10 best led light sources
- ✔More Even and Comfortable Light Distribution with 22pcs 2700K Warmwhite Energy-saving LED Chips
- ✔Low Profile Design with Dark Bronze Textured Finish
- ✔Durable Powder Coated Die-cast Aluminum Housing
- ✔Come with Versatile Stainless Steel Mounting Bracket, Pre-wired 39 Inches SPT-2 18AWG Leads
- ✔UL Listed for Safety and Quality. Comes with 5-year Warranty.
User questions & answers
Question: | What would you thing of placing these on edge of concrete around a pool by drilling into the side of concrete and having them face inward |
Answer: | Yes you can listen to it while it's on charger |
Question: | Can you replace the bulb in case it goes bad |
Answer: | I’m not sure what you mean by “how full the charge is” if your referring to how much charge is in it when you get it,mine worked when I recieved it but I charged it over night before I used it. If your asking how long a charge will last,I use mine at work and usually it will last 2-3 days before I have to recharge it |
Product description
Built-in IC chip technology provides Overcharge Protection System, Short circuit, Overload protection, Over-heat protection
Overload protection of 120% of the rated power, can be automatically restored
Widely Application: LED Strip light, LED table lamp, Arduino projects, ADSL Cats, CCTV Camera , Home Security Camera, Amplifier, Home appliances, USB HUB, Switches, Wireless Router, Audio/Video, etc
- Fully Regulated Switching Power Supply Ideal for 12V DC Security and surveillance devices: DVR, NVR, Cameras, IPC, Led Light Strips and more
- Input: AC100 ~ 240V, 50/60Hz, 0.3A max Output: DC12V, 2000mA
- Power cord length: 3.3Ft / 1M
- Full Production, Over-Voltage, Over-Current, Over load, Short Circuit Protection
- Widely Application: LED strip lights, Arduino projects, ADSL Cats, CCTV Camera, Amplifier, Home appliances, USB HUB, LED table lamp, Wireless Router, Audio/Video, etc
User questions & answers
Question: | Yes the one that i will need has to fit my at&t landline phone for the caller id |
Answer: | I have had to replace several as most of my power adapters were lost due to flooding. I'm no expert but from what I've seen there are two different size/types depending on the port that it will plug into on device. This one is a hollow round adapter, the other type I've seen is a very thin piece that is solid. Let me know if you need a picture that you can compare to your device |
Question: | how long is the chord |
Answer: | The cord is 3 feet, 7 inches long (or 43 inches) |
Question: | Can you use this to charge a lithium battery |
Answer: | I personally would not because there is no auto shut off charge once battery is full. It will keep on charging till you disconnect it. |
Question: | Will this unit supply power for a hp mini 1000 p/n fq729aar |
Answer: | I looked at this device requirements for you and it appears to require 19 Volts and the power supply you asked about only provides 12 Volts. You should have the same volts required for a device and at least the same amount of required Amps. Your device requires 19V - 1580 mA (1.58A). |
- ✔6pcs 2700K Warmwhite Energy-saving LED Chips Contribute to More Even and Comfortable Light Distribution
- ✔Pre-wired 39 Inches SPT-1 18AWG Leads
- ✔Durable Powder Coated Die-cast Aluminum Housing
- ✔Come with Versatile Stainless Steel Mounting Bracket
- ✔Small size, more flexible for various applications
Product features
Product Information
Featuring 6 2700K LED chips that ensure even and comfortable light distribution, GKOLED Hardscape Lights can be used to provide subtle entrance and perimeter lighting and are suitable for both commercial and residential settings. Their low-profile design and compact size allow these fixtures to be used in a wide variety of applications. Die-cast aluminum housing and a durable powder-coat finish prevent weathering and corrosion. A stainless steel mounting bracket and mounting hardware are included with the light.
Please note that these are low-voltage lights, a low voltage transformer (not included) is required. These lights may not be used with 120V or higher line voltage, and doing so will damage the lights.
Quality You Can Count On
As a top-rated Amazon seller, we stand behind the quality of our lights and our top-notch customer support – just check out our reviews and shop with confidence. Our products are stocked in the US, with US-based customer support. We look forward to making your next outdoor lighting project a success!
About GKOLED
GKOLED by Gingko Lighting Corp. specializes in high quality commercial and residential LED lighting at affordable prices. Our residential LED products come in classic styles that are sure to enhance the atmosphere and appeal of your home and garden, to ensure the perfect setting for your important moments. We strive to make every lighting project smooth and successful, and are confident that you will love the quality of our lights and our top-notch customer support. Be sure to check out our other products here on Amazon!
- ✔【INPUT&OUTPUT】: 100-240V AC input 50/60HZ, DC 12V 2Amp output, 24 Watt max wattage
- ✔【WIDE APPLICATION】: Convert 100-240V AC to 12V DC, widely use for SMD2835 3528 5050 RGB LED strip lights, LED string, wireless routers, ADSL Cats, HUB, switch, security camera, Audio/Video power supply
- ✔【KINDLY NOTE】: Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage(24 Watt) of this adapter
- ✔【PACKAGE INCLUDES】: 1 x 12V 2A 24W power supply with 3.3ft power cord, 1 x 5.5/2.1 DC female barrel connector to screw adapter
- ✔【HIGH QUALITY】: With 1 year warranty, and our seller support team always stand behind our products in any way, so please contact us for solution if you have any quality problems
User questions & answers
Question: | Can this be used for lighting a dollhouse |
Answer: | Here is the manual online. I had lost mine too. https://www.manualslib.com/manual/947339/Sylvania-Sp230.html |
Question: | I have a 12 volt 10 watt water fountain pump, that will run approx. 12 hours daily. Will this transformer be adequate |
Answer: | I bought it for use with a Sylvania under-the cabinet kitchen radio. Could never get it to work. Got NO help from either Sylvania or Amazon; couldn't even figure out how/where/to whom to return it. Total lemon. Gave it Goodwill. I hope someone at Sylvania or Amazon reads this... |
Question: | I purchased the unit to power a 16' 12v 24w led strip, but the adapter is running at 170f. is this normal/safe |
Answer: | Sylvania portable Bluetooth speaker has 6 watts. |
Question: | Can it work for cctv Cameras |
Answer: | Yes it will, I have a service truck and do all my work outside in Ohio and mine gets down into the coldest temps and it works great |
Product features
Product Specifications:
- DC Jack Type: 5.5 * 2.1mm male
- Plug Type: US two prong
- Input Voltage:AC 100-240V
- Input Frequency Range: 50/60Hz
- Output Voltage: DC 12V
- Output Current: 2Amp
- Output Voltage: 24Watt
- Wire Length: 20 Awg, 100cm long at outlet end.
Kindly Note:
- This item is power adapter (transformer) of DC 12V Low Voltage, use for LED Strip Light, CCTV Camera and so on.
- Please be kindly informed that the total wattage of LED strip lights or other items should not exceed the max wattage (24W) of this adapter.
- And we suggest it to be de-rated 10%-20% when using to prevent overheating.
Warnings:
- Don't open or modify the led power supply
- Please leave children, kids far away from high voltage power source
- Please use it under professional electrician's guides
- 【Simple Design】LED hardscape lights increase the appearance and security. The 7" 12V low pressure deck lighting is ideal for paver steps, hardscape steps, retaining walls, decks, flower beds or any downlight function.
- 【Waterproof and Dustproof】The grade of hardscape lighting is IP65, which can avoid contact with harmful dust and can help prevent rainwater from entering the lamp.
- 【Energy-saving Design】The low-voltage landscape light can provide 250 lumens of output, only consume 4.3 watts of energy to create better lighting effects, and bring the best quality to your life.
- 【Durability】The step light is made of a solid powder coated die-cast aluminum housing. It also includes 10 feet of low-voltage cable.
- 【After-sale service】Ankita offers a 5-year after-sale service for LED hardscape lights. If you are not satisfied with the purchase, please contact us. We would love to help you solve the problem. Ankita will bring you the best quality decorative lighting to meet your needs.
User questions & answers
Question: | Do you carry color Black for these lights |
Answer: | It comes with a usb cord to plug for charging, I only use to Bluetooth option to connect to my devices but you can buy an adapter cord to plug in to laptops and phones |
Question: | Too bright. How can I dim them |
Answer: | Thank you for your interest in the Sylvania Rugged portable speaker. The internal battery is a lithium ion rechargeable battery, that is non replaceable and is charged with the included USB cable to any power source (computer or laptop, or connect to a USB wall charger)We look forward to assisting you with this item and any other products you may be interested in as well.Pack It-n-Back It |
Question: | Hello, I need 8 lights but am only able to buy two. Can you tell me when they will be back in stock |
Answer: | I think so but i'm not sure. I charges well though. 30 mins will give you at least 3 hours of play. we only charge it once a week max |
Question: | Are these black powder coated or bronze |
Answer: | You can adjust the volume through the device connected through Bluetooth. |
Product features
Perfect Lighting
The Ankita hardscape lights provide safety around steps and add a warm and welcoming glow to a space. They are weather resistant and easy to install without using any tools. These types of lights work seamlessly to illuminate steps and brighten under ledges
Outdoor Use
This light can work under a working temperature range from -4℉ to 122℉ and has an IP65 waterproof rating. It is ideal for wet outdoor locations
Wide Application
This light can be widely used to light up your landscape steps, retaining walls, decks, flowerbeds, and masonry walls, barbecue fire pits thanks to its 12V AC/DC voltage. You can cut the stainless steel plate along the dotted line on it, which is convenient to adjust the width in accord with your actual needs
- 【App Control Kit】Controlling the Led strip lights via App,24key remote control and controller,strip lights has a smart music mode,lights color will change with the the rhythm of the sound and music.create a romantic,gorgeous,interesting,magical atmosphere for your party
- 【Timing Led Lights Strips】You can adjust the lights strip brightness to suit the various places,Led strip lights have memory function,when the strips are used again,they remember the last mode settings without setting again,with the smart App,you can experience the timing function,automatically turn on and off at preset time,28 Dynamic Modes can be chosen,you can also Diy your unique color
- 【Multiple Scenes Available】Led strip can be used for decorating your Dining room,Bedroom,Upstairs,Porch,Computer,desk,Corner,bar,meeting room and Living rooms,especially great for Holidays and Events like Christmas,Halloween,Parties and more
- 【Easy to Use and Install】Fully equipped accessories,it comes with 3 reel of 16.4ft Led light strip,an AC Power Adapter,a 24Key remote Control,a controller,a Adhesive Pad,2 pcs 4Pin Connectors,4 Buckles and a Instruction Manual.easy to install
- 【Purchasing Experience】Please carefully read the user manual carefully before strip lights using.if you have any questions,please don't hesitate to contact us
User questions & answers
Question: | Are these returnable |
Answer: | Hello, the fixtures come with integrated LED chips so no bulbs can be replaced. But the fixtures can be removed from the mounting plate without removing the wall cap. |
Question: | How long is the power cable |
Answer: | The first and last picture barely shows it (I recommend looking at the first pic). Zoom in on the bottom left portion of the picture. There’s two reasons you may have missed it. 1) For this model the logo is actually on the side of the phone/case as opposed to the usual location which is: top-right of the back of the phone (opposite the camera). If this case was a book, the logo on the bottom of the spine. 2) it also doesn’t have the speck logo you are accustomed to seeing that looks kinda like (X) with a vertical line going through the “X”. It actually says “SPECK”. It’s really hard to see what it actually says from the pic but it’s there. I personally like this location because it looks less intrusive and doesn’t stick out as a marketing ad. Plus it’s a clear case. So the location is less invasive to the natural beauty of the phone. I wondered about this too because I always get speck cases for all the iPhones in our family. Rest assured, the seller is from the official Speck Store on Amazon. The link at the top will take you directly to the Speck Store. |
Question: | I would like to have the lights around the top of the room totaling 45 feet 2 inches. Can I do that with these lights |
Answer: | I have no idea if it is synthetic or latex. I do know I have had zero issues with the phone case and it is still like new all this time later. |
Question: | Can it be used outdoors |
Answer: | I think it works with anything that will Bluetooth. |
Product features
The strip lights roll
The package contains :
-3 x 16.4 ft RGB 5050 SMD LED Strip Light (50ft)
-1 x V Adapter
-1 x 40 Key IR Remote
-1 x controller
Children bedroom
It's hard to imagine how dull it would be at night in an ordinary room without light decoration
Magic room
A number of different fixed light sources can be set to build a magical atmosphere
Forest and tree model
Different interior themes are presented by adjusting the color changes of the lights. As is shown in the picture, the lighting gives a forest-like feeling
Sweet model
It can also be set dynamically to automatically switch the indoor light between different colors. Sometimes bright, sometimes warm, sometimes romantic
- Application: Suitable for all 10mm wide (0.39 in) 4-pin SMD 5050 RGB flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. Ideal for extending the LED strip and straight connection.
- Easy to Use: Quick shunt connection and solderless snap down. Open the clip and slide the light strips under the 4 contact prongs, making sure the “+” signs of the two light strips on both sides are aligned.
- Fireproof Material: JACKYLED led connectors are made from PBT material, which is heat resistant, fireproof and no Fire Hazard. 72W max wattage, which can be used for low wattage and high wattage light strips.
- Note: Make sure you put the led strip under the pins and not on top. Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
- Package: 10 pcs 4 pin led clip connectors. If you have any issues, inquiries or need assistance, please feel free to contact us directly.
User questions & answers
Question: | Well these work for 6 pin strip |
Answer: | This is advertised as a 24 watt power supply so yes, it should work fine for your 10 watt pump.. I would not recommend using outdoors. I happened to drop mine about 3 feet on to a wood floor and the case cracked open. |
Question: | how long did these take to ship |
Answer: | I don’t know what 170f is in your question. The output of the unit is 12vdc at 2 amps. Ohms law is used to calculate power consumption. 12x2 =24 watts. If your are referring to temperature, you will have to look up the specs on your strip. It seems pretty hot if it is. |
Question: | I have 3 boxes and the end of each set is flat like shown in your video but the new set has 4 prongs what should i do |
Answer: | Yes, If it accepts the type of plug and DC voltage requirements. |
Question: | Will these work with govee rgb led modelh |
Answer: | it would work, but you might want to try just one. before doing the hole pool. These are low voltage light 12v |
Product features
Used with L Shape RGB Boards
Used with T Shape RGB Boards
Used with X Shape RGB Boards
- 1.【Curing All Gel Polish】With new professional designed UV+LED 365/405nm dual light source, our nail lamp is applicable to curing almost ALL nail gels! Like UV gel, builder gel, sculpture gel, rhinestone gems glue, CND Shellac, OPI and LED nail gel. No brand requirements though! NO NEED FANS!
- 2.【80W High Power,Quick Drying】42 light beads evenly distributed, no dead zone, drying nail polish in all directions, quickly and efficiently. Also, with special technology, the light is like sunlight, not single UV light, it will not hurt your eyes, and no more black hands during nail curing. Coming with adpater, power cord and US plug, voltage:100V-240V 50Hz/60Hz
- 3.【Upgraded Version Larger Space】Our SUNX PLUS model nail lamp is a upgraded version of SUNX, having larger space, you can dry the nail polish with whole hand, save your time. And, there is a removable bottom, it can used easily applied to your feet, also easy to clean.
- 4.【4 Timer + Double Power Option】Flexible Drying Options with 4 timer setting: 10s/30s/60s/99s low heat mode, easy to use with a smart sensor, also 80W/54W switch freely in 2s press, enjoy professional nail curing, IDEAL CHOICE FOR BOTH SALON AND HOME.
- 5.【100% Satisfaction】We are committed to solving all customer problems, if there is any product issues, please just contact us, we will solve it in short time. Customers satisfaction is our first priority. BUY IN CONFIDENCE!
User questions & answers
Question: | Can you use it without having the base attached |
Answer: | Yes you can. Just make sure that after you cure the gel, you wipe away with a alcohol pad. Then you can use any regular polish on top. |
Question: | Where is this manufactured |
Answer: | It’s not a top coat gel, it’s a builder gel which can be applied on top of your natural nail or tips only and is used for nails extensions. Please see the detailed instruction on how the gel should be used:) |
Question: | Is it portable |
Answer: | Hi, the builder gel has thick consistency and the formula works better for building up. If you are looking for a product just to reinforce and strengthen your nail we recommend to go with IN.HYPE Structure gel. It has thinner consistency than builder gel, but thicker than gel polish. It works perfect as a thin base coat. |
Question: | does it have a fan |
Answer: | Yes I use it that way works well if nail is prepped well |
Product features
Quick & Efficient Curing
1. 4 Timers Setting
Flexible Drying Options with 4 timer setting: 10s/30s/60s/99s low heat mode, also easy to use with a smart sensor(120S Max one time)
2. Painless mode
When you choose "99S Low Heat Mode", it is Painless Mode. Under this mode, the output power will increase gradually (the light will become more bright gradually), the gel will be cured gently at first, the curing will become stronger little by little along with the power increase, it will relieve the pain that may caused by quick drying. Good for sensitive nails!
3. Dual Power Option
There are 80W/54W options, you can switch freely in 2 seconds press, meet different demands, enjoy professional nail curing.
Removable Bottom
With a removable bottom, makes it more flexible to dry toenails and also easy to clean. There is a magnet in the bottom, easy to connect.
Fits The Whole Hand Or Foot
A wider opening space, it is large enough dry all 5 fingernails or toenails one time. Quick, efficient curing allows you to easily achieve a variety of designs, save your time.
Convenient Handle
Specially added handle, easy to carry, especially when curing toenails, you do not have to touch the lamp body.
WHAT'S IN THE BOX?
1x SUNX PLUS 80W nail lamp
1x Power adapter (US plug)
1x User manual
1x After-sales service card
Product description
WOKYY - MAKES WORKING EASY
Compatible Battery
Milwaukee M18 Lithium-Ion Batteries 48-11-1840, 48-11-1850, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1860, 48-59-1850 and more
Technical Details
Battery Type: Lithium-Ion
USB Output: 5V / 2.0A * 2-Port
DC Output: 12V
Package included
1 * USB Power Source
- VERSATILE BATTERY CONVERTER - 100% compatible with Milwaukee M18 Lithium-Ion Batteries 48-11-1840, 48-11-1850, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1860, 48-59-1850 and more. Converting your battery into mobile power supply.
- BRIGHT LED LIGHT - Equipped with 140LM flashlight, two brightness and flashing mode. Not only works as a work light on the job site, but also suitable for camping, or emergency light for home power failure.
- DUAL USB & DC OUTPUTS - Independent 5V/2.0A output from each USB port to provide quick and easy charging for your phones or other tools. 12V/2A DC port for emergency use.
- CE FCC CERTIFIED - 100% safety assurance for batteries and your devices. Provides protection against short-circuit, over-voltage, and over-current. Solidly built for lasting longer and help you better.
- 100% SATISFACTION GUARANTEE - Behind high quality products stand our professional technical supports and timely customer services. Please order with confidence and let us know first if any concern or problem.
User questions & answers
Question: | What batteries goes it work with? Just XC |
Answer: | All I know is that I needed a replacement |
- The light pad dimension is 13.2 in by 9.2 in with lighting area 12.2 in by 9.2 in. The thickness is 0.2 in (5 mm).
- Smooth and No Glare light area provides good back light for design, art tracing, photo viewing, t-shirt art creating, art transferring etc
- The light has 3 brightness level adjustable settings. Touch button for on off and brightness control. Comes with a USB cable, can be powered from usb power source
- Can be used for stenciling, 2D animation, calligraphy, 5d diamond painting, embossing, scrapbooking, sketching & drawing, stained Glass, 5d diamond painting et
- The light pad has black mesh pattern on the lighting area. May not be good for negative photography viewing
User questions & answers
Question: | I have seen two comments about using it for weeding vinyl is there anyone else out there that has used it for weeding |
Answer: | I weeded vinyl professionally and never did use a light table. If you cut it correctly you don't need anything but an exact I knife. Even if it was negative that was kept still didn't need it. It should only take a minute to weed a 18" X 24" sheet with almost any size of lettering or designs. |
Question: | Can you use this to trace pattern on a canvas to paint |
Answer: | The light box has three brightness settings, but I do not think even the brightest setting would work through canvas. |
Question: | Would be able to trace onto cloth |
Answer: | Absolutely. That is why I bought it. |
Question: | Do you open the glass to put paper between and then close it and put a clean paper on top to trace |
Answer: | No. You put your picture that you like to trace on top and then your blank white paper on top of that. Just like light table. |
Product features
Soft White Light
Soft white light, no more sore eyes after long time using. And simply keep pressing the touch switch for several second until you get the desired brightness which you want.
3 Step Brightness Adjustment
Touch sensor switch design, turn on/off and brightness control easily just by keep pressing the button till you get the ideal brightness.
Compatible
Power supply by usb cable which mean easy to access to any usb port like computer, usb adapter or even power back.
Latest Reviews
View all
Lg Wifi Speakers
- Updated: 05.02.2021
- Read reviews

Converse Skate Shoes
- Updated: 14.02.2021
- Read reviews

Slimming Belts
- Updated: 20.07.2021
- Read reviews

Dry Duffles
- Updated: 20.03.2021
- Read reviews

Sacd Cd Players
- Updated: 11.04.2021
- Read reviews