9 best airbrush prices

Product description

Features:

1. Made of brand new and high quality, durable to use.

2. Dual-action gravity feed airbrush for fine art, nail art, temporary tattoo, cake decorating, hobbies, etc.

3. Color media: watercolor pigments, inks and dyes, acrylic, automotive urethanes, lacquers, enamels (Not Included).

4. 0.3mm needle nozzle, broad spray, double action trigger for easy and accurate spray.

5. Easy fluid refills and easy cleaning.



Specification:

Condition:100% Brand New

Material: metal 

Cup Capacity: 7ml(cc)

Nozzle: 0.3mm

Feed Type: Gravity

Pressure: 15-60PSI

Type: Red,Gold(Opitonal)

Weight: Approx.93g/3.3oz





Package list: 

1 x Airbrush

1 x Dropper

1 x Nozzle Small Wrench

1 x Intake Connector





Note:

1. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

• ❤【Airbrush Gun】--- Made of brand new and high quality, durable to use
• ❤【Master Airbrush】--- Dual-action gravity feed airbrush for fine art, nail art, temporary tattoo, cake decorating, hobbies, etc
• ❤【 Airbrush Makeup Kit】--- Color media: watercolor pigments, inks and dyes, acrylic, automotive urethanes, lacquers, enamels (Not Included)
• ❤【Airbrush Set】--- 0.3mm needle nozzle, broad spray, double action trigger for easy and accurate spray
• ❤【Air Brush Painting Kits】--- Easy fluid refills and easy cleaning

Product description

Createx illustration colors are a premium airbrush paint which meets the performance requirements of the most demanding artists. Creates illustration colors offer the best in tight, detailed spray performance without compromise. Colors atomize finely at low PSI settings sprayed through small tip-sizes without tip-dry. Colors can be faded seamlessly from full saturation to a light tint without a grainy over-spray. Createx illustration colors are made with lightfast pigments and a very durable resin making them suitable for automotive airbrushing, fine art and everything else. Createx illustration colors cure to a very durable coating yet made be soft-erased during drying allowing for reductive techniques.

• Transparent Colors with a High Pigment Load suitable for use direct-from-the-bottle or with generous over-reduction
• Reduce with 4012 High Performance Reducer
• Compatible with any top-coat type including automotive urethane clears
• Water-Based & Non-Toxic
• Made in U.S.A

User questions & answers

Question:	Can this product be used on tshirts
Answer:	Not recommended for this, wicked or the original createx is best for t-shirt and clothing.
Question:	Can other brands of acrylic paints be mixed with this or just createx paints
Answer:	You can certainly mix with other brands of acrylic paint, but depending on the viscosity, pigmentation, lightfastness, etc. of the other brand, your results may not be consistent or indicative of the Createx quality...

Product description

Flawless, water-based airbrush makeup in 0.50 oz size. For all skin types. Our Matte series will give you an amazing healthy glow and is preferred for normal to oily skin. Water based, oil free, alcohol free, with vitamin E and minerals. Long wearing over 12 hours. If you enjoy a shine-free matte look, as if you've just applied a fresh layer of powder, then you'll love this coverage! Flawless satin airbrush foundation in 0.50 oz size. For normal to dry skin. Our Satin series will give you an amazing healthy glow. Water based, oil free, alcohol free, with vitamin E and minerals. Long wearing over 12 hours. If you enjoy a fresh, dewy look, as if you've just left the spa, then you'll love this coverage! We also have a beautiful array of eye shadows, blushes, shimmers, and bronzers! Choose from our extensive color pallet. Whether you're going for a soft and sensual look or a bold and sultry look, we have the color for you! Our blush also works great as a long wearing lip color...simply add your own lip gloss to complete this look! Check it out now!

• One (0.50 fl.oz.) bottle of Glam Air airbrush Clear Shimmer eye shadow (E15)
• Clear Shimmer can be used over any and every color we have to add that extra shimmer and shine!
• May also be used on entire face, neck, and body!
• For added sparkle and glam!

User questions & answers

Question:	How am i supposed to apply it - ?the tiny drops the tiny bottle dispenses. Don' seem to ldo it
Answer:	The makeup is applied with an airbrush machine. Put several drops into the cup on the airbrush, turn the machine on, pull the trigger on the airbrush back (not too far), and move the airbrush in circular motion spraying the makeup onto you face.
Question:	what are the ingredients? THank you
Answer:	h Makeup?1. Water - Carrier 2. Aloe Barbadensis Leaf Juice - Potent moisturizer, regenerating & healing agent, anti-inflammatory effects, and anti-aging effects (increases collagen synthesis & skin elasticity). 3. Glyceryl Stearate (and) PEG-100 Stearate - Emulsifier helps build a stable emulsion with great skin feel. 4. Dimethicone - Skin barrier (protect the skin), improves skin feel. 5. Propylene Glycol - Effective humectant & wetting agent preventing water loss in products & in the skin, increases skin permeability of active ingredients as it penetrates into the outermost skin layers, emollient & lubricant properties, excellent solubilizer. 6. Glycerin - Effective Humectants & Moisturizer attracting water to the intercellular space of the skin protects the lipids of the skin cells. Makes skin more supple and soft. (which helps with skins elasticity), also helps promote skin regeneration. 7. Phenoxyethanol - Preservatives 8. Methylisothiazolinone - Preservatives 9. Nelumbo Nucifera (Lotus) Floral Wax - Moisturizing, contains phospholipids, water resistant. 10. Xanthan Gum - Adds viscosity 11. Hyaluronic Acid - Most powerful moisturizer & humectant known so far, provides smoothness & softening to the skin, excellent anti-wrinkle effects, promotes growth of new skin cells after peelings, and supports wound healing. 12. Carbomer - Thickener useful for formulating and stabilizing emulsions. 13. Triethanolamine - pH adjuster stabilizes emulsions.
Question:	Is this brand cruelty free
Answer:	Yes
Question:	can this be used with all air brush systems - I have a Luminess
Answer:	I users with my Luminess and found it too be just a tad thicker than Luminesse foundation (maybe it was just that one bottle I got) , it doesnt spray on as smoothly, so I add a drop of water and back bubble to mix, it comes out perfectly.

Product description

VLST-3W Double Action - Internal Mix - Siphon Feed Airbrush: The VLS series is one of our most popular Airbrush due to its durability and ability to spray most material whether thick or thin. It has the added feature of a threaded connection which allows the bottle to lock onto the airbrush for a more secure fit. The stainless steel needle and nickel silver tip handle water based or solvent based mediums. The VLS airbrush offers versatility with three interchangeable head sizes. This model can achieve spray patterns from fine detail to broader coverage handling light, medium and heavy fluids. The rounded head allows for easy removal of any dried paint with just a pinch of your fingers. VLST-3W Includes: VLST airbrush with size 3 head, size 1 & 5 heads, 1 oz bottle assembly, 1/4oz metal cup, 1oz storage bottle, 6' braided hose, hanger, wrench and lessons book, packed in the wood case. Features: Airbrush Made In The USA Three head sizes for any application Threaded bottle connection for the most secure bottle connection of any airbrush Highly polished & hardened stainless steel needles for long life and reduced clogging Line adjustment screw that can be used to pre-adjust paint flow Solvent proof PTFE needle packing allows spraying of water & solvent based paints Removable needle protector for fine detail spraying Chrome plated body Specs: Part Number: VLST-3W Type: Double action, Internal mix, Siphon feed Head Size: Size 1 (. 55mm), Size 3 (. 74mm), Size 5 (1. 05mm) Fluid Packing: PTFE - Can spray solvent or water based fluids Air Volume: 20 PSI @ . 5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼"-20 Thread (Paasche thread) - adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32" to 1-1/2" Weight: 2. 6 Lbs Finish: Chrome plated body

• Three head sizes for any application
• Line adjustment screw that can be used to pre-adjust paint flow
• Solvent proof PTFE needle packing allows spraying of water & solvent based paints
• 1/8"BPS Adapter (Paasche Airbrush to 1/8BPS hose)
• Airbrush Made in the USA

Product description

The spray can be easily adjusted for metallic colors, quick drying paint and other paint characteristics by simply controlling only airflow - no pressure adjustment is needed. Push down the semi-easy soft button to adjust the fineness of the needle without paint squirting out when pulling the button. This enables smooth spraying whenever you pull the button.

• Features air adjustment system
• Features semi-easy soft button
• 0.2mm nozzle

User questions & answers

Question:	Can the needle be swapped out for any other sizes
Answer:	Yea but you'll have to get the needle nozzle and air cap for it to work because they are all size specific
Question:	What Hose does it need
Answer:	It comes with a basic 1/8" plastic hose. I would upgrade to a soft braided or flexible hose that has male and female 1/8" threads.
Question:	Does this support a 0.5mm needle? If so can you provide a link for the kit
Answer:	I think that is the 2mm one but you could get a needle nozzle and air cap that's 5mm. I get my parts for mine on spraygunner.com or from them on their Amazon site. Hope this helps you out.
Question:	What air compressor do you recommend for this airbrush
Answer:	Hello, We have few options here at SprayGunner, starting with L7 model made by the same company (GSI creos), some good Sparmax compressors from $150 or some low budget made in China compressors which will work as well. Please note, that SptayGunner ships from Florida, US so you'll get the airbrush much faster than buying from Japan for the same price. Thank you!

Product description

Premium-grade air hose engineered specifically for use with airbrush painting, Popular 10-foot length allows easy movement & reach without being cumbersome, Unique braided wall construction resists kinking or twisting with excellent flex & durability, Non-rusting zinc connections for leak-free performance; 1/8" BSP airbrush, 1/4" BSP for air supply, Professional-artist quality at a price for hobbyists; plus, hose looks as good as it performs!

• Premium-grade air hose engineered specifically for use with airbrush painting
• Non-rusting zinc connections for leak-free performance; 1/8" BSP airbrush, 1/4" BSP for air supply
• Unique braided wall construction resists kinking or twisting with excellent flex & durability
• Professional-artist quality at a price for hobbyists; plus, hose looks as good as it performs!
• Popular 6-foot length allows easy movement & reach without being cumbersome

User questions & answers

Question:	Does it fit badger
Answer:	I honestly don't remember it's been so long ago because it was bought for a grandson of mine as part of a gift with a little air compressor for air brushing
Question:	What is the correct length
Answer:	I received a ten feet (10) hose with an adapter for the compressor side of the hose.
Question:	what pressure is this rated for
Answer:	Since it's an airbrush hose it is really not ment for excessive psi. I use mine at only about 25psi but would figure it could withstand 45 psi easy. Probably not much more then 50 psi. educated guess. I coat firearms and use it frequently, haven't had a problem with this hose.
Question:	Will it fit oil-free hotdog air compressor ( harbor freight
Answer:	You will need to get an inline air regulator and moisture trap to use that compressor with an airbrush. Those should include most of the adapters you need to hook this up.

Product description

Specifications:

1. Nozzle Diameter: 0.4mm

2. Fluid Cup Capacity: 2cc

3. Operating Pressure: 15-30 PSI

4. Switch Mode: Single-Action Trigger Control

5. Paint Distance: 50 ~ 100mm

6. Length of Spray Pen: 5.55" / 14.1 cm

7. Weight: 210 g

8. Color: Silver Package Includes: 1 x Airbrush 1 x Nozzle Spanner 1 x eye dropper 1 x Storage Case



Package Includes:

1 x Airbrush

1 x Nozzle Spanner

1 x eye dropper

• New and high quality
• Abest makeup Cosmetic Airbrush provides detailed touch
• Only a few drops of makeup and blush are required
• Suitable for most brand water base airbrush makeup foundation
• With a gravity-fed cup 2CC cup, cleaning is fast and simple

User questions & answers

Question:	What air compressor do you recommend
Answer:	I use a Dinair one.
Question:	Is this come with compressor
Answer:	No
Question:	What air compressor do you recommend
Answer:	You can try our compressor just like AC01R https://www.amazon.com/dp/B00HJGD5MS they are perfect match
Question:	What air compressor do you recommend
Answer:	You can try the ABEST air compressor AC01SRK/AC01SR,It has a lot of good air compressor.
Question:	Where do I get replacement needles / parts
Answer:	Amazon has them or you could try TCPglobal.com
Question:	Is the handle on the vlst-pro plastic or cut away aluminum
Answer:	Plastic, 100% sure. There is an aluminum handle available.https://www.amazon.com/gp/product/B000PTD7L0/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Question:	Does this use a 1/8 NPT connector
Answer:	It uses a 1/4 connector .If any questions call Paasche
Question:	is it gravity feed
Answer:	It has both gravity feed and suction feed capabilities. Paint containers for both options are included.

Product features

VLST-3W

The VLS series is one of ourmost popular Airbrush due to its durability and ability to spray most material whether thick or thin. It has the added feature of a threaded connection which allows the bottle to lock onto the airbrush for a more secure fit. The stainless steel needle and nickel silver tip handle water based or solvent based mediums. The VLS airbrush offers versatility with three interchangeable head sizes. This model can achieve spray patterns from fine detail to broader coverage handling light, medium and heavy fluids. The rounded head allows for easy removal of any dried paint with just a pinch of your fingers.

Features

• Three head sizes for any application

• Threaded bottle connection for the most secure bootle conenction of any airbrush

• Highly polished & hardened stainless steel needles for long life and reduced clogging

• Line adjustment screw that can be used to pre-adjust paint flow

• Solvent proof PTFE needle packing allows spraying of water & solvent based paints

• Removable needle protector

Specs

Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm)

Fluid Packing: PTFE - Can spray solvent or water based fluids

Air Volume: 20 PSI @ .5 CFM

Air Pressure: 20-75 PSI

Air Inlet: ¼"-20 Thread (Paasche thread) - adapters available

Bottle size: 1/4oz to 8oz bottles available

Spray Pattern: 1/32" to 1-1/2"

Weight: 2.6 Lbs

• POWERFUL COMPRESSOR - 1/5HP high-performance, oil-free piston air compressor delivers 23-25L/min air flow; Equipped with an air tank to provide smooth air flow and ensure zero pulse while in operation; Designed for quiet operation, with only 47 dB of noise
• DUAL-ACTION DESIGN - Designed with dual-action gravity feed airbrush to save painting material and spread paint evenly and efficiently; Ideal for professionals or painting enthusiasts
• ADJUSTABLE PRESSURE - Comes with an air pressure gauge and an air filter water trap, which provide clean and dry air at a precisely measurable and regulated air pressure; Easy and convenient to operate
• SAFETY ASSURANCE - Designed with an automatic shut-off mechanism to keep the motor for overheating; Additional safety protection devices are built-in for the air tank as well
• MUTLIPLE FUNCTIONS - This airbrush covers a wide range of uses from commercial art, temporary tattoos, sunless tanning, cake decoration, cosmetics, costume make-up, crafts, illustrations, retouches, and any other airbrushing activities

User questions & answers

Question:	Can you buy just the air tank without the compressor
Answer:	They do sell just air tanks on amazon and ebay
Question:	How can I get replacement parts or the airbrush? Such as needles, needle nosal, and other parts
Answer:	I went to the website
Question:	Where can I get extra needles, and are these compatible with needles that work with the Master brand G
Answer:	Yes, they are compatible and you can search the model type just on Amazon to purchase extra needles.
Question:	What is the difference betweenthe this one and the thankless
Answer:	I do own both and hope this helps. The most notable difference is in the lack of pulsation in the air supply as well as less of a duty cycle for the compressor itself for the model with the reserve tank. For the difference in price I personally would have just purchased the tank model off the start. Both have been extremely reliable and although I would have started off differently had I tried out both models before making my first purchase, I don’t regret either one. If the difference in cost is not a purchasing consideration and if I were to pick only one of the two, the tank model would be my first choice.

Product features

VIVOHOME Airbrushing Paint Compressor Kit

VIVOHOME’S Airbrushing System is an oil-free, piston-type airbrush compressor equipped with a gravity feed, dual-action airbrush. It works excellently for most airbrushing applications and on a number of surfaces including fabric, wood, leather, plastics, metals and more. Perfect for any hobby or artist airbrushing. Includes 1 airbrush 1 nozzle that delivers different degrees of spray and controls for various applications. Ideal for hobbyists and artists alike!

Know More About Airbrush Compressor

Main Specification:

• Power: 1/5HP
• Voltage: 110-120V/60Hz
• Air output per min.: 23-25/min.
• Safety valve: Release the air pressure automatically when the pressure over 6bar in the air tank.
• Max.pressure: 3-4Bar/43-57Psi
• Air tank: 3.0L
• Fitting: Manometer; pressure regulator; air filter
• Connections: 1/8" and 1/4''
• Electric Cable: 5.9feet

Know More About Airbrush

Main Specification:

• Feed Type: Gravity
• Standard Nozzle Dia.: 0.3mm
• Alternative Nozzle Size: 0.2mm, 0.3mm, 0.5mm
• Cup Capacity: 7CC
• Working Pressure: 15-50PSI
• Feature: Dual-action Trigger air-paint control

Portable Handle

Lightweight with 180° portable handle makes it convenient to carry or transport. The airbrush is suitable for indoor or outdoor use--anywhere your needs require.

Pressure Gauge

Equipped with an accurate scales pressure gauge. Allows for careful adjustment of pressure according to different airbrushing needs.

Safety Valve

The safety valve keeps the pressure stable, ensuring airbrushing machine works continuously even under heavy pressure. DO NOT REMOVE THE SAFETY VALVE.

Product description

The airbrush features a chrome plated body and aluminum anodized cutaway handle. The TS includes all four available heads and can achieve detail down to 1/64 inch and using our included fan head wider patterns up to 3 inches. A PTFE packing enables the TS to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TS can be used for many applications including hobby, craft, automotive, t-shirts, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The TS airbrush is made in the US. Includes 1/8"BSP Adapter that work with most competitiors hoses.



TS-4WC Includes:

TS#3 airbrush, Size 1(0.25mm), size 2(0.38mm) & 4(1.0mm) spray heads, fan aircap, 1oz glass bottle assembly, 1oz glass storage bottle, hanger, wrenches, 6 ft braided hose, lessons booklet and manual.



Features:

• Airbrush Made In The USA

• Highly polished & hardened stainless steel needles for long life and reduced clogging

• Solvent proof PTFE needle packing allows spraying of water & solvent based paints

• Four head sizes for any application

• Anodized aluminum handle

• Chrome plated body



Specs:

Part Number: TS-4WC

Type: Double action, Internal mix, Siphon feed

Head Size: Sizes .25mm, .38mm, .66mm & 1mm Heads included

Fluid Packing: PTFE - Can spray solvent or water based fluids

Air Volume: 20 PSI @ .5 CFM

Air Pressure: 20-75 PSI

Air Inlet: (Paasche thread) - 1/8"BSP Adapter

Bottle size: 1/4oz to 8oz bottles available

Spray Pattern: 1/64" to 1-1/2" plus up to 3" with Fan Aircap

Weight: 1 Lbs

Finish: Chrome plated body

• Fan aircap for wider coverage
• Solvent proof PTFE needle packing allows spraying of water & solvent based paints
• Four head sizes for any application
• 1/8"BPS Adapter (Paasche Airbrush to 1/8BPS hose)
• Airbrush Made in the USA

Product features

Paasche Airbrush

The TS-4WC airbrush features a chrome plated body and aluminum anodized cutaway handle. The TS includes both available heads and can achieve details down to 1/64 inch and by using our included fan head it can achieve wider patterns up to 3 inches.

Includes:

TS#3 airbrush, wood case, size 1(.25mm),2(.38mm), 3(.66mm) & 4(.95mm) spray heads, fan aircap, 1/4 oz metal cup, 1 oz bottle assembly, 1 oz storage bottle, 1/8 BSP adapter, hanger, wrenches, 6 ft braided hose, lessons booklet and manual.

High-Performance Spraying

The polished & hardened stainless-steel needle offers long life and reduces clogging. Attain even the finest spraying with the removable needle protector!

Multiple Applications

The airbrush can be used for various applications including hobby, craft, automotive, t-shirts, taxidermy, ceramics, cake decorating, tanning, tattoos, and so on.

Easy Cleanup

A PTFE packing allows the TS to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping off the needle.