14 best laser leather cutters

• LE-4040 engraver machine has a 5000mW, Class 4 laser unit, which can engrave and cut different kinds of material such as plywood, carboard, leather, acrylic, MDF etc. The laser focus is adjustable. Use Protective Eyewear while operating.
• Laser power range is S0-S1000. The maximum engraving speed is 3000mm/min. The X and Y axis are belt driven, which helps to reduce working noise.
• 10-20 minutes to fully assembly. Main parts are pre-assembled and no complicated installation. Simple and easy to start for both professionals and beginners.
• It is compatible with GRBL software such as Lasergrbl, Grblcontrol (Candle), Lightburn etc. It supports windows XP/7/8/10, Linux and Mac OS.
• This engraving machine has a large working area of 40 x 40 cm (15.75 x 15.75 inches), which is competent for daily engraving works.

User questions & answers

Question:	does it come with the software needed to run the machine
Answer:	no, but there is a good selection of free and reasonalable priced software. I use L ightburn for my laser projects
Question:	Will it connect to mac computer ? i’m a little disappointed that it’s not just simple to start and get started
Answer:	Im not sure, I have it connected to a super gamer computer, my husband who is in tech had to install it, he had to program all the quick buttons. Once you get it set it is easy to use and very precise.
Question:	Is this 7, 15 or 20 watt
Answer:	Our laser unit's eletric power is 5W, laser output is 3.5W-4W.
Question:	I need to cut through 1/4 white pvc sheets , can this do this and what other stuff can i cut
Answer:	This machine can cut and carve wood, MDF, plywood, cardboard, acrylic and leather. We don't recommend to cut PVC since the power is not enough. But it can carve on it.

Product features

Features

LE-4040 is designed with fast assembly and simple using. It enables hobbyists, amateurs and even beginners to explore the engraving world, to create their own works and have fun!

5000mW Module, Support Upgrade

Package includes a 5000mW, Class 4 laser module. It also supports up to 15,000mW laser. You can upgrade the machine anytime. (15,000mW laser sold seperately)

GRBL Control Board

The control board supports all grbl software such as Lasergrbl, Candle, Lightburn etc.

High Accuracy

The engraving accuracy reaches to 0.1mm.

Package List

• 1x LE-4040 Engraving Machine (Main Parts Pre-installed)
• 1x 5000mW module
• 1x Power Supply
• 3x Hex Wrench
• 1x USB Cable
• 1x U Disk
• 1x Goggle
• 1x User Manual
• Packs x Screws

Product description

Product description:

Item model number: ATOMSTACK A5 20W

Print Size: Recommend Print Size 410*400mm

Carving Objects:All wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal

Cutting Objects:Cardboard, non-woven fabric, light wood, Acrylic material, thin plastic board.

Laser power: 20W

Laser output power: 4.5-5W

Wave Length: 445 ± 5nm

Engraving accuracy: 0.01mm

Focusing method: fixed focus laser, no need to focus

Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.

Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.

Input Format: NC, BMP, JPG, PNG, DXF, etc.

Data transmission method: USB connection.

Input Voltage: AC100-240V, 50/60Hz

Output Voltage: DC12V, 5A

Equipment net weight: 4.0kg

Package weight: 5.6kg

Equipment size: 570*600*270mm

Packing size: 618*342*129mm

Certification: CE FCC RoHS FDA

A5 LASER ENGRAVER PACKAGE:

1 x  X-axis assembly

2×Section 57CM

2×Section 48CM

1 x control box

3 x support legs

1×Goggles

1 x laser

1×24V2A power adapter

1 x power cord

1 x USB cable

Step 1~5 installation package

1×M5 wrench

10×rolled belt

3 x small wood

1×focal length film

1×M3 wrench

1 x marker

1 x brush

3×small acrylic

• 👍【The Most Advanced Firmware】The laser master firmware, smarter, faster, higher precision and easier to use. The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
• 👍【High quality material】 Made of aluminum and acrylic, it is light, extremely resilient and durable. Universal standard power input: 100-240 V AC, 50/60 Hz output: 12 V, 5 A. The large area engraving interval of 410 x 400 mm can meet your various engraving needs.
• 👍【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac.
• 👍【Upgraded high-performance fixed-focus laser】No need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.
• 👍【Quality and Assurance】VROVE provides lifetime technical support and gives you a satisfactory answer. In the meantime, VROVE checks the most important components before delivery and offers technical support over the entire service life. If you have any questions, please contact us, we will solve the problem within 24 hours.

• 【Portable and Strong Light Design】The compact laser etcher can be take anywhere and powered by power bank; NO base design, NO limit on Engraving Height, Supported File Formats: JPG / BMP /PNG /G-code , Photo/Vector both supported
• 【Easy APP to Use and Accurate Precision】 Wirelessly bluethooth controlled by a smartphone; Greater power, faster speed, 0.01mm accurate precision engraving; Engraving range: 10*10CM: Four engraving modes, import images,text，drawing or painting directly; Recommended Focal length: 190mm-200mm（ the distance from laser mirror plane to the surface of engraved item）
• 【Durable and Safe】 Laser etching machine with high quality laser head make durablity, better stability and long working time; Working warning alert, motion-trigged stop, overheat shutdown, password lock will keep you safe from accidents: Safe Certification: CE, FCC, FDA, RoHS，CDRH,IEC 60825-1 (Laser Class1)，IEC 60825-1 (Laser Class 4)
• 【Materials can be engraved】 Wood, Paper ( NOT for white paper), Leather, Fruit, Felt etc
• 【Guarantee and Suitability 】30 days free replacement parts ,1-year warranty, and full life customer service; Good for beginners, professionals, hobbyists, carpenters, bakers, leatherworkers, designers, handcrafters, craftsman, craftspeople, craft enthusiasts, modeling enthusiasts, DIY handyman , maker, artist and small businesses If you encounter problems or malfunctions . Please email us laserpecker[at]hingin.com，we have the ability of solving any issues

User questions & answers

Question:	will this work for putting a logo on a cotton shirt
Answer:	plz make sure the color of cotton shirt will not llight, otherwise, it will decrease the laser power. Meanwhile, plz control the depth and the power of App, Or it will burn the shirt
Question:	Can you engrave names on a wooden pen
Answer:	yeah, it works on wood well
Question:	How do you turn it on? And how long does the first charge take
Answer:	Set up is less than 30 seconds once it is unpacked. It is ready to start your project as soon as you turn it on. It will take a while to upload your project to the laser, 3-15 minutes depending on the file size, and then it takes a while to actually etch the media. Our first project took exactly 1 hour. We etched a black and white photo of our kids first so it was a large file. The good news on that is you can start the project and walk away and come back when it is done.
Question:	Does it engrave on glass and metal
Answer:	My experience has been that it is NOT powerful enough to engrave glass or metal.

Product features

Laser Engaved Wood

Laser Engaved Leather

Laser Engaved Fruit

Laser Engaved Felt

Easy to Use & Locate The Engraved Position

Easy Start: Power & Connect with LaserPecker app by powerbank, choose or upload any pattern in-app and edit it

Preview Mode: LaserPecker Pro will first show a square on the target surface,which users can easily adjust the engraved size and position

Smart App

You can upload any pictures, create any patterns/text to the LaserPecker APP to engrave

It allows you to modify the pictures or drawings before engrave.

JPG / BMP /PNG /G-code,Photo/Vector both supported

In-App Editing Mode Setting

Choose a picture from your phone and choose your favorite mode according to different processing effects.

Engrave times will also depend on this factor.

More Fonts

More Fonts can be choose to create your idea

Engaved Horizontally

NO limit on Engraving Height

Engaved Vertically

Recommended Focal length: 190mm-200mm（ the distance from laser mirror plane to the surface of engraved item）

Powered by Power Bank

The compact laser etcher can be take anywhere and powered by power bank;

Laser Engraver Protective Case

Working warning alert, motion-trigged stop, overheat shutdown, password lock will keep you safe from accidents

Product description

Product description:

Item model number: ATOMSTACK A5 20W

Print Size: Recommend Print Size 410*400mm

Carving Objects:All wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal

Cutting Objects:Cardboard, non-woven fabric, light wood, Acrylic material, thin plastic board.

Laser power: 20W

Laser output power: 4.5-5W

Wave Length: 445 ± 5nm

Engraving accuracy: 0.01mm

Focusing method: fixed focus laser, no need to focus

Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.

Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.

Input Format: NC, BMP, JPG, PNG, DXF, etc.

Data transmission method: USB connection.

Input Voltage: AC100-240V, 50/60Hz

Output Voltage: DC12V, 5A

Equipment net weight: 4.0kg

Package weight: 5.6kg

Equipment size: 570*600*270mm

Packing size: 618*342*129mm

Certification: CE FCC RoHS FDA

A5 LASER ENGRAVER PACKAGE:

1 x  X-axis assembly

2×Section 57CM

2×Section 48CM

1 x control box

3 x support legs

1×Goggles

1 x laser

1×24V2A power adapter

1 x power cord

1 x USB cable

Step 1~5 installation package

1×M5 wrench

10×rolled belt

3 x small wood

1×focal length film

1×M3 wrench

1 x marker

1 x brush

3×small acrylic

• 👍【The Most Advanced Firmware】Mathrose laser master firmware, smarter, faster, higher precision and easier to use. The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
• 👍【High quality material】 Made of aluminum and acrylic, it is light, extremely resilient and durable. Universal standard power input: 100-240 V AC, 50/60 Hz output: 12 V, 5 A. The large area engraving interval of 410 x 400 mm can meet your various engraving needs.
• 👍【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac.
• 👍【Upgraded high-performance fixed-focus laser】No need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.
• 👍【Quality and Assurance】Mathrose provides lifetime technical support and gives you a satisfactory answer. In the meantime, Mathrose checks the most important components before delivery and offers technical support over the entire service life. If you have any questions, please contact us, we will solve the problem within 24 hours.

• 【Wide Application】LaserPecker pro engraver with small & lightweight design engraves on a wide variety of materials, like Paper-board, Fabric, Wood, Leather, Felt,Cloth,Fruit and more. The Easy Etcher can widely be used in Engraving, Carving, Etching etc. 【Note: Plastic 】Painted the plastic with oil-based or whiteboard pen first to engrave then wipe the color off. 【Cannot 】for Stone,Metal,Glass
• 【 In-App Editing & Preview Mode to Control Smartly & Work on nearly any surface and tiny objects】 In-App Editing Mode allow to create any patterns and words, modify the pictures or photos to engrave, features many picture editing toors; Preview Mode will let users can easily adjust the size, position, and the rotation angle of the pattern on the target surface by projecting a guide laser before engraving；This unique laser etcher can engrave on any surface or on tiny objects
• 【More Accurate Precision】LaserPecker Pro has 0.15mm accurate light spot and high quality 405nm blue-violet laser, making accurate precision engraving; NO limit on Engraving Height; Works with powerbank; Wirelessly bluethooth controlled by a smartphone; 10,000 + lifespan built for long-term usage; Engraving range: 100*100MM; File Formats: JPG / BMP /PNG /G-code , Photo/Vector both supported.The most compact and easy-to-use laser engraver of its kind
• 【More Accessories can be Choosed 】 Auto-focusing Support Stand: The built-in sensors of the stand will measure the distance in seconds and automatically adjust laser focal point to the right height； Magnetic Protective Shields: Protect your eyes and directly see laser movements in the progress of engraving without wearing protective glasses： Big Case : Take all accessories in one easily.
• 【Safe and Guarantee】LaserPecker Pro has built-in protections to ensure safe use: overheat shutdown, password lock, motion detection,goggles; Safe Certification: CE, FCC, FDA, RoHS，CDRH,IEC 60825-1 (Laser Class1)，IEC 60825-1 (Laser Class 4) ; 30 days free replacement parts ,1-year warranty, and full life customer service

User questions & answers

Question:	Cual es el area de grabado util
Answer:	Yes, it can be used with the laser kits to extend laser engraving function.
Question:	I want to order laserpecker l2 for glass or metal. is it available yet
Answer:	Yes.
Question:	Will it engrave hdpe plastic (natural color
Answer:	You would need to change out the nozzle for something hardened like a Ruby one but the printer is more than capable of the temp and speed requirements.
Question:	Does this come in more than one box? I ordered the Super, but I received one box with no instructions and no carry case
Answer:	Dear Client, thank you for question. So far the laser engraver doesn't support cylinder shapes, it can only engrave flat objects. We have recorded your requirement, maybe in the future we will develop such features as we continue to upgrade SHARK. If you have any other questions about our products, please feel free to contact us. Always at your service. Have a nice day.

Product features

Laser Engaved Paper

Laser Engaved Leather

Laser Engaved Wood

Laser Engaved Cloth

Laser Cut Paper

Use G-code with Inkscape to cut the paper more easily and fast

Laser Engaved Color Paper

Painted the paper with color powder first to engrave then blow it away

Laser Engaved Color Wood

Engraved a few butterflies first and colored with iridescent paints

Laser Engaved Plastic

Painted the plastic with oil-based or whiteboard pen first to engrave then wipe the color off

Easy to Use & Locate The Engraved Position

Easy Start: Power & Connect with LaserPecker app by powerbank, choose or upload any pattern in-app and edit it

Preview Mode: LaserPecker Pro will first show a square on the target surface,which users can easily adjust the engraved size and position

Smart App

You can upload any pictures, create any patterns/text to the LaserPecker APP to engrave

It allows you to modify the pictures or drawings before engrave.

In-App Editing Mode Setting

Choose a picture from your phone and choose your favorite mode according to different processing effects.

Engrave times will also depend on this factor.

Fonts

More Fonts can be choose to create your idea

Auto-focusing Support Stand

LaserPecker Pro is upgraded with an auto-adjusting support stand that sets up and focuses in seconds.

All you have to do is put the engraving target on the spot.

The built-in sensors of the stand will measure the distance between the laser generator and the target and automatically adjust the height to make sure the focal point is the correct distance from the surface of the object.

Portable & Longterm Usage

LaserPecker is the most compact and easy-to-use laser engraver of its kind. Just grab it and put in your bag, your pocket art studio is ready to work anytime and anywhere.

Safety

LaserPecker Pro has built-in protections to ensure safe use: overheat shutdown, password lock, motion detection,goggles etc

Big Case

LaserPecker Pro can be put in one bag to take it everywhere, which you can engrave what your want anytime

Product description

Specifications

Engraving Depth: 2mm

Laser Head Lifespan: 10,000 hours

Engraving mode: bitmap engraving, bitmap gradation engraving, contour cutting, black and white image, grey-scale map, reverse, seal

Image format: JPG, BMP (24bit), TIFF, PNG (below 32bit), PCX (8bit and 24bit), PCD

Operating system: Windows, Android, iOS (computer software can be compatible with mac OS)

• The small size can be simply set on the desktop, the bracket can be disassembled and assembled, and the bracket can be used as goggles, saving transportation space. Appearance of fashion patents and up to 8 software copyrights. Through mobile power and DC power, you can engrave anytime and anywhere
• 1600mw German OSRAM unique laser chip and efficient heat dissipation and precision glass lens combination, without manual focus setting. The output of the laser head is stable, can work continuously for more than 10,000 hours, and the engraving depth can reach 2mm. The engraved pattern is improved by the sophisticated XY module, and it is not easy to fade. Replaceable laser head
• Carving: wood, ceramics, cardboard, cardboard, bamboo, leather, fruit peel, fruit core, rubber, plastic, metal surface coating, cutting: goat skin, paper card, non-woven fabric, EVA, etc.
• The mobile APP (mini laser engraving machine) has rich functions and is continuously updated. Multi-layer editing, text editing, eraser, free Jesto zoom, accurate setting of size and coordinates. APP includes firmware upgrade, users use APP, function is repeated, product upgrade, original packaging can be updated. If you use the storage function, you can save the photo to the phone's album

User questions & answers

Question:	What is the engraving range (area
Answer:	working picture 98x88mm In addition, this machine has excellent fast engraving mode
Question:	Could I engrave baseball bats with this
Answer:	sure， it can engrave on wood. paper. plastic. leather. and colored metal
Question:	Can you import custom logos and/or photos
Answer:	Yes, you can add any of your own pictures. And this machine also has fast engraving mode. You can have a try.
Question:	Can you engrave a urn for human ashes
Answer:	/Duration 0:26Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:26 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } yes , if the material is glass or ceramics then okay , but need put a black thin film on its surface

Product description

Description:

This mini laser engraving machine with high precision and high stability is great for DIY engraving.Unique frame and weak light automatic positioning.Adjustable blue laser head, high speed and support more types of materials.

Protective glasses included?

Not included. The mini laser engraving machine has been upgraded, Glasses is relpaced with protective board, safer than before, please rest assured to buy.

What about the laser head life?

Normally, about 3 months to 1 year, but it's also closely related to how you use it. Main factors include: temperature, time intensity, current, voltage, anti static treatment, etc.

How to judge the laser head burned?

1. When the machine is working, the light was significantly weakened.

2. When the machine is working, the light is scattered and weakened, and unable to focus.

3. It can't burn out the object when the burning time, carving material and focal length are right.

3 Months Warranty for Laser Head:

If burnout problem of the laser head arises during warranty period, we will offer replacement laser head for free.

NOTE:

1. It can not engrave metal, acrylic and any other retardant material.

2. To prevent the laser head from burning out caused by overheating, please turn off the machine for at least 5mins after 30mins continuous working.

Specifications:

Material: Acrylic Aluminum Stainless Steel

Main Color: Black

Power: 3000mW

Laser Wave Length: 405nm

Image Format: bmp,jpg,png

Supply Voltage: 4.2-5.5V

Supply Current: 1A

Work Area: 38 * 38mm

Item Size: 6.30 * 5.71 * 7.48in

Item Weight: 976g / 34.43oz

Package List:

1 * Engraving Machine

1 * Whiteboard Marker

2 * Paper

1 * Wood Block

1 * Protective Board

1 * Allen Wrench

1 * Focusing Film

1 * USB Cable

1 * Power Cable

1 * Power Adapter

1 * User Manual(English)

• This laser engraving machine features the function of print carving and more practical than normal engraving machine.High precision and high stability
• Compatible with win xp SP3, win7 win8, win10 / OS X 10.10 or higher, 64-bit
• Professional power IC and radiator, carving time will last much longer and carving performance will be more stable than other lasers
• Wide application: Items can be carved including Wood, Bamboo, Rubber, Paper Cards,Mobile Phone Case, Ivory, Leather, Dark Plastic, etc.Can be used for print, hand tools and industrial processing.(It can't engrave metal or glass)
• Engraving range: 38 * 38mm. Please read our User Manual carefully before use. If you have any questions, please feel free to contact us

User questions & answers

Question:	Would this work on silver
Answer:	Shpuld be around 11 ½. Use a search engine site to search for ring size chart and look for your specs.
Question:	The description mentions mahogany. Can it be used on other woods
Answer:	For me they were the same size
Question:	Will it do ink pens
Answer:	Honestly I would go to a jeweler and measure his finger and order that size. They are silicone so they do have a little stretch l. Hope this helps
Question:	will it work with a MAC
Answer:	I think all products ordered through Amazon/prime have free returns. But I'm honestly unsure. I think though if they don't fit you could gift them or resell locally to recoup some of your cost.

Product description

Prodction Description:

Item model number: ATOMSTACK A5 20W

Print Size: Recommend Print Size 410*400mm

Carving Objects:All wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal

Cutting Objects:Cardboard, non-woven fabric, light wood, Acrylic material, thin plastic board.

Laser power: 20W

Laser output power: 4.5-5W

Wave Length: 445 ± 5nm

Engraving accuracy: 0.01mm

Focusing method: fixed focus laser, no need to focus

Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.

Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.

Input Format: NC, BMP, JPG, PNG, DXF, etc.

Data transmission method: USB connection.

Input Voltage: AC100-240V, 50/60Hz

Output Voltage: DC12V, 5A

Equipment net weight: 4.0kg

Package weight: 5.6kg

Equipment size: 570*600*270mm

Packing size: 618*342*129mm

Certification: CE FCC RoHS FDA

Assembly Introduction :

Step 1~6 installation package

1×M5 wrench

10×rolled belt

3 x small wood

1×focal length film

1×M3 wrench

1 x marker

1 x brush

3×small acrylic

• 1.New eye protection design:The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
• 2.Solid and easy installation structure design:The full-metal structure design makes the machine more solid, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes.
• 3、Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.
• 4.Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
• 5.Precise scale lines axis :There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs.

User questions & answers

Question:	I misplaced my manuel is there a digital version
Answer:	Dear, it cann't work on silver. I am sorry.
Question:	Is the height of the laser adjustable
Answer:	Yeah it will be fine
Question:	Is software included
Answer:	The curved surface will be difficult, unless you're doing straight line engraving
Question:	Does the object have to be flat
Answer:	YES,It can work with a MAC.

• ✅【Wide Compatibility】：The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
• ✅【High Performance Fixed Focus Laser】：No need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.
• ✅【Eye Protection Design】：The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
• ✅【Solid & Easy Installation】：The full-metal structure design makes the machine more solid, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400 mm large area engraving interval can meet your various engraving needs.
• ✅【Attention】：When operating the laser engraving machine, please install the laser protective cover or wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.

Product features

ATOMSTACK A5 20W Laser Engraver

20W CNC Laser Engraver DIY Logo Mark Printer Cutter Engraving Machine

Full Metal Structure

• Full-metal structure makes the machine more solid, and improves the accuracy of engraving.
• All-metal structure can be quickly installed within 15-20 minutes.

Eye Protection Design

• With a protective enclosure, watch laser engraving without wearing goggles.
• Filter UV light for 97%, perfectly protect from eye damage.

Fixed-Focus Design

• Fixed focus laser, no need to focus. The laser focal spot is smaller.
• Working 1200h, the laser power decreases 0.1W. The laser power is more stable.

Precision Engraving

• With precise scale lines on the X-axis and Y-axis, quick length measurement.
• 410x400mm large area engraving interval can meet your various engraving needs.

Wide Compatibility

• Operating software: Compatible with LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.
• Input Format: Support NC, BMP, JPG, PNG, DXF, etc.
• Data transmission method: USB connection.

Widely Applicable Materials

• Carving Objects: All wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal
• Cutting Objects: Cardboard, non-woven fabric, light wood, Acrylic material, thin plastic board.

Actual Work Display

• Reliable laser engraving machine offer yearlong peace of mind.
• Turn your imagination into reality at the speed of light.
• Affordable and user-friendly DIY laser engraving machine.

• While conventional laser cutters are bulky and heavy, beamo has the same footprint as four letter-sized sheets of paper and weighs less than 50 pounds.
• Just take a picture, upload it using your phone, align the design, then let beamo do the rest. Prefer drawing by hand? Easily transform your sketches into digital files by using our Smart Trace software. Smart Trace is also perfect for kids or students who love to draw or paint. Inspire them by engraving their work onto hundreds of objects.
• Beamo Studio’s compatibility with JPG / PNG / SVG / DXF file formats makes it easy to just use the graphics editor that’s best for you -- Adobe Illustrator, Autocad, Inkscape, CorelDraw, Silhouette Studio or even Microsoft Word or Powerpoint.
• Engrave detailed patterns, intricate text, and beautiful images for gifts, home decor, or just for fun. Narrower than the width of a human hair, beamo’s laser engraves with 0.05mm layer spacing. The high 1,000 DPI resolution will amaze you.
• Explore new creative possibilities with hundreds of materials. Shape, cut, and engrave on a wide range of materials including wood, leather, acrylic, fabric, cardboard, stainless steel, anodized metal, glass, cement, and much more. Beamo works on almost anything you can think of! Do not start COLD unit! Wait for it to get to room temperature.

User questions & answers

Question:	Will this cut mdf board 1/8 inch
Answer:	Yes, I’ve made several parts using 1/8 mdf. Make sure you exhaust outside though
Question:	I make small cutting boards. Can I use this engraver for a 5"x9"x3/4" board
Answer:	The work (cutting/engraving) area is 300mm x 210mm or 11.81" x 7.68"
Question:	Will it cut intricate patterns in paper
Answer:	Absolutely!
Question:	Does it come with the rotator for working with cylinder shape items
Answer:	If you decide to buy the rotary, it attached easily and quickly. I was lasing glass within minutes. I practiced on old bottles and by the end if the day had put my logo on 5 different glasses and bottles. Worked great.

Product features

FLUX proudly presents beamo, a powerful laser with the smallest footprint ever.

FLUX proudly presents beamo, a powerful laser with the smallest footprint ever. This never-before-seen design marries cutting-edge technology with their simplicity, maximizing quality and functionality. Beamo packs in features you usually find only in industrial-grade laser cutters to give you the power to create something that you’ll love.

Explore new creative possibilities with hundreds of materials.

Explore new creative possibilities with hundreds of materials. Shape, cut, and engrave on a wide range of materials including wood, leather, acrylic, fabric, cardboard, stainless steel, anodized metal, glass, cement, and much more.

Engrave detailed patterns, intricate text, and beautiful images for gifts, home decor, or just for fun.

Engrave detailed patterns, intricate text, and beautiful images for gifts, home decor, or just for fun. Narrower than the width of a human hair, beamo’s laser engraves with 0.05mm layer spacing. The high 1,000 DPI resolution will amaze you.

Colorful LCD Touch Screen

Bring your ideas to life with beamo and make personalized gifts for your loved ones, beautiful home decors, or transform your designs into a successful business. The online Beamo community provides an enormous range of inspirations and resources to help you make amazing things.

Make your beamo the only Maker Space you need!

beamo has the same footprint as four letter-sized sheets of paper and weighs less than 50 pounds. Its super portability makes it a perfect fit for your home, office, design studio,>Safety is a top priority. They've implemented several safety mechanisms to make sure that you’re safe:

• Full enclosure: The work area is fully contained, protecting you from the laser light.
• Smart lid sensor: The machine automatically pauses if the lid is opened during a task.
• Emergency power switch: Though very unlikely, if an emergency occurs, users can shut down the machine immediately with a single switch.
• Compact water cooling system: Closed-loop liquid cooling system that pauses the task if the temperature gets too high.
• Integrated ventilation system: The ventilation fan produces 340CMH (200 CFM), helping to prevent fires while extracting smoke and fumes.

• MOTORIZED WORKBED: This 60W CO2 laser engraving and cutting machine by Orion Motor Tech provides an ample 28x20 inch workspace made even more useful by the machine's honeycomb and knife blade engraving platforms and motorized bed, eliminating tedious manual adjustment and speeding production
• WORK LARGE PIECES EASILY: The wide front and rear pass-through doors allow you to work on even larger pieces by sliding them through the machine as it works; a built-in air assist quickly blows away smoke, dust, and sparks; and the large-capacity bin underneath the workbed collects your debris as you work for easy cleanup
• RUIDA CONTROLS & SOFTWARE: This laser engraver's Ruida panel features advanced functions to help you perfect your sophisticated engravings; its convenient LCD screen provides complete control over the laser marking process; and the RDWorks v8 and CorelLaser software suite gets you started carving your designs into wood, leather, plastic, rubber, and more right away
• SAFETY FIRST: In addition to the air assist and automatic debris collection, a digital laser power supply provides sure & easily monitored operation; password & key protection prevents unauthorized use; and the wide viewing cover includes tinted eye protection & automatically cuts power when opened
• INSTALLS QUICKLY, LASTS YEARS: Our CO2 laser cutters have been rigorously tested and we back them with our usual strong warranty and friendly 24/7 customer service to provide you a worry-free purchase, an easy installation, and a great product!

User questions & answers

Question:	Does machine come pre assembled
Answer:	I have sent you the electronic file instruction manual through Amazon.
Question:	Does the machine come in higher wattage versions (80/100w)? I am aware of the bigger model but that one will not fit my shop
Answer:	The height can be adjusted.
Question:	Does this machine come with a power supply
Answer:	You can use free software LaserGRBL, but I recomended lightburn software ($40 and You can install it on 2 machines). Please search for both programs in Youtube.
Question:	Shipping cost to my location
Answer:	yes,The object must be flat。

Product features

Bring your ideas to life with Orion Motor Tech's laser engraver series!

This 60W CO2 laser engraver continues to uphold our previous high standards with its Ruida control panel, included RDWorks 8 and CorelLaser software suite, LCD display, spacious 20x28 inch working area, and pass-through doors that allow even larger pieces to be worked on.

To get things right, this laser cutting and engraving machine provides dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger harder substrates like acrylic blocks. The engraver's 86 stepper motor raiser and lowers either workbed at the push of a button to make your work even more convenient and efficient. In addition to quality, durability, and the usual long service life, this laser cutter is also highly practical, with a built-in air assist blowing dust and debris away from the laser head and into the large-capacity bin below for easy cleanup at end of day.

Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale. Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision. With OMT's careful engineering, quality materials & assembly, and good name, you can do no better for all your marking, engraving, and cutting projects at home or in your workshop.

Power Supply with Digital Display

The digital power supply displays real-time power information when the machine is running. It also has a test feature to speed troubleshooting if any problems develop.

Ruida Control Panel

The new Ruida control panel offers complete and intuitive control over your projects, making your engraving easier and more efficient.

Honeycomb and Knife Beds

This engraver includes 2 workbeds, one honeycomb and one blade, for handling projects large and small with maximal safety and efficiency.

Safe Observation

The transparent acrylic window's sepia filter allows you to observe your engraver in action with complete safety, as the tint blocks the laser beam and protects your eyes.

Front & Rear Pass Through

As with all our laser engravers, this one includes front and rear pass-through doors to allow it to process materials much bigger than the bed itself.

Built-in Waste Collection

Debris and dust generated during cutting and engraving automatically falls into the built-in waste hopper for easy collection and cleanup.

Electronic Lift

Either workbed can be automatically raised and lowered at the push of a button for more efficient processing.

60W Laser Tube

The powerful CO₂-filled laser tube is both stable and long-lasting, with a MTTF of more than 3000 hours.

Leather

Wood

Acrylic

Glass

Product description

Make magical things at the push of a button.



What if you could sketch a design, then turn it into something real you could actually use? What if you could print things you wanted, needed, or just dreamed up on your desk, instead of relying on factories half a world away?



Meet Glowforge. It uses a beam of light the width of a human hair to cut, engrave, and shape designs from a variety of materials.



There’s a lot you can do with that kind of power: it’s having the perfect gift when you need one. A way to furnish your space. A personal boutique. A sandbox for your inventions. A launchpad for your business. And that's just the start.



Three steps to a finished product.



Step 1: Make Your Design

Whether you craft for fun or you’re an experienced designer, it’s easy to bring your ideas to life. Use dozens of different design software packages – everything from high-end CAD software to PowerPoint. It takes PDF, SVG, JPEG and other common file formats. Designing can also be as simple as drawing with a pen – Glowforge has onboard cameras that will scan your drawing and transform it into a digital file you can print, once or a hundred times.



Step 2: Pick Your Materials

You can use all kinds of materials with Glowforge – things like wood or leather, fabric, cardboard, acrylic, and even chocolate. In fact, you can print on hundreds of materials – a river rock, secondhand lumber, your iPhone. It’s up to you, but to make things easy, you can use our line of Proofgrade materials. They’re finished and come encoded with automatic settings for perfect printing every time.



Step 3: Watch the Magic Happen

Hit print and watch your Glowforge go. It works on a PC, it works on a Mac, and we have apps for iPad and iPhone – so you can create with just your fingertip. See your finished product in minutes.

Human accessible laser power: less than 0.1 mW CDRH/IEC Class 1 laser product

• YOUR IDEA, IN YOUR HANDS, IN MINUTES – Push the button and the powerful 40 watt laser creates meaningful gifts for your friends, unique products to sell, or something personalized just for you.
• SIMPLY AUTOMATIC– Autofocus. Material detection. Automatic print settings. Just pick your drawing, PDF, or photo, add one of dozens of household materials, and click print.
• FREE SOFTWARE & 30 MINUTE SETUP– There's nothing to install - the free app works with your PC, Mac, phone, or tablet.
• LASER PRECISION with DOZENS OF MATERIALS – Precise to the width of a human hair. Carve up to 1/2" deep, 11" tall, and 19.5" wide, at over 1,300 lines per inch. Engrave or print beautiful and useful products from wood, leather, paper, fabric, acrylic, glass, metal, cardboard... even chocolate!
• SAFE FOR HOME AND SCHOOL – The only CDRH Class 1 laser cutter and engraver. Independently safety tested to UL, CE, FDA, and FCC standards for peace of mind.

User questions & answers

Question:	What’s included
Answer:	Your Glowforge Plus comes with everything you need to get started: the Glowforge unit, power cord, a 4" dryer hose for ventilating to the outdoors, and a sample set of Proofgrade Materials!
Question:	What are the ventilation requirements/methods
Answer:	The Glowforge Plus comes with an 8-foot, 4 inch wide exhaust hose to vent to the outside through a window or a dryer vent.
Question:	Will this engrave metal/aluminum
Answer:	Yes. The Glowforge Plus marks some metals, like anodized aluminum, directly. Other metals, like stainless steel, need to be sprayed with a product like Cermark for better contrast. Unlike many materials, the marking process does not remove metal, so it stays smooth to the touch.
Question:	Does this work offline
Answer:	The software is web based so you'll need an internet connection to start your print. It works well with slow connections, and once your print starts, it can finish offline.

Product features

Create stunning 3D engraved products.

Make unique items to gift, keep, or sell.

Transform your home with custom decor.

Explore where your inventive ideas take you, from prototype to product.

The key features that set Glowforge apart:

Step 1: Make Your Design

No matter your skill level, it’s easy to bring your designs to life. Use the software you know. Glowforge is compatible with everything from PowerPoint to Adobe Illustrator to high-end CAD software. Or, just use a pen. Onboard cameras will scan your drawing and turn it into a digital file you can print, once or a hundred times.

Step 2: Watch the Magic Happen

You can use dozens of materials with your Glowforge, including wood, leather, fabric, cardboard, acrylic, and even chocolate. Our app makes it easy to preview your design on the material and position it exactly where you want it. When you’re ready, hit print and watch your Glowforge go.

Step 3: Customize and Assemble

See your finished print in minutes, then customize or assemble your work. All that’s left to decide is if you’re going to gift it, keep it, or even launch your own creative business by selling it! We can’t wait to see what you create.

Product description

You can buy this cutting die and make a card holder for you or your girlfriend or friends.

Material:Japanese steel,durable and sharp

• You can buy this cutting die and make a card holder for you or your girlfriend or friends.
• Material:Japanese steel,durable and sharp
• Size of cutting die: see from the picture/ Finish wallet Size: 65*100mm
• Usage:Use the hammer to hit the cutting die,put your leather under the cutting die(the smooth side of the leather need to be upturned,usually)2.use the hammer hit the back side of the cutting die

Product description

Specifications:

Material: Aluminum alloy + stainless steel + CNC composite

Control Model: NEJE windows software, NEJE android APP, “NEJE Wireless” APP for iOS and macOS, Benbox for windows, LaserGRBL for windows. OFF-Line

Support System: Win7 / Win8.1/ Win10 / Android Phone ( Android 5.0 and above ), iOS Phone ( ios10.0 and above ), MacOS ( 10.15 and above )

Applicable Materials: Alumina oxide Metal and other non-reflective materials, (Wood, gray paper, leather, bamboo, blackening plastics, rubber, ect.), Can not work on the stainless steel, alloy, glass, and some reflective materials.

Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)

Wavelength: 450nm

Input power: approx. 12V2A ≈ 20W (without fan power)

Output optical power: 5.5W

Image Format: BMP .JPG .PNG .NC .DXF

Image Size:2266 * 2266pixels / 0.075mm point distance

Machine Supply Voltage: 12V3A

Control line installation method: pluggable

Focus range: 30-50mm

Best focal length: 40mm from the light exit

Note: NEJE Master comes standard with 12V2A charger. If you want to upgrade your old machine, you need to prepare another 12V3A power supply.

• 【New Version 450nm 20W laser tube】New version 20W Master Laser CNC Cutter with APP Control (for Windows, Mac , Android) excels in fast cutting and can cut materials from 3mm to 8mm thickness. t can cut wood (3-8mm). Depth of engraving (0.5-3mm wood), thickness of cutting(2mm). 4Pin laser design with temperature sensing and surge protection design can effectively extend the laser life.
• 【Off-Line Working & Large Working Area】 Multi-functional keys can support offline work: press 1 time to reset automatically, press 2 times to perform frame positioning, press 3 times to start engraving, press 4 times to stop engraving. Engraving range: 150 * 150mm or 160mm x 160mm in GRBL mode , accuracy up to 0.075mm point distance, 2000*2000px ultra-clear printing effect
• 【Protection function】Built-in gyroscope protection device. When the laser engraver machine is running, the built-in gyroscope will record the working position at the beginning. In the event of an accidental touch or machine shift, the machine will automatically stop working to prevent an accident.
• 【Easy to Operation】Provide professionals with the ability to directly parse the works designed by Inkscape and CAD software, directly execute .nc files and .dxf files, and execute them accurately. You can do the complex edits in PS / Inkscape / CAD or similar and just burn with the included program.
• 【Full-featured & Powerful】4A load current, capable of delivering powerful output power, 15,000 rpm fan and exquisite heatsink design, can keep temperature safe control within 60 degrees Celsius, maximizing protection laser life, no matter how high-intensity you use, no matter how you work how long. Full-featured that directly execute .BMP, .JPG, .PNG files and NEJE CLOUD provides thousands of engraving materials and resources to download and keep updating.

User questions & answers

Question:	Is 20 watt faster? I have a 4.5 and it’s slow
Answer:	hi， the 20W laser machine is faster ,and it's specific for cutter wood, if you are mainly need for engraving ,we would recommend 7W laser engraver machine
Question:	My nje master is not advancing. just burning the entire image on one line. can you help me resolve this problem
Answer:	Depends on what software you use. I had luck with the mobile apps and burning a bitmap file. The "CNC" mode leaves a bit to be desired and I had trouble with it
Question:	Will the software it comes with work on a Mac
Answer:	yes, our laser engraver works for Mac, MacOS ( 10.15 and above ).
Question:	What warranty does this item has
Answer:	30 days