14 best mold makers

Product description

Silicone Plastique is an amazing mold putty that has the consistency of cookie dough and is very easy to mix and apply. Created by a chef in order to bring the art of mold making into both commercial and home kitchens, Silicone Plastique has become the “Gold Standard” in the creation of custom food molds around the world. Mold making has always been considered a complicated task, yet with this silicone mold putty a new world of easy mold making has been made possible. Once mixed, Silicone Plastique will stay workable for about 15 - 20 minutes giving ample time to make an accurate and well made mold of almost any object. Cure time is only about 60-75 minutes at room temperature to create a pliable yet durable rubber mold suitable for direct food contact. Cured Silicone Plastique can be put in the freezer without losing flexibility and accepts temperatures as high as 400 - 450 degrees F. Silicone Plastique is a food grade product and complies with U.S. regulation: 21CFR177.2600 and has been tested by an independent, accredited laboratory to confirm its food grade status. It may surprise you to know that almost half of our mold making customers purchase Silicone Plastique for use with non-food materials. Reasons given are ease of use, high quality from a platinum based curing system and the peace of mind that comes from using a product that is not harmful, toxic or emits dangerous fumes.

• SO EASY TO MAKE YOUR OWN MOLDS - Simply combine equal parts of A (White) and B (Blue) and mix by hand until uniform color. Stays put on almost any surface even vertical. No mixing containers, mold boxes, degassing equipment required. Creates strong, flexible, reusable, commercial quality molds.
• MAKE YOUR OWN MOLDS RIGHT THE FIRST TIME - Generous 15 - 20 minute work time for maximum detail capture on small and large objects. Demold time only 60-75 minutes at room temp. Perfect for beginners and professionals alike. Applying heat with a hair dryer greatly reduces demold time if in a hurry.
• TESTED TO CONFIRM FOOD GRADE COMPLIANT & NON TOXIC - Extraction tested by a certified lab. Safe for both water based and fat based foods. Odor free, BPA free and made 100% in the USA.
• RECOMMENDED FOOD APPLICATIONS: Chocolate, Fondant, Gummies, Edibles, Butter, Fudge, Cookie Dough, Marzipan, Ice, Candy, Gelatine, Cake Decorating, Beer Brewing, Wine Making and More.
• PERFECT FOR NON-FOOD USES: Clays, Resins, Epoxies, Prototype Reproduction, PMC & Polymer Clay, Soap, Art Restoration, Sculpture, Plaster, Wax, Low Melt Metals, Jewelry Making, Tabletop Gaming, Cosplay, 3D Printing, DIY Gaskets & Seals, Concrete and More.

User questions & answers

Question:	I want to cast this in a drainage hole of a kayak to create a removable custom-fit plug. Will this stick to the polypropylene plastic of my kayak
Answer:	Silicone Plastique will work perfectly for this application. It will not bond to the plastic of your kayak. It is easy to use and create a nice seal.
Question:	Can this be used to make a mold of a candy bar
Answer:	Silicone Plastique works very well when making any type of candy, including candy bars. Feel free to confidently use a Silicone Plastique mold for chocolate, nougat, caramel, lollipops, hard candy mixtures, taffy, fondant, gum paste, marzipan and more.
Question:	Can this be used to create molds for baking
Answer:	YES IF YOU USE THE RIGHT KIND OF ITEM TO MAKE THE ITEM IN THE MOLD.
Question:	Hello do use mold release spray on your items to be molded? Or is this nonstick
Answer:	Sealed and nonporous surfaces can be molded without any sealant or mold release spray. However, if an item is porous, for example wood, un-glazed ceramic, a seashell or any other natural material, the silicone will get into the pores of the object and create a mechanical bond that will prevent you from un-molding your object. You would want to seal these types of items for successful molding.

• PREMIUM MOLDS MAKING SILICONE MATERIAL: Our translucent liquid silicone are made by safe silicone material, non-toxic and no odor, very flexible, soft and clear.You could also mix mold making silicone with mica powder to create new colors.l, non-toxic and no odor, very flexible, soft and clear.You could also mix it with mica powder to create new colors.
• EASY MIXING & POURING: This silicone molds making kit includes part A and part B, the mixing ratio is 1:1 by weight. Pour the Part A and Part B together, then stir the silicone rubber for 5 minutes, make sure to stir the liquid silicone mixture thoroughly for better results.The working time is 5 minutes at room temperature.
• NO BUBBLES: The bubbles of liquid silicone will automatically disappear within 2 hours, no vacuum degassing is necessary. The working time of making mold kit is 5 minutes at room temperature and the complete cure time is at least 12 hours at room temperature, it varies on your mold size and thickness. If it's s little sticky, please extend the curing time of silicone rubber
• GREAT FOR BEGINNER: If you're new to the mold making, this mold making kit is a perfect choice for you to try! No special skills or tools are needed. You could enjoy this fun and creative activity all day.HOW to CLEAN: If there's any spill, please clean with soapy water or rubbing alcohol.
• WIDE APPLICATION: It's very ideal for art craft use, DIY your own resin molds, wax molds, candle molds, use to make molds for resin, wax, soap, casting, etc. ATTENTION: Not for making food molds use.If you have any quesiton with our molds making silicone kit, please don't hesitate to contact us.

User questions & answers

Question:	What is the shelf life
Answer:	Go to the website, see if it is there. I used it within 6 months of buying. worked fine.
Question:	Can you make safe dog toys from this? And I mean completely safe for them to chew
Answer:	YES it's true, cured ArtResin can be safely used as a food contact surface! This means that when used as directed, cured ArtResin will not leach any substances into food that comes into contact with it, with that being said I wouldn’t advise to use as a chew toy
Question:	Can you create a body part mold with this
Answer:	Technically yes, but you’re limited to about 32 oz of material with one order. So....it depends on your purposes
Question:	how soft is this when it cures? I have a very delicate piece with some undercuts.. I need a mold that is like very soft and stretchy
Answer:	This is soft. Super easy to demold

Product description

Alumilite Amazing Mold Putty Kit

• Make your own molds for resin, food, soap, wax, clay and more with this amazing mold putty
• It is quick, easy and safe
• The entire process takes less than twenty-five minutes
• It is food grand and FDA compliant
• It requires no equipment, cups or stir sticks
• Easy to use by hand mixing 2 equal amounts of the yellow and white putty and cures within 20 minutes that gives users a flexible rubber mold with exact detail

User questions & answers

Question:	how does it work
Answer:	It's as easy as the instructions on the bottles...mix equal parts of the putty together, just like Play-Doh, and until you see that the two have no more streaks but it is one color. Then simply apply it and press the mixed putty on to your mold. In a matter of a few minutes you have your reusable mold hardened! What I like about this one is that it is food safe, excellent for lolly pops, ice cream, etc. Hope that helps you.
Question:	If you can use this for food, what is the highest temperature
Answer:	I have never used it for food but I have made charms with a high heat glue gun and they have survived. The highest I have baked anything in it has been 275 degrees. I don't know if boiled sugar or syrup will be too hot.
Question:	Does this make a flexible mold like rubber/silicone
Answer:	Yes it is, I believe it is a silicone. I've made lollipop molds and had no trouble bending them to retrieve the lollipop.
Question:	is this product reusable
Answer:	I am not sure exactly what you mean by "reusable" so I am answering this two ways. You can use a mold you make over and over again, I have not had one wear out yet. You cannot create another mold from one that you already made since the product hardens to form the shape you are wanting to duplicate. So once you create a mold it is not changing in my experience.It's a wonderful product and I use it quite often. You won't go wrong.

• PREMIUM - Ever thought about replicating the crafts that you love? Looking for the special silicone molds? Unleash your creativity and create unique silicone molds with our safe high-quality, non-toxic, no odor liquid silicone rubber!
• EASY TO USE - Our silicone rubber compound features a convenient 1:1 mix ratio, easy to mix and get flexible, viscosity free silicone molds. Make sure to stir the mixture thoroughly for better results.
• SELF-DEGASSING & CURE FAST - Self degassing within 2 hours characteristics makes it easy to create smooth finish. It will take 12 hours to cure completely at room temperature, it varies from the size and thickness.
• MULTIPURPOSE - Specifically formulated for resin molds making, wax molds, candle molds, soap molds, casting molds and making molds of architectural details, statues, figurines! ATTENTION:Not for making food molds use.
• COST-EFFECTIVE - Get better value for your money with our 600g silicone mold making kit. Whatever newbie or pro, you could easily create the molds you desire! Click ‘Add to Cart’ and enjoy your DIY craft making!

User questions & answers

Question:	Why did the price almost double
Answer:	Because it's worth it. I used it last night for my first ever silicone mold pour for a 14x14x1/8 tray. Had just enough for the job and it is soooo easy to mix.
Question:	Can a dye be added to color the mold? If so, what is recommended
Answer:	Hello, yes, here is the dye we recommend: https://www.amazon.com/dp/B07TDJKS6T Hope this could help.
Question:	What is the "Shore" rating
Answer:	45a - 50a I don’t have any measuring device but that’s my best estimate. Not as hard as a large pencil eraser, more firm than jello.
Question:	Once fully dried and cured, can the molds be placed in the oven with something like oven-bake clay inside of them
Answer:	Hello, we are not recommend to place this in the oven. Hope this could help.

Product features

Odorless & Toxic-Free

Ease To Use

Bubbles Free

Product description

Use this silicone mold making rubber for making perfect reproductions that capture intricate detail of original models. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time.

For the novice mold maker - OOMOO30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax.

Technical Information

Mixing Ratio: one to one by volume (100a:130b by weight)

Pot Life: 30 min.

Demold: 6 hrs.

Color: lavender properties (part a and b mixed)

Viscosity: 4,250 cps g/cc: 1.34 Cu. In./Lb.: 20.6

Tensile Strength: 240 psi

Elongation at Break: 250%

Die C Tear Strength: 40 pli

Compression Set: 37%

Shrinkage: .0025 In./In.

Net weight 16 oz. (454 Grams)

For Best Results: Store and use silicone products at room temperature. If material freezes, silicone base will become very thick. Simply allow product to get down to room temperature before use. Adult Supervision Required. Keep Out of the Reach of Children

• MIX RATIO: 1A:1B BY VOLUME - Easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessary *Packaging may vary*
• SHORE A HARDNESS: 30 - This scale measures the hardness of flexible rubber molds. A 30A hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser
• POT LIFE: 30 MINUTES, CURE TIME: 6 HOURS - This product cures at room temperature with negligible shrinkage. Best to store at room temperature, see "For Best Results" section below
• LOW VISCOSITY FOR EASY MIXING AND POURING - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary
• PERFECT FOR ART AND INDUSTRIAL APPLICATIONS - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax

User questions & answers

Question:	How many ounces is each bottle
Answer:	It is sold and labeled in Lbs.Part A is 1.2lbs and Part B is 1.6lbs and I can't find any label that provides info regarding ounces. The dimensions are almost the same size as a 16 oz bottle so it's close to 16oz per bottle but that it an estimate. Sorry I can't provide more info.
Question:	Is it enough liquid to make a 12" vinyl record mold
Answer:	Probably two orders of this would do that. Depends how thick you want your mold. When making molds always get more than you think you need. If you're pouring the mold and you run out then the mold is incomplete and useless. I don't know where you live but ordering directly from smoothon is usually faster. They have facilities in Texas and Pennsylvania. You can't beat their products.
Question:	is this heat resistant
Answer:	Not positive but aren't all silicones heat resistant. Great product.
Question:	How large of a mold will this usually make? One large one? a few small ones? or is there a specified size reccommended
Answer:	I molded an object with a volume of 37 ounces but it took a set and 1/4 of another set of these bottles. Safe bet that if you have a model with a displacement greater than the one I did, you need two sets. Some find the simplest way is to pour rice around your model then pour the rice into measuring cups to get a better idea of how much. The hollow mold that I made was about 11.5 inches high and 4 inches in diameter with a width of 1 inch on the sides and bottom of the mold. So.. to encapsulate a volume of 37 ounces with enough material so that the mold was free standing it was a set and 1/4 of silicone at the least. My mold did not have a top though, with a top, it would have been a set and a half, no question about it.

Product description

Miraclekoo Clear Silicone Rubber Silicone Mold Making Kit Liquid Mold Making Silicone for Resin Molds, Silicone Molds DIY Manual Making



Features:



Color: Clear, Weight: 7oz



Made of safe material,non-toxic and no odor, very flexible, soft and clear.



It's very easy to mix and great product for beginner to try!



Please Note:



Please store and use the silicone products at room temperature for better results.

If the silicone freezes, please allow it to get down to room temperature before use.

Please keep away from children.

Package Includes:



1 x Part A (3.5oz) 1 x Part B (3.5oz)

• EASY TO USE - No special skills or tools are needed.The silicone mold making kit includes part A and part B, the mixing ratio is 1:1 by weight. Pour the Part A and Part B together, then stir 5-6 minutes, make sure to stir the mixture thoroughly for better results.
• SAFE - Our silicone rubber is made of safe silicone material, high-quality,non-toxic and no odor, very flexible, soft and clear.
• PREMIUM ¨C Our silicone rubber with self-debubbling,the bubbles will automatically disappear within 2 hours, no vacuum degassing is necessary. The completely cure time is about 12 hours at room temperature, it varies from your mold size and thickness.
• WIDELY USE - Excellent for making resin molds, wax molds, candle molds, soap molds, casting molds and so on. ATTENTION:Not for making food mold use.
• PLEASE NOTE:mixing without using silicone cup and molding without using silicone mold.Because they're silicone, they will fuse.HOW to CLEAN: If there's any spill, please clean with soapy water or rubbing alcohol.

User questions & answers

Question:	Can these molds be used in an oven? I assume the silicone is not food grade but I'm thinking of using those with oven bake clay
Answer:	I use my torch on them that is the only heat I've used on my molds.
Question:	Can this product be used to make wedding bands
Answer:	I would use Alumilite High strength 3. It's sold here on Amazon.
Question:	Can I use this to create a mold for concrete
Answer:	I wouldn't. The material is rather soft when cured. Unless you're only making small items, no.
Question:	How much would i need to cast a mold of a round item 2.5 inches in diameter and about 3/4 of an inch thick
Answer:	The best thing I can tell you is this. Place the item in a suitable container that you can make a mold with. Add water to give you the volume you need as if you were making the mold. Pour the water into the same type of measuring container you would use to measure the compound with. Jot down the amount, or mark it on your container. That should give you an approximate amount of mold maker you should use. Always make a small amount extra, just in case.

• 100% reusable mold making material.
• Used, filtered ComposiMold, Works like new, but it is not food contact safe.
• Works great with Resins like ComposiCast, ComposiMold-Plaster, and more.
• Colors and shapes may vary from photos.

User questions & answers

Question:	Would this be too hot for rubber
Answer:	Hello, Rubbers that work very well with the ComposiMold include latex, silicone, ComposiMold, and many urethane rubbers. Some urethane rubbers do create quite a bit of heat during curing and can be more challenging. You can chill your mold to handle these higher temperatures. Other rubbers that are thermoplastic (melt) may be too hot. For example, hot glue can work in chilled molds, but I would recommend the ImPRESSive Putty instead as it can handle temperatures up to about 200 F. That is also the case for plasticol (PVC) type rubbers like those used in the fishing lures. ImPReSSive Putty can handle those temperatures a little better than the ComposiMold. Hopefully, that helps, but if I didn't answer about the type of rubber you're using, please send me a link to the rubber you're looking at using and I can give a more specific answer. Thanks! Stan at ComposiMold
Question:	Can I use liquid latex with a mold made from this or would it adhere to the mold
Answer:	Yes, liquid latex will work well with ComposiMold. The latex doesn't stick to the ComposiMold, but you can also use a thin coat of vegetable oil or baby oil as a mold release. Wipe the ComposiMold mold with the oil, and then wipe it off to leave a very thin layer of release oil. ComposiMold will also work if you make a latex foam. Thank you! Stan
Question:	what is the melting point of this ComposiMold? can I cast candle wax(melts@200*400*)carving wax with it? I do lost wax casting for silver casting
Answer:	ComposiMold melts at about 135 F. You can use it with Beeswax by chilling the mold first, but the lost wax is too hot. We do have the ImPRESSive Putty that can handle up to about 200 F and hotter if you chill the mold first. We have used the ImPRESSive Putty for the carving wax. We also have some videos of using beeswax for the lost wax process. Give us a shout and we can help. thank you!
Question:	What is the approximate volume (in cubic inches) that 3lbs of Composimold will fill when melted
Answer:	3 lbs of ComposiMold is approximately 70 cubic inches which is 39 fluid oz. or 1150ml.

Product features

ComposiMold Used is a Reusable Molding Material for Making Molds

ComposiMold Used ranges in hardnesses, but is usually about the same hardness as ComposiMold Used. It can be remelted and reused by melting in a microwave, double boiler, or chocolate melter.

Duplicate Hobby Parts

Soaps, Candles, and More

Be Sure to chill the mold if necessary

Resin Figures and Figurines

Works with resins such as ComposiCast Clear Casting Plastic

ComposiMold comes in Several Different Variations. ComposiMold Used is a combination of Flex, Original, and Firm

Product description

Smooth-On Oomoo 25 2 Pint Kit (contains 1 pint of part A and 1 pint of Part B) OOMOO Silicone Rubber - No Scale or Vacuum Chamber Required. OOMOO 25 is an easy to use silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). This silicone is easy to work with and has a very low viscosity for easy mixing and pouring. Vacuum degassing is usually not necessary. Takes excellent detail. Cures at room temperature with negligible shrinkage and good tear strength. OOMOO 25 features a 15-minute pot life and 75 minute cure time. OOMOO 25 & 30 are suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Tin cure silicone. Cures to an opaque blue-lavendar. Tip: *Do not cast platinum cure silicone into Oomoo silicone or any other tin cure silicone*

• Easy to use 1:1 by volume ratio . No scale required.
• Oomoo 25 - Fast setting 75 minute cure time. For quick turnover of molds. Sets FASTER than Oomoo 30.
• Cast with smooth-cast, plaster or resin! Also Popular for use with Pros-Aide transfers!
• Great for craft moldmaking, candles, replicas, home remodeling, jewelry, and more!
• East to use, equal parts A and B. Degassing is not necessary. Cures at room temperature.

User questions & answers

Question:	What mold release should i use with this rubber? (the smooth-on universal mold release says to not use it with silicone rubber
Answer:	Any universal mold release. Usually do not need a mold release with oomoo 25. Longer setting mold rubbers you usually do. Also depends on the item that you are molding
Question:	It left my resin pieces sticky how do you get them from not being sticky
Answer:	Could be 1 of 2 things 1. What you casted didn't let your silicone cure correct most 3d printed items do this you'll have to switch to the tin cured silicone not the platinum cured which oomoo 25 is. 2. You didn't mix your resin enough or the correct amounts.
Question:	can this be used for casting tin, which melts at 450 degrees
Answer:	NO! You need to use Mold Max 60
Question:	Can this be used to mold body parts? Hands, face, feet, etc
Answer:	I do not believe this is the intended use. It gets pretty warm. There are other products for molding body parts available. Luna Bean -XL- Family Size Keepsake Hands Casting KIT | Clasped Group Hand Holding & Molding Kit (Cast up to 6 Hands) or Alja-Safe Lifecasting Alginate 3-lb Box - Plaster Casting Kit by Smooth-On

Product description

Alumilite Amazing Mold Rubber Kit, 0.77 oz.

• .77 oz kit
• High strength liquid silicone rubber
• Good for complex and multiple piece molds
• Flexible and Demolds in 2-4 hours

User questions & answers

Question:	Can I use this to make molds of human body parts like fingers
Answer:	Because the cure time for silicone is long for body moldings, alginate is a much more common option. Although due to the high water content resisns will not cure in alginate. So unless you don't mind sitting with your finger in it for at least 2 hours without moving, would not recommend.
Question:	Can this be used to make a flat, thin mold of a textured design using polymer clay as the thing you are molding
Answer:	Yes but not too thin. Make sure the sides are high enough so when you pour your resin into the mold it doesn't run over the sides. Also, some resins might bend if they are too thin, so be careful unmolding.
Question:	How many good resin castings will I be able to make from one rubber mold
Answer:	I manage to make about 25-35 good castings from one rubber mold. After that, you can still cast, but there will be slight imperfections.
Question:	can you use this to make a mold of polymer clay statue
Answer:	I wouldn't recommend making a polymer clay statue, unless its something small. This product works best with resin casting.

Product description

Our products are developed and tested under highest conditions, being certified by all necessary standards of quality, in order to meet the rigorous expectations of our customers. The selection of our suppliers and manufacturers is based on careful screening processes that guarantee excellent products.

Why should you purchase this item?

Order this silicone mold making kit for creating lovely sculptures or replicas, use them as gifts to impress your loved ones or simply to decorate your room or home, and you’ll be amazed at the gorgeous results! This silicone set can be used for industrial projects as well, its low viscosity, easy mixing and one-on-one scale being perfect for the job.

Some of the amazing features of this product:

• Package includes special big containers for your convenience to be able to mix it directly in the compound itself. (Note: this is the reason why our product may look only half full, when in fact we contain way more than our competitors.)
• Premium quality materials;
• Perfect for beginners and experienced;
• One-on-one scale;
• Pot life:30 minutes;
• Demold: 6 hours;
• For best results, store at room temperature;
• Package includes 2 containers

ADD TO CART NOW and you’ll fall in love instantly with this silicone mold set!

• WHAT YOU NEED: Looking for a fun and creative activity that will get you out of that day to day routine? Do you enjoy making different DIY or art projects in your spare time? Now, we offer the perfect solution!
• PERFECT MIX RATIO: This silicone mold making kit includes 2 easy to use silicone rubber compounds with a practical one-to-one ratio by volume mix, allowing you to use it with no necessary scale.
• LOW VISCOSITY: You can easily mix and pour this rubber compound, creating one-block or two-block pieces or replicas with no vacuum degassing required. Let your imagination loose and the results will be astounding!
• IDEAL FOR HOME AND INDUSTRIAL USE: Whether you’re buying this creative silicone mold set for DIY, homemade art projects such as sculpture or prototype reproductions, or you’re planning on using it at an industrial scale, this is the perfect choice.
• FAST POT LIFT AND CURE TIME: It takes no more than 30 minutes for this compound to cure at room temperature, with no noticeable shrinkage, and a 6-hour cure time. For maximum results, store the products at room temperature!

User questions & answers

Question:	What is the max tempature the cured the silicon rubber mold will be good to
Answer:	400F or 205C is what the instructions state for the useful temperature range
Question:	i want to make molds of plastic, rubber and metal objects. do i need to apply silicone release agents on them before i use this product
Answer:	I have not needed to use any mold release. When making a composite mold, I use a spray of Crystal Clear to keep the parts of the mold from bonding.
Question:	can i use this to cast polymer clay which needs to be baked in an oven
Answer:	absolutely. i use it with superscalpy and it works great.
Question:	How much silicone mix comes in this kit
Answer:	There are 2 Containers included, and each one has a Product Net Weight of 22.4 oz.

Product description

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers.MIX RATIO: 1:1 by volume; POT LIFE: 50 mins; DEMOLD TIME: 4 hrs; SHORE A: 15; COLOR: Green

• TEAR RESISTANT - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*
• HEAT RESISTANT - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys
• CURING- Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding.
• VACCUM DEGASSING - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber
• MOLD PREFORMACE - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment

User questions & answers

Question:	What is the shelf life for parts A and B unmixed
Answer:	Hey mOWWck, the shelf life is about 1 year (usually slightly longer than that) if you do not use them. This is an approximate number and based on our experiences in keeping the products in our store. You should, however, place the products in a low humidity area to keep them longer. Do note that unused silicone last longer than unused resins before the products start gradually losing their properties (such as hardness etc.) Hope this helps and have a great day ahead!!
Question:	How well does this retain fine details
Answer:	It does a great job with details.
Question:	Is this enough to make a full set of rpg dice molds in small cups
Answer:	I ran out after 6 of the 7 dice. I used 4 oz cups and was barely able to make the six molds. The molds did turn out great, though!
Question:	Are these pints? I am looking for the volume, not the weight and I can't seem to find it
Answer:	They are pint bottles.

Product features

Smooth-On

Established in 1895, Smooth-On, Inc. is a leading manufacturer of silicone rubbers, polyurethane rubbers and plastics, rigid and flexible urethane foams, epoxies, polysulfide rubbers, adhesives, coatings, release agents and other material technologies.

Mind Blowing Materials for a World of Applications

You may never have heard of us, but you've seen our products at work. If you've ever been to the movies, admired a piece of sculpture, marveled at detailed architectural ornamentation or used a telephone; then you've encountered the handiwork of people who use Smooth-On rubbers, plastics, foams and other products to turn their ideas into 3-dimensional reality.

Being Successful Using Rubbers, Plastics and Foams

Smooth-On’s website has a world of information that you can access to learn best practices when using these materials. We have over 200 videos covering different topics that are easy to follow. Our FAQ library has answers to common questions associated with mold making, casting, and more. What are you waiting for? Make it now!

Home Crafts & Hobbies

Smooth-On rubbers, plastics and foams are ideal for a variety of home hobbies and arts & crafts projects. Easy to use OOMOO silicone mold rubber is perfect for the hobbyist and can be used to reproduce detail of any small or simple model.

Cosplay

Smooth-On liquid rubbers, plastics, foams, coatings and other materials are perfect for cosplay costuming. Make your own long lasting helmets, armor, props, masks, replicas and more.

Propmaking & Special Effects

Smooth-On rubbers, plastics, foams and other materials have been used for years to bring movies, TV and stage special effects to life.

Model Making

Model makers the world over know that Smooth-On silicone rubbers and liquid plastics as the perfect combination to reproduce their creations and drive production.

Makeup FX

Smooth-On's wide variety of platinum cure, skin-safe silicone rubbers are used to create realistic skin effects. Ecoflex and Dragon Skin super soft silicones have become the industry standard for creating silicone masks and more.

Candle Making

Smooth-On urethane and silicone mold rubber is used to make custom molds for casting wax. These materials are used by both the largest international candle making conglomerates and home hobbyists that enjoy making their own candles for family and friends.

Sculpture & Art Casting

Smooth-On urethane, silicone and polysulfide rubbers are used by thousands of sculptors and foundries for casting wax, resins, plaster, concrete and other sculpture materials to make accurate reproductions of original sculpture.

Architectural Restoration

Smooth-On products have been used around the world for over 60 years to restore old or create new architectural elements. Smooth-On mold rubbers are easy to use and offer maximum versatility for any restoration project.

Product description

Cuisinart presents the perfect waffle. Large, round, and baked to order. The classic round waffle maker has ready-to-bake and ready-to-eat indicator lights, and 5 browning settings. A regulating thermostat and weighted lid ensure perfect results, waffle after waffle. It's easy - with nonstick baking plates and stand-up storage. And it's good looking - in classic Cuisinart brushed Stainless Steel.

• Bakes one large traditional-style waffle
• Five-setting browning control
• Nonstick baking plates
• Brushed Stainless Steel housing
• Limited 3-year warranty
• Ready to Bake" and "Ready to Eat" indicator lights for easy operation
• Browning control with five temperature settings adjusts to bake light-to-deep-golden-color waffles
• 90 Day Manufacturer Warranty

User questions & answers

Question:	What size are the waffles
Answer:	The waffle measures six and a half inches
Question:	Was anyone else’s “wiggly” on arrival? The hinge is wiggly
Answer:	Yes mine is wiggly but it does not affect anything when you make the waffles. Once you put the batter in and put the top down it is fine. I make waffles about 3 times a week for my grandson. I LOVE this waffle iron and it makes the best waffles ever!!!!
Question:	Is it 110 v or
Answer:	I was about to respond 110v only, but not wanting to disappoint you, I pulled it out and checked it; 110 V ONLY.
Question:	Is this truly a traditional waffle maker or the Belgian style
Answer:	We chose it because it was not Belgian style.

Product description

Easymold silicone putty is ideal for a wide range of impression type mold applications, including castin'craft clear casting resin, easycast clear casting epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. Easymold is an easy to use, odor free, non-toxic, fda compliant - food grade, two component silicone putty.

• Easy to use, 3-minute working time, 25-minute cure
• Ideal for small molds, excellent detail from original
• Strong, flexible, reusable molds
• High Heat range, up to 400-Degree F
• Self releasing, no mold release agent required for most applications.

User questions & answers

Question:	Could I push(?) shape it around a delicate item such as a fruit, do you think the moisture from the berry would inhibit the curing process
Answer:	The silicone “putty” is pretty stiff, so it might deform the berries. But i dont think the moisture inherent in the berries would be a problem.
Question:	Forget my questions, its says Non-Toxic on the front of the box, but not in the description
Answer:	Mate, I make ear plugs from this stuff for pistol shooting etc. It is non-toxic. It is very good. I also wrapped some around my stereo ear plugs and they do not fall out anymore. Cheers, Cliff D
Question:	Will this hold melted lead
Answer:	No, the max temperature on this, as stated by the manufacturer, is 400°F. Lead melts at 621°F.
Question:	Can I mold one of those portrait cookie cutters with this
Answer:	I’m not sure what a portrait cookie cutter is, but this compound does not stick to anything, making it super easy to make molds! I used it over the summer to mold clam shells and it picked up every fine detail without sticking to the shells at all. Highly recommended.

Product description

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers.

User questions & answers

Question:	is this a flexible mold, meaning can I make reusable molds with it
Answer:	This will be used to make on form mold that can be used to cast several duplicates of the same pieces. Very flexible and durable. The details in your subject will determine how many times you can reuse it. I used a 2 piece mold and was able to cast 40 pieces from the same mold.
Question:	Can i make a silicone foot glove with this product
Answer:	This material is not designed for lifecasting. It is best used in a pour on mold application of an inanimate model. Body Double silicone is rated for skin contact.
Question:	I ran out this, if i add another batch of mix will it stick together and make one solid mold? or will it seperate
Answer:	It will stick together unless you use a release agent. I accidently forgot the release agent when making my 2 half mold and had to cut my model out and start over.
Question:	Can I use Epoxy Resin in this mold
Answer:	Yes. It works perfect, and picks up the slightest detail from the original piece the mold is made from.