moe
Question:	Is it at all flexible after curing? Wanting to use on a bumper cover
Answer:	It dries hard.

Product description

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml Pack Of 3

Product description

J-B Weld ExtremeHeat is formulated to allow for repairs to iron, steel and metal in high temperature environments (2400F / 1300C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs).

• PLASTICBONDER is a quick-set, 2 part, urethane adhesive system that provides strong, lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete and more.
• THE ORIGINAL COLD WELD JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel.
• SIMPLE TO USE J-B PlasticBonder has a 1-1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder cures to a hard, permanent bond.
• VERSATILE AND DEPENDABLE Perfect for indoor or outdoor use, epoxy and adhesives, plastic, composite, PVC, and more. Plastic Bonder makes a great gap filler and dries black in color.
• DO IT YOURSELF Big or small, you can DIY it with J-B. Our heavy duty adhesives repair and restore it right the first time. JB Weld delivers the legendary performance of the Worlds Strongest Bond.

User questions & answers

Question:	Is this designed for low energy plastic such as polypropylene
Answer:	Could’t tell you. I used it to bond two pieces of solid, cast epoxy resin together because they were basically made of the same components. It’s pretty strong so it might melt polypropylene.
Question:	will this work polypropylene
Answer:	It may work, but the Henkel spec sheet doesn't list it. If you try the Loctite Plastic Bonding System (Amazon 681925) it specifically calls out polypropylene.

Product description

681925 Features: -Repairs any plastic guaranteed. -Quick, neat and easy. -No mixing required. -2 grams. Product Type: -Plastic Adhesives. Dimensions: Overall Height - Top to Bottom: -3.81 Inches. Overall Width - Side to Side: -8 Inches. Overall Depth - Front to Back: -0.88 Inches. Overall Product Weight: -0.05 Pounds.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. The Loctite Plastics Bonding System is a two-part cyanoacrylate adhesive that sets in seconds and develops tremendous strength with just one drop. The activator primes hard-to-bond surfaces such as polypropylene and polyethylene. Loctite Super Glue Plastics Bonding System dries clear and sets without clamping. It is resistant to water, most chemicals and freezing temperatures. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Repairs any plastic guaranteed
• Quick, neat and easy
• No mixing required
• 2 grams
• Carded
• Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
• Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglas, polycarbonate, polystyrene and PVC

User questions & answers

Question:	Will this make a strong bond glueing polyethylene and/or polypropylene to itself
Answer:	I have used this to glue Teflon to itself, I think PE or PP shouldn't be a problem.
Question:	does this bond clear PET plastic
Answer:	Loctite's website says its designed for polyethylene plastics so I would give it a try. Other glues that seem to bond anything to anything are the various GOOP glues and E6000, which I prefer because it isn't so thick. GOOP and E6000 are basically the same type of glue (synthetic rubber based) with the latter being a little easier to work with, especially for small components. Both are made by the same company. But I would try the Loctite glue -- it makes a really strong bond. Be sure to follow the instructions EXACTLY and make sure you put a substantial amount of the activator (contained in the pen component) onto both surfaces and wait 20 seconds to dry before applying the glue component to one of the surfaces and putting the parts together. Hold the two parts together for at least 30 seconds to set/cure.
Question:	Anyone know what the activator is? Can I use the activator with other glues
Answer:	I'm still searching myself--perhaps this will help someone: IF n-Heptane works as an activator to bond plastics, you can buy a pint can of (apparently 100% pure) nHeptane on Amazon for under $14: "BESTINE Solvent and Thinner for Rubber Cement...16 Ounce Can". Amazon's link: https://www.amazon.com/BESTINE-Solvent-Thinner-Rubber-Cement/dp/B004O7HM38/ref=sr_1_1?ie=UTF8&qid=1534190132&sr=8-1&keywords=heptane&dpID=51xQHaC%252BC6L&preST=_SY300_QL70_&dpSrc=srch I would very much like to know if this would work as an activator to bond polyethylene to polypropylene using a glue (such as a super glue, and perhaps others)?
Question:	What is the real difference between loctite epoxy plastic bonder and loctite super glue plastics bonding system with activator
Answer:	The difference is in what you want to bond. Epoxy is a 2 part glue that is mixed in equal parts, it will bond plastics such as ABS, PVC, nylon, and Acrylic which are "NON" waxy plastics. The loctite super glue plastics bonding system is a Cyanoacrylates type glue and can be use on plastics such as polypropylene , HDPE, PE, etc which are a "Waxy" type of plastics.

Product features

Plastic is Hard to Glue

The key to success is our 2 part system with activator to prime the surface prior to gluing plastic together. Works on all plastics including hard-to-bond polyethylene and polypropylene.

Multipurpose Use

Bonds plastics such as Plexiglas, polycarbonate, polystyrene, PVC, polyethylene, polypropylene and polytetrafluoroethylene (PTFE)/Teflon. Plus rubber, leather, cork, paper, cardboard, wood, chipboard, fabric, metal and ceramic.

Simple 2 part system

Priming activator with slanted felt tip prepares plastic surfaces for permanent bonding. One minute after applying activator, use super glue sparingly on one surface, press together and hold for 30 seconds; it develops tremendous strength with just one drop.

Product description

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets black in color and cures to a hard, permanent bond.

• J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses
• CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black
• STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
• SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

Product description

JB Weld 50133 Plastic Bonder 15 Minute Epoxy USA Sand 30 min Green Free Ship supply:july1503

• JB Weld 50133 Plastic Bonder 15 Minute Epoxy USA Sand 30 min Green Free Ship supply:july1503 ************have problems, please tell us the name of this product, we quickly resolve

Product description

J-B Weld Plastic Weld Epoxy Putty Plastic Weld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Plastic Weld has a 20-25 minute work life; functional cure occurs in 2-3 hours. Plastic Weld cures to an off-white color, is rated at a tensile strength of 350 PSI. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first. Use on: AutomotiveCeramicFiberglassPlastic/Composite/PVCAnd more Instructions 1. Cut: Remove required amount of putty. 2. Mix: Thoroughly knead putty with fingers to a uniform color. 3. Apply: Press putty firmly to the surface to be repaired. J-B Weld is proudly made in the USA

• J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces. J-B Weld PlasticWeld is designed for DIY plastic repairs on ABS, PVC & CPVC pipes and plastics, auto bumpers and more! PlasticWeld is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours. J-B Weld PlasticWeld set and cure color is off white.
• PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI. PlasticWeld can withstand continuous temperatures up to 250oF (121oC) and intermittent temperatures up to 300oF (148oC) when fully cured. PlasticWeld does not shrink and can be molded, shaped, sanded, drilled and cut.
• APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
• Bonds instantly

User questions & answers

Question:	Will this product repair broken plastic boat windshield inviisibly
Answer:	will this product repair a broken plastic door handle
Question:	Can it be used more than once, or is thrown away after one use
Answer:	Comes with a resealable cap, I opened mine at least two weeks ago and have still been able to use it (also used on multiple projects during those weeks). Just be careful to replace the cap in the same holes you removed it from or you will mix the two components and seal the lid.
Question:	Will it seal a PVC pipe that has a 1 inch slit? Must hold 75lbs of water press. Would put a rubber patch & 2 pipe clamps over it
Answer:	Yes, it is awesome! I've used it for years! It should work great!!
Question:	Is this product good for the broken plastic frame of eyeglasses? The eyeglasses is broken on the temple leg
Answer:	As an optician for over 30 years, sadly, nothing I've found short of a 2 part epoxy/resin will work...but only .temporarily. plus you'll probably get it everywhere including the lenses. I suggest visiting your local optician. I have tons of discontinued frames and can usually hand-edge the lenses if its a close fit . BTW, its the same with so-called scratch removers for eyeglass lenses:snake oil. hope this helps... John shameless plug follows: glassescontacts.com or FB.

Product features

Epoxy Putty

PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. *After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life; functional cure occurs in 2-3 hours. PlasticWeld cures to an off-white color, is rated at a lap shear strength of 600 PSI. Does not adhere to polyethylene, polypropylene, or some other plastics.

Additional Attributes

• PlasticWeld NSF Certified - Safe for contact with potable water.
• PlasticWeld can resist continuous temperatures of 250°F (121°C) and intermittent temperatures of 300°F (149°C).